User manual
Table Of Contents
- Contents
- Preface
- Installation Overview
- Confirming the CMOS Settings and Configuring PCI Adapters
- Confirming the SCSI Adapter Settings
- Installing Microsoft Windows NT Server 3.51
- Installing Microsoft Windows NT Server 4.0
- Installing Windows NT Server 4.0 Enterprise Edition
- Installing Netware
- Installing SCO UNIX
- Installing UnixWare
- Installing OS/2
- Installing MP-RAS
Confirming the CMOS Settings
2-4 Confirming the CMOS Settings and Configuring PCI Adapters
IDE Drive 3 (xxx MB) None
On Board IDE Disabled
6. Press Esc to return to the main menu in BIOS Setup.
7. Select Advanced System Configuration.
Page 1 - Verify that the parameters are set as follows:
E0000h - FFFFFh (System BIOS) Enabled
C0000h - C7FFFh (Video BIOS) Enabled
C8000h - CBFFFh Disabled
CC000h - CFFFFh Disabled
D0000h - D3FFFh Disabled
D4000h - D7FFFh Disabled
D8000h - DBFFFh Disabled
DC000h - DFFFFh Disabled
L1 and L2 Cache (CPU Cache) Enabled
Cache Scheme Write Back
ECC/Parity Mode Selection ECC
Operation of ECC Correction Enabled
Setting for SNA Cards Disabled
Memory at 15 MB-16 MB Reserved for System Use
8. Press Esc to return to the main menu in the BIOS Setup.
9. Select System Security. On Page 1, set the parameters as follows:
Disk Drive Control
Diskette Drive Normal
Fixed Disk Drive Normal
System Boot Drive Drive A Then C