User's Manual

Customizing the DecisioNet System D-5
The second parameter specifies the maximum number of records LDM
reads at one time when checking for description field changes. The
larger this number the faster LDM performs the checks. However,
LDM reads this number of records into memory, so more memory is
required for larger values.
LDM Parameters in the Application Configuration File
The parameters set using the Label Data Manager configuration screen
in EPL Administration are in the esappl.cfg file. The following list
identifies the default parameters. Changes should only be made using
the configuration screen.
"LDI_DBIT_FLAG", "ALL"
"MAX_QKPRINT_FILES", 5
"MAX_CHGPRINT_FILES", 5
"MAX_ALLPRINT_FILES", 5
"MAX_SELPRINT_FILES", 5
"MAX_DATPRINT_FILES", 5
The following parameter is set when the EPL Information Messaging
System Package is installed to tell the system the extended LDM
functionality is present. This parameter should not be edited and
changed.
LDM_INSTALLED,1
The following parameters identify the names and locations of the start
script and stop script files and whether the start and stop scripts are
enabled for printing. In a DecisioNet Windows NT system, these files
must be created to meet your system-specific printer requirements. In a
DecisioNet UNIX system, default shell script files are provided and
must be modified to meet your system-specific printer requirements.
The enable options are set using the Label Data Maintenance screen in
EPL Maintenance application. These parameters should only be
changed through this screen
"LDI_START_SCRIPT", "C:\epl\bin\prescript.bat"
"LDI_STOP_SCRIPT", "C:\epl\bin\postscript.bat"
"LDI_START_ENABLED", 0
"LDI_STOP_ENABLED", 0