User's Manual

Configuration Files C-39
configuration problem. Use the ESADMIN base config menu option to configure
antenna C.
2719, "Receive antenna D off error message identifies a problem with receive
antenna D or CBS receive antenna D port. The error may also occur when receive
antenna D is improperly configured using ESADMIN.
2720, "Unconfigured receive antenna D error message indicates a hardware
configuration problem. Use the ESADMIN base config menu option to configure
antenna D.
2721, "Signal level threshold error message indicates a CBS Manager thresholding
problem. Ambient noise in the environment is causing EPL communication problems.
Call your NCR Field Engineer immediately.
2722, "Noise level threshold error message indicates a CBS Manager thresholding
problem. Ambient noise in the environment is causing EPL communication problems.
Call your NCR Field Engineer immediately.
2803, "Log Monitor not configured as interactive error indicates that the Log
Monitor service was not configured properly. Click on the "startup" button on
the services dialog box, and enable the "allow service to interact with desktop"
option.
3000, "Unable to start as service error message indicates that the Windows NT
service could not be started. Use the Windows NT service dialog box to start the
service manually.
3005, "Unable to communicate with EPL Table Manager error message indicates that
the Table Manager was not started properly. Stop and restart the Table Manager.
If the problem persists, stop and restart all base software components."
3006, "Unable to communicate with PLU Reader error message indicates that the PLU
Reader was not started properly. Stop and restart the PLU Reader. If the
problem persists, stop and restart all base software components."
3007, "Unable to communicate with Data Scheduler error message indicates that the
Data Scheduler was not started properly. Stop and restart the Data Scheduler.
If the problem persists, stop and restart all base software components."
3008, "Unable to fork a child process error message indicates that the user is
out of resources. Tune system and user parameters.
3009, "Unable to open a new virtual terminal error message indicates that the
system is out of resources. Tune system parameters.
6115, "The price is too large to be displayed on the tag."
7707, "Unable to open the master IDX [USERIDX.TXT] file. - Defaults will be
used."
8501, "Invalid or non-existent AMS Configuration file."
9003, "Unable to open the PLU file. Check to see if the ACS system is running."
EPL Backup Information File (eplbackup.ini)
This file identifies which files are backed up when the EPL Backup
Utility is run. Wildcard (*) entries are used. Refer to the
/appl/epl/data/ directory following installation to determine which
files are included in the backup. Additional files may be added.
[Backup Files]