Tus neeg siv phau ntawv

- 103 -
Menu
Setting
Description
Type
Clone
Source
Fashion
Out1
Out2
Out1&Out
2
Select the source mode.
The cloned waveform contains a waveform that is used for AG Out1
The cloned waveform contains a waveform that is used for AG Out2
The cloned waveform contains two waveforms that are used for AG Out1 and
AG Out2
AG
Output
Out1
CH1 CH2
CH3 CH4
Selects the source that is used for the generator Out1
AG
Output
Out2
CH1 CH2
CH3 CH4
Selects the source that is used for the generator Out2
Line
a
b
from
x
Turn knob M to move line a.
Turn the knob M to move the line b.
Two cursors are linked together. Turn the M knob to move the pair of cursors.
Set the cursors so that the whole screen is automatically selected.
The waveform information is displayed in the lower left corner of the screen.
Note: If "Out of Limits" appears in the information or in the message
"Waveform points over- the limit". appears on the screen, i.e. the length of the
cloned waveform exceeds the limit. If the source mode is Out1 or Out2, the
maximum length is 2M. If the source mode is Out1 and Out2, the maximum
length is 1M. Press the Acquire button, select Length in the bottom menu and
set the recording length to a smaller value.
Clone (for
generator use)
Clone
Clone the waveform between two cursors and output it via the built-in
generator.
Save
Save
Saves waveform between cursors
Storage
You can select one of the four objects in the list on the left. When you select
an object, a message appears in the centre of the screen displaying the
information of the selected object.
"Current object: Out1 has no output, Out2 has no output" means that no
waveform is stored in this object.
"Current object: Out1 has output, Out2 has no output" means that a waveform
is stored in this object whose source mode is Out1.
"Current object: Out1 has no output, Out2 has output" means that a waveform
is stored in this object, the source mode is Out2.
"Current object: Out1 has output, Out2 has output" means that two waveforms
are stored in this object, its source mode is Out1 & Out2.
External
Save the waveform to a USB storage device. Insert a USB memory device
into the port on the front. If the icon is displayed at the top right of the
screen, the USB storage device has been successfully installed. If the USB
storage device cannot be recognised, format the USB storage device
according to the methods described in "USB disk requirements". The name is
default as the current system date and time. The cloned waveform is saved
as an OTA file on the USB storage device.
Output
(The generator is available and the internal memory is selected.) Outputs the
waveform stored in the selected object.