Tus neeg siv phau ntawv

- 96 -
10.technical specifications
Unless otherwise stated, the technical data apply only to oscilloscopes with a set probe attenuation of 10X.
The technical data only apply if the oscilloscope fulfils the following two conditions: at least
The unit should run continuously for 30 minutes.
Perform "self-calibration" if the operating temperature changes by up to or even more than 5 (see
"Performing self-calibration").
All technical data, with the exception of those marked "typical", can be met.
Performance features
Notes
Bandwidth
P 1340
P 1341
P 1355
P 1356
P 1360
P 1362
P 1363
P 1370
P 1375
60 MHz
100 MHz
60 MHz
60 MHz
100 MHz
200 MHz
300 MHz
60 MHz
100 MHz
Channels
P 1340
P 1341
P 1355
P 1356
P 1360
P 1362
P 1363
P 1370
P 1375
4 CH
4 CH
2 CH
2 CH
2 CH
2 CH
2 CH
4 CH
4 CH
Vertical resolution (A/D)
P 1340
P 1341
P 1355
P 1356
P 1360
P 1362
P 1363
P 1370
P 1375
8 bit
8 bit
12 bit
12 bit
12 bit
8 bit
8 bit
8 bit
8 bit
Capture
Mode
Normal, Peak Detect, Average
Waveform capture
rate
P 1340
P 1341
P 1355
P 1356
P 1360
P 1362
P 1363
P 1370
P 1375
45,000 wfms/s
45,000 wfms/s
75,000 wfms/s
75,000 wfms/s
75,000 wfms/s
75,000 wfms/s
75,000 wfms/s
45,000 wfms/s
45,000 wfms/s