User Manual Chapter 4

4-4 Chapter 4: Installing DecisioNet Software on a Windows NT or Windows 2000 System
• After all files are installed, the Finished screen displays
indicating a successful install. Customer-specific configuration
settings are required before rebooting the system to Chapter 6,
“Configuring the DecisioNet System Environment,” for
instructions on how to configure and start the DecisioNet
software. Click Finish or press Enter.
Installing the Scan-Merge Package
Install the Scan-Merge Package software using the following set of
instructions.
1. Click the Start icon at the bottom left of the screen.
2. Select Run.
3. Insert Scan-Merge Package CD in your CD-ROM drive.
4. Use the Browse button to locate the SPSETUP.EXE file on the CD.
Select this file and select Open.
The path and file name display in the Run dialog.
5. Select the OK button or press Enter to start the installation.
The installation displays a series of screens in the following
sequence.
• A Welcome screen appears. Click Next to continue the
installation or Cancel to quit.
• A License Agreement screen appears. Click Accept to continue
the installation or Decline to quit.
• Enter the destination Install Folder. Select the default (\dnet)
or select Browse to locate the destination directory of your
choice. It is recommended to accept the default.
• A Print Package Executable screen appears. Enter the location
and executable name of the print package program installed on
your PC. Click Next to accept the default (c:\program
files\bartender\bartend.exe), or select Browse to locate and
identify the print package on your PC.