Tus neeg siv phau ntawv

- 4 -
Warning:
If the oscilloscope is connected to an input signal greater than 42V peak (30Vrms) or circuits greater
than 4800VA, please follow the instructions below to avoid fire or electric shock:
-Use only insulated probes and test leads.
-Inspect all accessories before use and replace if damaged. If in doubt, do not take measurements.
-Remove the USB cable connecting the oscilloscope to the computer.
Never exceed the maximum specified input voltages. Since the voltage is transmitted directly to the
oscilloscope with the aid of the probe, the unit may be damaged or there is a risk of injury from electric
shock.
-Do not use exposed BNC or banana plugs.
-Do not insert any metal objects into the connections.
Cleaning the appliance:
Before cleaning the appliance, disconnect the mains plug from the socket. Clean the appliance only with a
damp, lint-free cloth. Use only commercially available detergents.
When cleaning, make absolutely sure that no liquid gets into the interior of the unit. This could lead to a
short circuit and destruction of the unit.