User's Manual

22
2222
22
• Pointer Id: what type of pointer interface is used.
The “Station Settings” tab shows parameters that can be set for each station.
Here is a description of each parameter that can be set in this window:
• Station name: The name of the station.
• Automatically turn station on when system starts: If this is turned off, the station will not
start when the system boots up. After this, if you want to start the station, you must turn this on.
• Enable “Shut Down” option without logging on to the station: If this is turned on, access
terminal users see the shut down options in the logon window. This means the host PC can be
shut down without a valid user logon. If this is turned off, the shut down options are not visible
until the user logs on.
• Enable “Auto Logon” mode: When this is enabled and there is an entry in the “username” and
“password” fields, the specified username is automatically logged in when the station starts.
• Run this program only during Logon: When you select a program to run and the folder where
it is located, the program is started when there is a logon using the station.