User's Manual

C-2 Configuration Files
DecisioNet Windows NT Configuration Files
The following sections show the default configuration files in a
DecisioNet Windows NT system.
Base Software Configuration File (basesw.cfg)
The following is an example basesw.cfg file. It contains an explanation
of each parameter in the file. Some parameters are set using the EPL
Administrator configuration screens. Use an editor to set the
CBSCOMM_PORT parameter from the DOS system prompt.
Caution: Many of the parameters are commented out with a # symbol
in the first character position. The values shown are system defaults
used by various DecisioNet programs and utilities. They are intended
for reference purposes only, and should NOT be edited or changed
except by trained NCR personnel.
#################################################
#COMMON
#################################################
"EPL_TYPE", 1
#################################################
#CBS MANAGER
#################################################
#When this value is non zero, the CBS Manager will retry
# with a greater batch size when current batch size is
# smaller. [0]
#"EPLCOMM_RETRYPLUS,0
#Uplink channels for time slot 1/4/7/10,2/5/8/11,3/6/9/12
# (1-5) [2,4,5]
"EPLCOMM_UPLINKCHANNEL","2,4,5"
# Batch size of group 0 for pooling messages
# (1,2,4,8,16) [1]
"EPLCOMM_BATGRP0",1
# Batch size of group 1 for pooling messages
# (1,2,4,8,16) [1]
"EPLCOMM_BATGRP1",1