User Manual

NCR Orderman7 Operation
Orderman GmbH 35 V 01.02
11.5.1 Display settings
Pull down the Status bar to open the Configuration menu.
 Tap "Settings".
 Tap "Screen".
The following settings are available:
Function
Value
Effect
"Control automatically"
☑
Enabled
The brightness setting is automatically
controlled by the ambient light sensor.
"Control automatically"
□
Not activated
The brightness setting can be adjusted
manually using a slider shown in the display.
"Screen timer"
in seconds
5 to 60
Defines the time after which the display dims
when it is not in use.
"Sleep timer"
in seconds
30 to 180
Defines the time after which the display turns
off when not in use.
Note: The display settings contribute significantly to the power used by the
handheld. Reduce the brightness for a longer operating time.