PC Expanion표지 2006.10.
Hardware specification regarding PC Expanion L100, L120, and L200 L100 L120 L200 Dimension 8.46inch(W) x 6.30inch(D) x 1.57inch(H) 9.57inch(W) x 5.31inch(D) x 1.57inch(H) 9.57inch(W) x 5.31inch(D) x 1.57inch(H) Weight 0.83 lb 0.81 lb 0.
Copyright Disclaimers NComputing Co., Ltd. has all rights reserved in respect of this User's Guide including patent rights, trademark rights, copyright and other intellectual property rights. No part of this User's Guide may be copied or reproduced in any form or by any manner without the prior permission of NComputing Co., Ltd. The use of the contents of this User's Guide in whole or in part may result in prosecution.
Classifications and descriptions of signs FCC Information to Use The following descriptions for the correct use of the product must be referred to by the user in order to prevent any physical injury occurring from unexpected danger, or any loss of assets which may be caused by damage to the product. This equipment has been tested and found to comply with the limit for a class B digital device, pursuant 15 of the FCC Rules.
Notice Thank you for purchasing our company's product. This product has been made by using state of the art technology from NComputing and has undergone thorough testing. An understanding of reliability has been reached for this product due to extensive testing. This User's Guide is designed to help the user to achieve easy installation and use of the product.
CONTENTS Part 1 Product Features Part 5 Updating the NCT-2000-XP application via the Internet Part 6 NCT-2000-XP Remote Management Console Part 7 Using the “Setup” What is the PC Expanion ? 1-1 Features 1-1 System Minimum Requirement 1-2 OS (Operating System) and Maximum Connection Limit 1-3 PC Expanion Conceptual Diagram 1-3 How to use the PC Expanion 1-4 Part 2 NCT-2000-XP Installation Part 3 Setting up Network Configurations Connecting to the network using a cable or DSL router 3-1 Connecting
Part 8 Using the PC Expanion (Advanced) 1. How to add a new user account 8-1 2. How to check the IP address setting of PC Expanion 8-5 3. How to check the IP address of the host PC. 8-7 4. How to connect between the PC Expanion and the host PC using network equipment. 8-9 5. How to connect the PC Expanion to the host PC directly 8-11 6. How to connect to the specific host PC 8-13 7. How to connect to the specific host PC automatically 8-16 8.
21. How to set the password of the NCT-2000-XP program 8-29 22. How to use the USB port in case of L2XX model series 8-29 23. How to change the name of the PC Expanion 8-30 24. How to run a specific program when the PC Expanion connects to the host PC 8-31 25. How to manage grouped PC Expanions under the NCT-2000-XP program 8-34 26. How to manage when a user forgets the password of the NCT-2000-XP program 8-36 27. How to add or remove the serial number of NCT-2000-XP program 8-37 28.
Part 1 Product Features What is the PC Expanion ? The PC Expanion is a unique networking device using WoIP(Windows over IP) or LoIP(Linux over IP) networking standards. Users can share the resources of the host PC system by connecting a PC Expanion terminal(s) to it, providing the benefit of having several networked PCs. Users can connect one or more PC Expanion terminals to one host PC directly using a LAN adapter and cable or via the network using a switch/router.
System Minimum Requirement The minimum hardware requirements To connect one PC EXPANION terminal to a single host PC, the following system requirements apply : Intel Pentium 4 1.3 GHz processor with at least 512 MB RAM or higher. To connect two to three PC EXPANION terminal(s) to a single host PC, the following system requirements apply : Intel Pentium 4 2.4 GHz processor with Hyper - Threading technology with at least 512 MB RAM or higher.
OS (Operating System) and Maximum Connection Limit PC Expanion Conceptual Diagram ● Windows 2000 Professional : 10 units (L200 model does not support Windows Windows Windows Windows Linux this operating system.) ● Windows 2000 Server : 30 units (L200 model does not support this operating system.
