Tus neeg siv phau ntawv

- 68 -
Help function
1. Press the Help button and the overview appears.
2. Press Prev Page or Next Page to scroll through the help topics or use the M-rotary knob and the touch
screen function to select.
3. Press OK if you want to view details of the theme.
4. Select Quit to leave the help menu again.
Executing keys
The executing keys are AUTOSET, RUN/STOP, SINGLE and COPY.
Autoset
This key is used to automatically set all the control values of the unit needed to generate a viewable
waveform. Press the AUTOSET key; the oscilloscope then performs a quick automatic measurement of the
signal
The following table shows the parameter values of the AUTOSET function:
Menu
Setting
Vertical Coupling
Current
Channel Coupling
Current
Vertical Scale
Adjust to appropriate pitch.
Bandwidth
Full
Horizontal Level
Medium or +/- 2 div
Horizontal Scale
Adjust to appropriate pitch.
Trigger Type
Slope or video
Trigger Source
CH1 or CH2 (2 channel) or CH1 to CH4 (4 channel)
Trigger Coupling
DC
Trigger Slope
Current
Trigger Level
3/5 of the waveform
Trigger Mode
Car
Display format
YT
Force
Stop
Help
Leaving
Pass/Fail
From
Inverted
From
Zoom Mode
Leaving