Edited with the trial version of Foxit Advanced PDF Editor To remove this notice, visit: www.foxitsoftware.
Edited with the trial version of Foxit Advanced PDF Editor To remove this notice, visit: www.foxitsoftware.com/shopping NCE Smart DTV warranty terms & conditions The warranty cover period are listed below: Items Warranty Period Warranty Type Remote controls 6 months Repair or Replacement Television console 1 years Parts/labour 1. NCE will provide parts and labor to you the Customer as set out here in. 2.
b. NCE and/or its Agents will decide if there are any defects in the material and/or workmanship. This warranty is only applicable for repairs on declared equipment carried out within Mainland Australia. 6. What is NOT covered by this warranty. a. Product performance or failure. i. of equipment due to the product being inadequately serviced to manufacturers recommendations. ii.
8. Neither NCE nor its representatives provide loan equipment under the terms of this warranty. 9. Any unauthorized access to the internal hardware of the product will void this warranty. 10. Replacement items are"Like for like"and is not "new for old"and does not indicate in any way that a faulty product will be replaced with a new part or unit. 11.
NCE Smart DTV warranty terms conditions 01 Power Supply Installation Use and Maintenance Important Safety Instructions Names of each part/Accessories Names of each part/Back View Remote control 05 06 07 08 10 11 12 TV Operation Select Input Source Initial Installation 14 15 Main Menu Operation 17 Picture Menu 21 Sound Menu 23 Bluetooth Time Menu Lock Menu 24 25 27 Hotel Mode 29 Setup Menu Screen Menu 30 34 Media Operation Media Operation Photo Menu Music Menu Movie Menu Text Menu 35 36 37
Power Supply 05
Installation 06
Use and Maintenance 07
Important Safety Instructions 08
Important Safety Instructions gently 09
Names of each part Front View 1. After you insert a disc in the disc tray, press the button to play, and press twice to pause. 2. Press the button when the power is on to eject the disc. Press the button again to re-load the disc. 3. VOL(+) - This button increases the TV’s volume. If the On Screen Display (OSD) menu is active, pressing this button will move the selection to the right. 4. VOL(-) - This button decreases the TV’s volume.
Names of each part HDMI2 USB mini YPbPr mini AV PCAudio RJ45 Network USB Back View DC IN EARPHONE COAX CVBS OUT L- VGA LINE OUT -R 11 HDMI1 RF IN
Remote Control Functions of remote control buttons The remote control uses Infra- Red (IR) technology. For best performance, point it directly at the front of the TV. The remote control may not work correctly if it is operated out of range or from an acute angle . POWER MUTE NICAM/A2 AUDIO # T.SHIFT DEL ANGLE LANG D.SETUP D.
Remote Control MUTE POWER NICAM/A2 AUDIO HOME: Return to the home page MOUSE: turning on/off the mouse in your browser and applications # T.SHIFT DEL ANGLE LANG D.SETUP D.MENU HOME MOUSE A-B:Repeats various sections of a playback A-B S.MENU REPEAT R.LIST S.
SELECT INPUT SOURCE Press INPUT button to display the input source list, Press ▼ / ▲ button to select the desired input source you want to, Press ENTER button to enter the input source, Press EXIT button to quit.
Initial Installation Connect a RF cable to the TV’s input called “RF-In”. Select Language Press ◄ / ► button to select the language to be used for menus and message. Select Country P ress / button to highlight country menu. Press ◄ / ► b utton to select. Press ENTER to continue. Ensure Country is set to Australia Select Tune Type Press ◄ / ► button to select Digital TV Tuning, Analogue TV Tuning or Both. Press ENTER to continue.
Auto Tuning ATV: Press MENU and then left arrow button to skip ATV tuning. DTV: Press MENU and then left arrow button to skip DTV tuning.
Main Menu Operation Channel Menu Press MENU button to display the main menu. Press ◄ / ► button to select CHANNEL. In DVT Source: 1. Press ▼ / ▲ button to select the option to adjust in the CHANNEL menu. 2. Press ENTER button to adjust. 3. After finishing your adjustment, Press ENTER button to save and return to the previous menu. Auto Tuning Press ▼ / ▲ button to select Auto Tuning, t hen press ENTER / ► button to enter.