How to use the PC Expanion 1 Install the PC Expanion (Refer to the Quick Installation Guide ) 2 Install the NCT-2000-XP application on the host PC 3 Setup the network configuration 4 Turn on the PC Expanion, set up the PC Expanion 5 Click the “Connect” button 1-4
Part 2 NCT-2000-XP Installation 1 Insert the software installation CD into the CD drive. Turn on the host PC and insert the Software Installation CD into the CD drive after your computer boots up. 2 Click button. The installation program will start automatically. When the installation screen appears, click “Install Main Program”. Note Message similar to the one shown here will appear if your Internet is not connected.
5 Click button. The installation program will start automatically. When the installation wizard screen appears, click “Next”. 7 Select ‘I agree’ and then click the button. Once the license agreement window appears, check "I agree" and click "Next". If you do not agree with the license agreement, click the "Cancel" button to finish the process. If you would like to print this out, please click “Print.” 6 Click button.
9 Click the button. Note Read the contents of the readme file and click “Next”. If you would like to print this out, please click “Print”. If you want to install it in another path, type the path directly or click the button and select the desired folder. 11 Click button. If the same screen as the one shown on the right appears, select the item that you want to install after confirming the following reference and click “Next.” 10 Click the button.
Network Control Console : A management application that manages local user groups and can also manage individual computers and the connected PC EXPANIONs 12 Click the button. 14 Add user accounts. When the program installation is completed, the message screen for adding new users will appear.(Refer to the screen) For more details, please refer to "Create a new account" of operating system and “1. How to add new user accounts” in Part 8.
Part 3 Setting up Network configuration Connecting to the network by using a cable or DSL router 3 Select the ‘Network’ tab. Then Select ‘Get Dynamic IP address’ and click the button. (The PC Expanion uses the “Get Dynamic IP address” option as the default. No additional settings are required.) You need to configure the network to connect with any PC Expanion terminal(s).
Connecting by Using a switch (Supports 100Mbps switching) To connect by using a switch, you need to set a static IP address on both the PC Expanion terminal and the host PC. To configure an IP address as static, follow these steps : 4 With the L120 and L200 models, the list of host computers is displayed in the startup screen of the PC Expanion. The other models list the host computers when a user clicks the “Connection to” drop-down list.
Part 4 Product Registration The user must be registered in order to receive continuous support such as upgrades of the application software and after Sales service. The following method can be used for registering the user via the Internet. Note 2 When the message window on the right appears, please input the ‘Administrator Password’, and then click on the button.
Note Personal information protection policy The NComputing Inc. highly values any personal information which is provided by customers. NComputing Inc. observes the personal information protection provision clause of the "laws related to the use and promotion of information and communication networks" and the "guidelines for personal information protection" which were enacted by the Ministry of Information and Communication of the Korean government. NComputing Inc.
3 A window for user's information registration appears. Please click on the button to correct the information, or click on the button to continue the registration.
3 A window with user's information registration appears. After checking the information with which the user has provided, please click on the button to correct the information, or click on the button to continue the registration. Note If you would like to change the path, click the button. 5 The following message window will appear to inform of the successful 4 Please select a directory for creating the offline registration file completion of the registration.
6 Please send the file to the registration center or agent. The registration center or agent will send out a text file which can be used for registration of the serial number. This option is used to register the serial number by using a text file. Note If you would like to cancel the registration before receiving the activation key, you can select the “Offline – Cancellation of registration” option and then select the serial number that you would like to cancel.
Unregistration 2 Please select the serial number with which you wish to unregister, and then click on the button. After registering the serial number, if you wish to replace the computer which is currently being used with a new computer, or to modify the hard disk, the serial number must be unregistered before cancelling the installation of the NCX-2000-XP program.
4 The registration of the serial number starts when all of the information has been inputted correctly. Please take note that the unregistration cannot be completed successfully if the computer is signed off or if the Internet is disconnected before the registration is completed. 2 Please select the serial number with which you wish to unregister, and then click on the button. 3 A window for user's information registration appears.
4 A file creating process is required for the unregistration of the serial number. Please confirm the destination of the storage and the name of the file, and then click on the button. The storage folder is ‘My Documents’ and the file name is ‘URGF serial number.txt’. If you wish to change the storage location, please click on the ‘Change’ button to select a new destination. Note 5 Please send the created file to the registration center or agent.
