Tus neeg siv phau ntawv

- 82 -
Multimeter Recorder
Please refer to Appendix D for information on the multimeter's recording function.
7. communication with the PC
This touch screen oscilloscope series can be integrated into a network via LAN or connected directly to a
PC via USB for data recording. To connect, proceed as described in the following sections.
USB Interface
1. Connection: Use a standard USB cable and connect it to the USB device port on the back of the unit.
2. Driver installation: Install the PC software from the enclosed CD. The USB driver will be installed
automatically.
3. Port settings in the software: Start the software and click on "Connections". Select "Ports Settings"
and in the following menu under "Use Connection" click on "USB". Under "Available Ports" the detected
oscilloscope is listed and in the main menu "automatically check USB" is displayed in green writing in
the lower left corner. With the arrow key next to the lettering, you can reinstall the USB driver if necessary.