ATV Manual Tuning Current CH Set the channel number. Color System Select the color system (Available System: AUTO,PAL , SECAM ) Sound System S elect the Sound system (Available System: DK, L, BG, I Fine-Tune Adjust the frequency of the channel. Search Start searching channel.
DVT Manual Tuning Press ▼ / ▲ button to select DTV Manual Tuning, then press ENTER button to enter sub-menu. Press ◄ / ► button to select channel, then press ENTER button to search program. Program Edit Press ▼ / ▲ b utton to select Program Edit, then press ENTER button to enter sub-menu. The three colored key is the shortcut for programming the channel. First press ▼ / ▲ to highlight the channel to select, then: Press the Red button to delete the program in the list.
Schedule List Press ▼ / ▲ button to select Schedule List, then press ENTER button to enter sub-menu. NOTE: If a program conflicts with a scheduled program, it will produce a warning message. Press the YELLOW button to enter the interface below. Press ▼ / ▲ button to select option. Press ▼ / ▲ to make and adjustment. Press ENTER to confirm. Signal Information Press ▼ / ▲ button to select Signal Information, press the ENTER button to see the detailed information about the signal.
Press MENU button to display the main menu. Press / button to select PICTURE in the main menu. 1. Press ▼ / ▲ button to select PICTURE menu. 2. Press Enter button to adjust. 3. After finishing your adjustment, Press MENU button to save and return back to the previous menu. Picture Mode Press ▼ / ▲ button to select Picture Mode, then press Enter button to enter sub-menu. Personal Mode You can change the value of contrast, brightness, color, sharpness and tint.
Colour Temp Change the overall color cast of the picture. Press ▼ / ▲ button to select Colour Temperature, then press Enter button to enter Sub-Menu. Press ▼ / ▲ button to select. Press Enter button to confirm. Cold Normal Warm Increase the blue tone. No change in tone. Increase the red tone. Noise Reduction To filter out and reduce the image noise and improve picture quality. Press ▼ / ▲ button to select Noise Reduction. Then press Enter button to enter sub-menu.
es MENU utt es utt s la a elec SOUND e u a e u ess utt t adjust t e SOUND e u ess Enter utt t adjust A te s adjust e t P ess Enter utt t sa e a d etu t t e e Sound Mode es utt elec u t e es Enter utt te u ess utt elect Back Select alu T S a S e s Note t e l e t u e s o directly c a t duce ala ce u l ese e a u d a ce e l as c a ce cal ts elec ust ctu ett s a as B alance es utt Auto Volume level es utt SPDIF Mode es utt AD Switch es utt l elec User a la l t elec Aut de e u utt
Bluetooth 1. Use the buttons to activate Bluetooth. 2. Make sure your Bluetooth device(such as Bluetooth headset) is ready for use. 3. Use the buttons to switch to "Bluetooth Pair" and confirm with Enter. 4. The following window will now search for compatible Bluetooth devices (this may take 1-2 minutes). 5. After successful search, select the device that you want to connect. 6. After successful connection, the audio signals from the TV are now transmitted to the Bluetooth device.
Press MENU button to display the main menu. Press ◄ / ► button to select TIME in the main menu. 1. Press ▼ / ▲ button to adjust in the TIME menu. 2. Press ENTER button to adjust. 3. After finishing adjustment, Press ENTER button to save and return to the previous menu. Time Zone Press ▼ / ▲ button to select Time Zone, then press ENTER button to enter sub-menu. Press ▼ / ▲ / ◄ / ► button to select time zone. Sleep Timer Press ▼ / ▲ button to select Sleep Timer, then press ENTER button to enter sub-menu.
Auto Standby Press ▼ / ▲ button to select Auto Standby, then press Enter button to enter sub-menu. Press ▼ / ▲ button to select. Tips: Using the remote control resets the timer. OSD Timer Press ▼ / ▲ button to select OSD Menu Time-Out, then press Enter button to enter sub-menu. Pres s ▼ / ▲ b utton to select.