Part 5 Updating the NCT-2000-XP application via the Internet A user who has successfully completed the registration process can update the NCT-2000-XP program by using the following methods. Updating with the application installation CD which is included In order to update the NCT-2000-XP program via the Internet, users must have completed the registration process. Without registration, updating the software will not be possible.
4 Please click on the button so that the user can compare Note the program in the NCT-2000-XP server against the program which has been currently installed. If you do not want to install the latest NCT-2000-XP version right now, save the program the file type and click the button. Then select the “Save the program in the disk” option. The default folder is the installed NCT-2000-XP folder in the hard disk drive.
Part 6 NCT-2000-XP Remote Management Console Remote management of the NCT-2000-XP is automatically implemented with the installation. When the installation of the application is completed, the NCT-2000-XP group is automatically created in the program group. To confirm the installation of the NCT-2000-XP application, please click on the button in the Windows operating system, and then select the in order.
NCT-2000-XP – Send Message The user can send a message to the connected PC Expanion or a specific PC Expanion. For more information, please see “9. How to send a message to the connected PC Expanion.” in Part 8. 1 Run the NCT-2000-XP application To confirm the installation of the NCT-2000-XP application, please click on the button in the Windows operating system, and then select the
Note The 'NCT-2000-XP Management Console' window appears when the is selected from the menu. After inputting the password, please click on the button. (If the 'Disable password protection' was selected during the installation of the application, the 'NCT-2000-XP Management Console' does not appear.> Session #01, #02, #03 … The programs and all the information, which are being used by the station that is currently connected, can be checked when the session is selected.
● Display Id : Shows the display device of the station which is Product Information connected. ● Hardware Id : Displays the virtual hardware of the station which is connected. ● Keyboard Id : Displays the information on the keyboard of the station which is connected. ● Pointer Id : Displays the information on the mouse of the station which is connected. Displays the information on the Version String, Build Date, Copyright, Technical Support and Home Page.
System Settings Displays the general information on the system. ● Delay until shutdown (seconds) : The shutdown time of each station when the host computer shuts down can be set. The range of the input value is from 1 second to 999 seconds. ● Disable Send Broadcast Message : Displays an option that can activate or deactivate the message sending mode for each station. ● Prevent access of the USB-storage devices to the attached terminal.
● Autologon on the Host Station : If the user name and password are set, the station can start without the Windows logon screen of the host computer when on. Serial Numbers 3 USB-Storage device Assignment(s) This menu enables the use of the USB device at each station by setting an option for the USB Device which is connected to the host computer. When the USB device is connected, the user can view the USB device which is connected to the corresponding port.
4 Hardware Settings (LAN/Local) The user can set the status of the connected PC Expanions and change the options. Device Information The status of the connection and the serial number. 1 UTMA/UTSA Devices Settings for the connected PC Expanions can be changed from the administration console. (“UTMA/UTSA Device” shows information about the PC Expanions connected to the network.) Select the PC Expanion of which the settings are to be changed and click “UTMA/UTSA Device Setup” to change the setting.
Network Settings Language The IP address of the PC Expanion, the status of setting the IP address, gateway, and a MAC address. Language setup Connection Password Settings The status of the password in the setup of the PC Expanion. Status of the connection between the PC Expanion and the host PC, the IP address of the host PC, the name of host PC, the user name, and the name of the station.
Advanced When the user clicks the button, the user sets the desired columns. When the user clicks the , the column moves up. When the user clicks the button, the column moves down. If the user selects the column and clicks the button, the column will not be displayed in the list of UTMA/UTSA Devices. Note Click the hardware setting (LAN/Local) in the NCT-2000-XP console menu. Green color icon : Connected to the host PC in the local network.
Connection Settings Setup Password and Language The user can set the IP address of the host PC, the user ID, the password, the option of “Enable Autologon Mode,” “Auto-connection” mode, “Automatic Application”, and the resolution and the refresh rate. For more information, please see Part 8. The user can enable or disable the “Do not use password” option or “Protect BIOS options with password.” Member of Groups The user can mange a group of selected PC Expanions.
Part 7 Using the “Setup” The PC Expanion allows users to set various settings such as IP settings, host computer to connect to, resolution, etc. Users can set the settings in PC Expanion as well as in the NCT-2000-XP console of a host computer as described in Part 6. This section describes procedures to configure the settings of the PC Expanion. The ‘Setup’ screen of PC Expanion supports English only. When the user turns on the PC Expanion, the startup screen appears.
