Tus neeg siv phau ntawv

- 52 -
Save and recall waveform
Press the Save button to open the Save menu at the bottom of the screen. Here you can save waveforms,
configurations, screenshots or record waveforms as a movie.
Menu
Setting
Description
Type
Wave
Configure
Image
Record
Clone
Select memory type
Configuration
Create screenshot
Record waveform as a film
Clone waveform between cursors on generator
If the type is Wave, the menu shows the following:
Source
CH1 - CH4
Math
Select the waveform to be saved
Object & Show
Object
0-99
Select the address/memory number where the
waveform is to be stored or retrieved
Show
ON
OFF
Recall or close the waveform stored in the currently
selected address. When "Show" is ON, the waveform
stored at the address is displayed, the associated
address number and relevant information is shown in
the top left of the display. If the memory address is
empty, a message "None is saved" is displayed.
Close All
Closes all waveforms that are stored under the object
address.
Save
Saves the waveform at the selected address.
Regardless of the type selected in the Save menu, you
can always save the current waveform directly as a
BIN file with the Copy button, without having to take a
diversion via the Save menu.
Storage
Internal
External
Saves to internal or external memory (USB). If the file
is saved to an external USB memory, you can set the
file name yourself and call up the saved file via the PC
software supplied.
If the type is Configure, the menu shows the following:
Configure
Setting 1
.....
Setting 8
The address of the settings to be saved
Save
Saves the current oscilloscope configuration at the
selected memory address.
Load
Recalls the saved configuration from the selected
memory address
If the type is Image, the menu shows the following:
Save
Saves the current screen completely with all displays
as a screenshot. This is only possible on an external
memory, so please connect a USB memory first. Data
format is BMP