Press MENU button to display the main menu. Press ◄ / ► button to select Lock in the main menu. 1. Press button to adjust the LOCK menu. 2. Press E n t e r / ◄ / ► button to adjust. 3. After finishing your adjustment, Press M E N U button to return back to the previous menu. System Lock Press button to select System Lock. then press Enter button. Default password is 0000. If forgotten, please call the service centre.
Channel Lock Press button to select Channel Lock, then press Enter button to enter sub-menu to select. Press Green button to lock or unlock the channel. Parental Guidance Press button to select Parental Guidance, t hen press Enter button to enter sub-menu to select the appropriate rating. Key Lock Press button to select Key Lock, then press ◄ / ► button to select Off or On. When Key Lock is on, you can’t use the Key panel buttons on the back of the TV.
Hotel Mode With Hotel Mode ON, settings cannot be adjusted 1. Press button on the remote control to select hotel mode in the Lock menu. 2. Press Enter button on the remote control to enter the sub-menu. 3. After finishing your adjustment, Press MENU button to save and return back to the previous menu. Hotel Mode Press button to select Hotel Mode, then press ◄ / ► button to select on or off. Source Lock Press button to select Source Lock, then press Enter button to enter sub-menu to select.
Press MENU button to display the main menu. Press ◄ / ► button to select SETUP in the main menu. 1. Press ▼ / ▲ button to adjust the SETUP menu. 2. Press Enter button to adjust. 3. After finishing adjustment, p ress Enter button to save and return to the previous menu. Language Select an OSD menu language to be displayed. English is selected as default menu language. Press ▼ / ▲ / ◄ / ► button to select Menu Language.
Audio Languages Press ▼ / ▲ button to select Audio Languages, then press Enter button to enter sub-menu. Press ◄ / ► button to select the primary or secondary audio language. Press ▼ / ▲ / ◄ / ► button to select the Audio Languages. Subtitle Language Press ▼ / ▲ button to select Subtitle Language, then press Enter button to enter sub-menu. Press ◄ / ► button to select the primary or secondary subtitle language. Press ▼ / ▲ / ◄ / ► button to select the Subtitle Language.
Aspect Ratio Press ▼ / ▲ b utton to select Aspect Ratio, then press Enter button to enter sub-menu. Press ▼ / ▲ b utton to select aspect ratio. (Available options are: Auto, 4:3,16:9, Zoom1, Zoom2). Blue Screen Press ▼ / ▲ button to select Blue Screen, then press Enter button to select On or Off. First Time Installation Press ▼ / ▲ button to select Initial Installation, t hen press Enter button to enter. Reset Press ▼ / ▲ button to select Reset, then press Enter button to enter sub-menu.
EPG Press EPG button on remote control to enter EPG menu page. Press UP/DOWN navigation button to select preferred program. Press LEFT/RIGHT navigation button to switch between left column and right column. When a program is highlighted (cursor moved to right column): Press RED button to record program. Press GREEN button repeatedly to set a reminder. Press YELLOW button to display program guide of previous day. Press BLUE button to display program guide of next day.
Press MENU button to display the main menu. Press ◄ / ► button to select SCREEN in the main menu. 1. Press ▼ / ▲ button to adjust the SCREEN menu. 2. Press Enter button to adjust. 3. After finishing your adjustment, Press Enter button to save and return to the previous menu. Auto Adjust Press Enter button to start adjusting automatic H-Offset/V-Offset/Size/Phase. H-Offset Adjust the horizontal position of the picture. Press ▼ / ▲ button to select H-Offset, t hen press Enter button to enter sub-menu.
Media OPERATION Note: Before operating Media menu, Plug in USB device, then press SOURCE button. Press ▼ / ▲ button to select Media in the Source menu, then press Enter button to enter. Press ◄ / ► button to select the type of media you wish to view in the Media menu, then press Enter button to enter. Press ◄ / ► button to select C, then press Enter button to view the contents of the USB device.