Options or TS Options You can set the host computer to be connected to the PC Expanion and set the resolution and user name for the host computer. Select ‘Autodetection’, ‘TS 2’ or ‘TS 3’ in the ‘TS Options’ screen and click the button. It will then be displayed in the list on the PC Expanion initial screen. Select ‘Autodetection’ to search for host computers in which the NCT-2000-XP program is installed.
Password Misc This option allows a user to set a BIOS password for protection. If the user selects the “Protect BIOS options with password” option, the user can set the new password. This option is the function for end-users that want to use a touch screen or touch pad device. The option is currently only supported by the L2XX model series. If you want to calibrate the cursor of a touch screen or touch pad, click the button. And then click the cross in order.
Part 8 Using the PC Expanion (Advanced) 1. How to add a new user account User accounts personalize Windows for each person who shares a computer. You can choose your own account name, picture, and password, and choose other settings that will apply only to you. A user account gives you a personalized view of your own files, a list of favorite Web sites, and a list of recently visited Web pages.
Add a user account under Windows 2000 Professional 4 Enter your password and click the button. If no password is set, anyone can logon and view and change your personal information and settings. Be sure to set a password. 1 ▶ ▶ ▶ Double-click Note You can set a password for a user account or change the password of a password-protected account.
Note You can reconfigure groups for a user account. Double-click ▶ , select a user account and click the button to change the group in the user account. 2 Click “Create a new account” 3 Type a name for the new account. And then click the button. Add new user accounts under Windows XP operating system. 1 Double-click icon. 4 Select an account type and click the button.
Note The user can only create the administrator and the limited user account under Windows XP Home edition. However, the user can create new user account similar to the Windows 2000 operating system under Windows XP Professional. The following information is for the user to create a new user account under Windows XP Professional. and then doubleclick the user account that you want to create.
2. How to check the IP address setting on the PC Expanion 3 Click the button or of to check the IP address and the gateway of the PC Expanion. How to check the IP address on the PC Expanion. 1 Click the button or of button of startup screen of PC Expanion. How to check the IP address and the gateway in the NCT-2000-XP program 1 ▶ ▶ ▶ Select the
2 Select the corresponding PC Expanion and then double-click or click the 4 In order to apply the setting, click the or button. ‘Device Settings’ icon. You can confirm the current IP address and gateway address in the Network Settings field. To change the IP address, click the button. You must restart the PC Expanion in order to apply the setting. Please click the button. Note If the PC Expanion is currently being connected and used, a warning message appears.
3. How to check the IP address of the host PC. 3 Select ‘Internet Protocol(TCP/IP)’ and then click the button. How to check the IP address with Windows 2000 operating system. 1 ▶ ▶ ▶ Select ‘Local Area Connection’ and then double-click it. 4 To use an automatically allocated IP address, select ‘Obtain an IP address automatically.’ To use a static IP address, select ‘Use the following IP address.
How to check the IP address of the host PC under Windows XP operating system. 1 ▶ ▶ ▶ Select 3 Select ‘Internet Protocol (TCP/IP)’ and then click the button. ‘Local Area Connection’ and then double-click. 4 To use an automatically allocated IP address, select ‘Obtain an IP 2 Click the button. address automatically.’To use a static IP address, select ‘Use the following IP address.
Note The user can check the IP address of the host PC under DOS environment. ▶ ▶ ▶ or ▶ ▶ Type ‘cmd’ and then click the button. Then type ‘ipconfig’ command and click the key. You can see the IP address of the host PC. 4. How to connect between the PC Expanion and the host PC using network equipment. Connecting to the network using a cable or DSL router (DHCP function of more than 100Mbps with switching ) 1 Refer to ‘2.
4 Click the button. 5 When the Windows logon window appears, type the user name and the password. Connecting with a switch (Supports 100Mbps switching) 1 ‘Setup the IP address of the PC Expanion by referring to ‘2. Setting and Confirming the IP Address of PC Expanion’. If you are using a switch, you must set up the IP address manually because you cannot use an automatically allocated IP address. For the correct IP address and gateway address, ask your computer administrator.
