Tus neeg siv phau ntawv

- 50 -
Display menu Settings (in Acquire)
Press the Acquire button; select Wave Display, XY Mode or Cymometer as the setting.
Description of the Acquire menu:
Display:
Press the Display menu selection button. In the lower selection menu, select Type and press the button to
switch between Dot and Vect.
Afterglow (Persist ):
With the Persist function, you can simulate the afterglow effect of a tube oscilloscope: the stored original data
is faded, the new data is displayed in vivid colour.
(1) Press the display button
(2) Select Persist from the bottom menu
(3) Use the right menu buttons or the touch screen operation to change the afterglow of the display between
OFF, 1second, 2second, 5second and Infinity. If you select Infinity, the waveform will continue to be
overlaid until you change this setting again or press the Clear button. Select OFF to turn off the afterglow
and "clean" the display of the superimposed waveforms.
(4) Select Clear to clear the already displayed overlaid waveforms from the display and start the afterglow
again
Colour
The colour temperature function uses colour correction to indicate frequency of occurrence. The hot colours
like red / yellow indicate frequently occurring events and the colder colours like blue / green indicate rarely
occurring events.
(1) Press the display key.
(2) Select Persist & Colour from the bottom menu.
(3) Select Colour in the right menu, choose between ON
/ OFF.
Menu
Setting
Description
Type
Dots
Vect
Only the sample points of the waveform are displayed.
The space between the sampling points is connected with
a line.
Persist
Time
OFF
1 sec.
2 sec.
5 sec.
Infinity
Persist adjusts the afterglow of the waveform. Use the
multi-rotary control ( ) to change the value settings.
"Infinity" means maximum persistence.
XY Fashion
ON
OFF
Turns on the XY function.
Switches the XY function off.
Counter
ON
OFF
Switches frequency counter ON and OFF
Clear
Clears the afterglow waveforms from the display and
restarts the afterglow.