User's Manual

X350 and X550 User Manual
Page 20
Windows Server 2008 user account management screen
Windows Server 2003 user account management screen
9. When the License wizard screen is displayed, enter the name of the person that
will be maintaining the vSpace software on this system. You must also enter the
person’s company, select a location country from the dropdown menu, enter
street address, city, state/province, zip code, and phone number, reseller/dealer
name where the product was purchased, and select the type of expected product
use from the second dropdown menu. Then click “Finish.”
10. At the "vSpace successfully installed" screen, click “Close” to end the installer,
and select whether or not to immediately restart the computer (a restart is
required before vSpace can be used).
The vSpace software will then be installed.
NOTE: During installation, you are prompted to enter a default resolution setting for the
X-series stations. After installing the software, you can change the resolution for all
stations connected to a single card from the Management Console. See the sections on
the Management Console for your version of vSpace later in this manual for instructions
on how to set the resolution.
IMPORTANT: Now proceed to the next section to register and activate your system
(required for operation beyond 30 days and for sessions longer than 1 hour during the
trial period).