3 Click the arrow in the PC Expanion initial screen and select a host computer from the list. If ‘Autodetection’ is selected in the ▶ of the PC Expanion, up to 8 host computers within the same sub-network of the NCT-2000XP application are automatically found and listed. Automatically found host computer names are marked by the ‘*’ symbol in front of them.
2 After referring to “3. How to check the IP address setting of the host 4 When the Windows logon window computer” in part 8, set the IP address of the host PC manually. appears, type the user ID and the password. Select the ‘Use the following IP address’ option. IP address column : Type “192.168.010.002” Subnet Mask : Type “255.255.255.0” Gateway : Type “192.168.010.001” 3 Click the ‘Connection to’ arrow in the PC Expanion initial screen and select a host computer from the list.
2 Click the button. 6. How to connect to the specific host PC 1 Click the button in the startup screen of the PC Expanion. 3 Select ‘Advanced’ tab. Check “Allow other network users to connect through this computer’s Internet connection” in the Internet Connecting Sharing window and click “OK” button. 2 Select the ‘TS Options’ tab, select ‘TS 2’ or ‘TS 3’ and click the button. Click the button and setup host computer information.
3 Enter the IP address of the host computer to connect to the Terminal Server network address field. For the IP address of a host computer, refer to ‘3. Setting and Confirming the IP Address of a Host Computer.’ If the IP address is incorrect, the host computer will not be connected. Click the button to save the settings and click the button to exit the settings. 4 Click the arrow in the PC Expanion’s initial screen and select a host computer from the list.
4 Input the IP address of the host PC in the “Terminal Server network address” column of the “Edit Connection Profile” window. Then click the button. 5 Click the button or the button in order to save the changed option. The user must restart the PC Expanion. Please click the button in order to restart the PC Expanion. Note If the PC Expanion is currently being connected and used, a warning message appears. If you click the button, the PC Expanion restarts.
7. How to connect to the specific host PC automatically How to configure the PC Expanion. 1 Click the button in the startup screen on the PC Expanion. 2 Select the ‘TS Options’ tab, select ‘TS 2’ or ‘TS 3’, click the button and click the button. To connect to a specified host computer automatically, there must be one host computer on the list of the PC Expanion initial screen.
2 Click the icon in the ‘UTMA/UTSA Setup view.’ 3 Select either ‘TS 2’ or ‘TS 3’ from the ‘Host Computer List to Connect to,’ click the button and then click the button. To connect to a specified host computer automatically, there must be one host computer in the list on the PC Expanion’s initial screen.
6 In order to save the changed option, the PC Expanion must be restarted. Click the button in order to restart the PC Expanion. 8. How to log in automatically when the PC Expanion connects to the host PC. 1 PC Expanion users can log in from the host PC. ▶ ▶ ▶ Select in order to run the NCT-2000-XP program. Go to ▶ Select and then select the specific PC Expanion. Then double-click it.
3 Select the host PC that is connected to the PC Expanion in the “UTMA/UTSAServer Connection list” and then click the button. 4 Select ‘Use auto logon’ in the ‘Connection Information Settings’ screen. Be sure to enter your ‘User Name’ and ‘Password’ and click the button. The Auto Logon function is only allowed on the NCT-2000-XP console because the password is saved in the user personal profile managed by the host computer and the PC Expanion cannot manage this information.
9. How to send a message to the connected PC Expanion There are two methods available to send a message. Send a message using “NCT-2000-XP-Send Message” option in the pop-up menu of NCT-2000-XP icon on the taskbar. 1 Move the mouse point to the NCT-2000-XP icon on the task bar of Windows. Then click the right mouse button. Select the ‘NCT-2000-XP – Send Message’ 2 A user can send a message from the PC Expanion to other PC Expanion or to other PC Expanion of different host PC.
10. How to start or stop running the NCT-2000-XP application After installing the NCT-2000-XP application, whenever the host PC is rebooted, the NCT-2000-XP program will run automatically. If the NCT2000-XP application is disabled, the PC Expanion cannot connect to the host PC. 3 When the host PC is rebooted, a window appears with the disabled NCT-2000-XP application. The window asks whether you would like to use the NCT-2000-XP program again or not.
