User's Manual
29
2929
29
A: Windows provides a firewall that displays a security warning message when a new port is used (see
below). If you click the “Keep Blocking” button, you will not be able to find NComputing servers. If
you select the “Unlock” button, the port will open unless you block it manually. If you select the “Ask
Me Later” button, the port will open temporarily and the security message will continue to appear when
the port is accessed.
Q: What kind of games are supported ?
A: Generally 2D games are supported at the moment. Casual games (Java and Flash), which can be
played on the Internet, are also supported. High performance 3D games, which require a high speed
GPU (Graphic Processor Unit) and a hardware accelerated function, are currently not supported. Other
games including single user games which require a CD for operation are not supported. A game, which
is designed to be used only on the same computer by checking the IP, is not supported. Windows itself
checks out those specifications and rejects more than one loading, and thus those games are not
supported.
Q: Why is the X300 Graphic Controller installed three times ?
A: Up to three access terminals can be connected to the PCI Card. The Graphic Controller is installed
three times for the three terminals.
Q: How can I install the PCI Card to a slimline computer ?
A: The PCI Card can be installed to a slimline computer by using the included low profile bracket.
W: Does the installation of the PCI Card allow multiple screen operation?
A: Yes. You must choose between multiple user or multiple screen operation. You cannot run both at
the same time.
To enable multiple user operation, follow all the instructions in the installation section of this user
guide. To enable multiple screen operation, only install the X300 bus enumerator and graphics drivers.
Do not install the terminal services software. Then, right-click on the desktop and select “Properties.”
In the “Display Properties” window, select the “Settings” tab. Select an external screen and check the
“Extend my Windows desktop onto this monitor” setting.
163-0044 Rev.B