Tus neeg siv phau ntawv

- 71 -
5. arbitrary function generator
The oscilloscope has an integrated single-channel arbitrary function generator with 25 MHz. The generator
provides 4 basic waveforms (sine, square, ramp and pulse), as well as 46 integrated arbitrary waveforms
(e.g. noise, exponential rise, exponential fall, sin(x)/x, stair step). You can also create your own waveforms
and save them internally or externally on USB.
Connection
Press the Utility button, then Function in the lower menu. Under the Output setting in the left menu under
Type, select AG Output so that the BNC socket on the back of the unit is used for the generator.
Connect the BNC cable to the BNC socket marked Out on the back of the unit.
Channel settings
Press the OUT key to switch the output on and off. The corresponding symbol (values) is displayed in the
upper left corner of the screen when the output is switched on.
Signal settings
1. Press the AFG key to display the generator menu.
2. Select the desired waveform in the lower screen menu .
3. The corresponding menu with the settings of the selected waveform appears on the right edge of the
screen.