11. How to terminate an active PC Expanion. 12. How to see the screen of a running PC Expanion The user can terminate the PC Expanion that is presently connected to the host PC. The user can see the screen of a PC Expanion that is connected to a host PC. 1 Go to ▶ ▶ ▶ ▶ ▶ ▶ . Go to ▶ Select and then select the PC Expanion that you want to terminate.
3 The station screen appears where the user can set the resolution and color depth on the PC Expanion. 13. How to control a running PC Expanion by the administrator The administrator can control a PC Expanion that is connected to the host PC remotely. 1 After referring to ‘12. How to see the screen of running PC Expanion’ in Part 8, run the “View station” option. 2 When the screen of the station displays, move the mouse point to the title bar of window. Then click the right mouse button.
14. How to log in to the host PC automatically The PC Expanion provides a mechanism for automatically logging on a host computer without entering a user name and password. 1 Go to ▶ ▶ ▶ . Go to ▶ ▶ Select and then double-click the ‘Autologon on the host Station’ on the right side of the window. 2 Check the “Enable Autologon Mode on Main Station‘ option.
2 Set the time. Then click button or button. The range of timing is from 1 until 999 seconds. 16. How to enable or disable the function of sending a message Please refer to ‘9. How to send a message to the connected PC Expanion’ in Part 8. 1 Go to ▶ Note When a host computer is shutdown or restarted, and if a PC Expanion user selects the button, the host computer will not be shutdown. A the message will appear saying that a station user canceled the shutdown.
17. How to view and control a PC Expanion Please refer to ’12. How to see the screen of a running PC Expanion’ and ’13. How to control the running of a PC Expanion by an administrator’ in Part 8 regarding the function of viewing the PC Expanion and controlling the PC Expanion remotely. 1 Go to ▶ ▶ ▶ .
2 Type a numeric character. The range is from 0 to 999 minutes. In order to stop a ‘connected’ PC Expanion automatically, set this value to ‘0’. When the period of time passes since PC Expanion enters ‘Disconnected’ status, the ‘Disconnected’ PC Expanion will be forcibly terminated. 19. How to run both NCT-2000-XP program and an application using Windows RDP Remote Desktop Protocol (RDP) is a multi-channel protocol that allows a user to connect to a computer running Microsoft Terminal Services.
20. How to view the background-bitmaps image of a PC Expanion When NCT-2000-XP program is installed on a host computer and you are using a PC Expanion to connect to the host computer, the background image appears only once when a connection has been established for the first time with the host computer. The background image appears only while you are creating a personal profile.
21. How to set the password of the NCT-2000XP program 22. How to use the USB port in case of L2XX model series Be sure to set your password to prevent anyone other than an administrator from changing the NCT-2000-XP console settings. You can set a password when you install the NCT-2000-XP application. To set a password when you install the program, enter a password in the ‘New Password” and ‘Confirm Password’ and click the button instead of selecting ‘Do not set administrator password.
23. How to change the name of a PC Expanion 3 In order to save the changed option, the PC Expanion must be restarted. Click the button in order to restart the PC Expanion. The name of a PC Expanion is displayed in the ‘Alias’ field of the “UTMA Info” window when the user clicks the button. The name of a PC Expanion can only be changed in the NCT-2000-XP console. 1 Go to ▶ ▶ ▶ .
24. How to run the specific program when the PC Expanion connects to the host PC You can set a PC Expanion so that it can run only one program. So, if a PC Expanion user exits the program, the user is automatically logged off and cannot use any other program than the one specified. 3 Select ‘Start following program’ Then type the file name in the ‘Program’ column. And type the folder name for the path to the executable file in the ‘Folder’ column.
5 When the Windows logon window appears, type the user ID and the password. Then click button. The application should now run automatically. If the set application is terminated, the PC Expanion is logged off automatically. How to set the NCT-2000-XP Console 2 Click the in the “UTMA/UTSA Device Overview” window. 3 Select the host PC that is connected to the PC Expanion in the “UTMA-/UTSA-Server Connection list”. Then click .
4 Select ‘Start following program’ Then type the execute file name in the ‘Program’ column. Type the folder for the execute file in the ‘Folder’ column. For example, if you would like to run ‘memo’ program automatically, type the following information; program: Notepad.exe, Folder: C:\Windows. Then click the button and button. Note If the user uses the specific PC Expanion, the following figure appears. Click the button and the PC Expanion will be restarted.
25. How to manage grouped PC Expanions under the NCT-2000-XP program The NCT-2000-XP console’s ‘Hardware Settings (LAN/Local)’ device list shows all PC Expanions that are currently connected to the network or were connected. A user can more efficiently manage PC Expanions by grouping them. Group PC Expanions according to the procedures below. 3 There are two ways to assign PC Expanions in a group. One is how to assign the PC Expanion in the “UTMA/UTSA Device Group(s).
How to assign a PC Expanion 3 Click the button. 1 Go to ▶ ▶ ▶ . Go to ▶ Select and then double-click the PC Expanion that you would like to change. 4 Select the group that you would like to group in “Available groups” and click the button. 2 Click the in the “UTMA/UTSA Device Overview”. 5 Click the button or the button.
26. How to manage when user forgets the password of the NCT-2000-XP program An administrator is responsible for setting the NCT-2000-XP console password. When you lose or forget an NCT-2000-XP console password, you can reset the password according to the procedures below. 1 Run the NCT-2000-XP program and input any password or character. 2 When the wrong password message appears, click the “OK” button. 3 When “Did you forget Your password?” message appears, click the button.
27. How to add or remove the serial number of NCT-2000-XP program The serial number of the current version of a PC Expanion is embedded in the product. To view a serial number, click the button on the PC Expanion’s initial screen. The serial number of a product manufactured before the year 2005 is not embedded. The serial number of a product manufactured before the year 2005 is printed on the label at the bottom of the product with an activation key.
3 If there is no a serial number on the list, the insert window with user’s 5 Select the file where the serial number is saved. information appears. If there is more than one serial number on the list, the serial number and the activation key input window appears. Type the serial number and the activation key. Then button. 4 You can add all serial numbers after making a file. Go to ▶ ▶ and then click the right mouse button.
How to delete the serial number 1 Go to ▶ ▶ ▶ . Go to ▶ Select the . 2 To delete a serial number, select the serial number to be deleted, right-click and select from the pop-up menu. If the serial number is in use, you cannot delete the number. You can figure out whether a serial number is in use or not by checking the number in the ‘Number of Stations’ field.
29. How to set the resolution and frequency on the PC Expanion You can set the resolution and frequency of the PC Expanion to be used when it is connected to a host computer in advance. The specified resolution and frequency overrules the resolution and frequency settings made when you initially set up the host computer. 3 Select the resolution and frequency in the ‘Desktop size’ field. Available resolutions are displayed depending on your product model.
2 Click the in the “UTMA/UTSA Device 4 Select the Desktop size and the Overview” window. frequency. Then click the button. 5 In order to save the changes, the PC Expanion must be restarted. Click the button in order to restart the PC Expanion 3 Select the host PC that is connected to the PC Expanion in the “UTMA-/UTSA-Server Connection list.” Then click button. Note If the user is currently using the specific PC Expanion, the following message appears.
6 Click the button. 30. How to set the user ID and the password before the PC Expanion logs in to the host PC If the PC Expanion is connected to a host computer, the Windows logon screen appears. You can preset your user name and password so that you can logon to Windows without entering them each time. To logon to Windows automatically, refer to ‘8. Auto Logon when PC Expanion is connected to a Host Computer.
3 Enter a user name in the ‘User name’ field. The user name allows alphabet letters only. You can enter a user name in a PC Expanion. You cannot enter a password in a PC Expanion. Since a password is private profile information, PC Expanion cannot save the information. Click the button to save the settings and click the button to finish the setting. 2 Click the in the “UTMA/UTSA Device Overview” window.
5 In order to save the changes, the PC Expanion must be restarted. Click the button in order to restart the PC Expanion. 31. How to uninstall the NCT-2000-XP program If you uninstall the NCT-2000-XP application, you cannot use the PC Expanion. 1 Please click on the button on the Windows logon screen and select in order. Note If the user is currently using the specific PC Expanion, the following figure will appear.
3 Click the button. 32. How to assign a USB storage device You can set a USB storage device connected to a host computer so that a specific PC Expanion can access it. The L200 model provides a USB port so that a USB device can be connected to it directly. A USB storage device directly connected to a L200 is not accessible by a user using another PC Expanion. Assign a USB storage device connected to a host computer to a PC Expanion according to the procedures below.
Part 9 Troubleshooting an error message Troubleshooting an error message that appears in the PC Expanion Reading flash data… While the PC Expanion is booting, the following message appears. If there is no DHCP server on the current network, click the button, select ‘Use Static IP address’ in the ‘Network’ and manually set the IP address. For the IP address and gateway address required for manual setting, ask your computer administrator. Static IP address was assigned.
No Terminal Server found or not all services initialized yet, please click on the connection list and try again When the PC Expanion is set to find the host PC automatically, “Autodetection” is set in . However the PC Expanion may not find the host PC where the NCT-2000-XP program is installed. ● Check Point : Check if the NCT-2000-XP program is installed on the host computer. Check if the LAN cable is properly connected to the host computer.
Connection was closed but data is not lost and application is still running at server side. Please connect terminal server later. This message appears when the connection stops due to problems or abnormality occurs in the host PC or network equipment. Check the Host PC or the network equipment when this message appears and restart after turning off the power the host PC and PC Expanion.
Appendix Glossary Regarding PC Expanion Regarding computer network Host Computer User account The computer which is connected to a PC Expanion, or a computer in which the NCT-2000-XP program has been installed. A user in a computing context is one who uses a computer system. Users may need to identify themselves for the purposes of accounting, security, logging and resource management.
Bandwidth DHCP (Dynamic Host Configuration Protocol) Bandwidth is often used as a synonym for data transfer rate - the amount of data that can be carried from one point to another in a given time period (usually a second). This kind of bandwidth is usually expressed in bits (of data) per second (bps). Occasionally, it's expressed as bytes per second (Bps).
Ethernet Internet Ethernet is the most widely-installed local area network (LAN) technology. Specified as IEEE 802.3. Internet, sometimes called simply "the Net," is a worldwide system of computer networks - a network of networks in which users at any one computer can, if they have permission, get information from any other computer (and sometimes talk directly to users at other computers).
Log on Router In general computer usage, logon is the procedure used to get access to an operating system or application, usually in a remote computer. Almost always a logon requires that the user has (1) a user ID and (2) a password. Often, the user ID must conform to a limited length such as eight characters and the password must contain at least one digit and not match a natural language word.
FAQ The following is a list of possible situations that may arise during the use of your product. Simple answers and solutions are provided for each : Q If NCT-2000-XP Installation CD is not available, can I download Q A message (shown below) repeatedly appears while installing A Yes, you can download the latest version of the program. However, NCT-2000-XP.
Q Why does the warning message below appear when I install NCT-2000-XP? A Windows XP Service Pack 2 provides reinforced firewall that displays a security warning message when a new port is used. The message also appears when you install another program such as Messenger. If you select in the message box, you will not be able to find NComputing servers even if you run the setup program again because the port is blocked.
Q How many PC Expanions can be connected to one host PC via the network equipment ? A Please refer to “Part 1. The features of the product.” Q Do I have to upgrade the NCT-2000-XP program? A No, you don’t need to upgrade the program if you do not have problems using it. However, since Microsoft is releasing security updates regularly, you may experience conflicts with new security updates. When a conflict with a security update is reported, a new version of the software will be distributed within a week.
Q Can the product support 10Mbps or 1Gbps? Q What games can I play? A No, PC Expanion supports 100Mbps. The product cannot run under A You can only run 2D games the Internet and casual games such as 10Mbps or 1Gbps properly. Q I can only move the mouse cursor but cannot do anything else while I am using the PC Expanion. The PC Expanion status in the NCT-2000-XP console appears to be running.
Rev. A Part No. 160-0155 You may also contact technical support at 1-888-365-1210 Monday ~ Friday between the hours of 9:00 AM ~ 5:00 PM PST to speak with a technical support representative.