Photo Menu Press ◄ / ► button to select PHOTO in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu. Press ◄ / ► button to select the desired file to watch in the file selecting menu, then press Enter to display the picture. When highlighting a photo, the file information will appear on the right and the picture will be previewed in the center.
Music Menu Press ◄ / ► button to select MUSIC in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu. Press ◄ / ► button to select drive disk you want to watch, then press Enter button to enter. Press ◄ / ► button to select return option to the previous menu.
Movie Menu Press ◄ / ► button to select MOVIE in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu. Press ◄ / ► button to select desired drive disk, then press Enter button to enter. Press Enter button to play the selected movie. Press Display button to open the menu. Press ◄ / ► button to select a function, then press Enter button to enter. Press Exit button to return to the previous menu.
Text Menu Press ◄ / ► button to select TEXT in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu. Press ◄ / ► button to select drive disk, then press Enter button to enter. Press ◄ / ► button to select return option to change pages. Press Display button to open the menu. Press ◄ / ► button to select a function, then press Enter button to enter.
Auto Tuning Install Wizard ATV: Press MENU and then left arrow button to skip ATV tuning. DTV: Press MENU and then left arrow button to skip DTV tuning. WELCOME PAGE When the TV is first powered up, the Welcome Page will be shown. Press▼ / ▲ buttons to select. Press Enter button to confirm. Press Enter to continue. +Reminder To skip this wizard, press “HOME” key. Once this guide is used, it will not auto-open again. 1.7.
Install Wizard Initial Installation Connect a RF cable to the TV’s input called “RF-In”. Select Wireless Network (Wi-Fi) Select Language +Reminder Press ◄ / ► button to select the language to be used for menus and message. If you choose ‘Wi-FI’, select a Wi-Fi Select Country Select Ethernet country network(LAN) P ress / button to highlight menu. Press ◄ / ► b utton to select. Press ENTER to continue. Access Point 1.11.
Auto Tuning Install Wizard ATV: Press MENU and then left arrow button to skip ATV tuning. DTV: Press MENU and then left arrow button to skip DTV tuning. Setup page S etup Date/Time manually 1.14. Configuration Adjust screen size, using the arrow buttons on remote control. When you are finished, press Exit button.
Main Launcher Initial Installation Main Launcher Connect a RFthe cable to the TV’s input called to “RF-In”. Press arrow buttons select the icon and press “enter” to enter the sub-screen. Select Language Press ◄ / ► button to select the language to be used for menus and message. 1.16. Select Country P ress / button to highlight country menu. Press ◄ / ► b utton to select. Press ENTER to continue.
Main Launcher FUNCTION DESCRIPTION Add your favorite APPS to this directory. Add your media players to their directory. The Settings screen contains most of the customizing and configuration options, such as language, aspect ratio and network settings. Create APP shortcuts on the main launcher.
Main Launcher SETTINGS Connect a Select Language RFbutton cable to TV’sthe input called “RF-In”. Press ◄Network /► tothe select language to be used for menus and message. Select Country P ress / button to highlight country menu. Press ◄ / ► b utton to select. Press ENTER to continue. Settings Generation introduction Select Tune Type Tuning, Analogue TV Tuning or Both. Press ◄ / ► button to select Digital Turn TV on/off Wi-Fi Wi-Fi settings Press ENTER to continue.
Main Launcher Display Settings Generation introduction Automatically selects the best resolution of the HDMI output. Set the screen display range. Set the screen saver time.
Main Launcher onnec Select Language Advanced Press ◄ / ► button to select the language to be used for menus and message. C t a RF cable to the TV’s input called “RF-In”. Select Country P ress / button to highlight country menu. Press ◄ / ► b utton to select. Press ENTER to continue. Settings Generation introduction Set country Select Tune Type Set state Tuning, Press ◄ / ► button to select Digital TV Set cityAnalogue TV Tuning or Both. Press ENTER to continue.
Main Launcher onnec SETTINGS 1.21. Other Settings Generation introduction Restore factory default (Apps will be last). Update system via update.zip from USB flash drive. Enter advanced settings menu.
Main Launcher Connect a How to install new APPs 1.22. Select Language Install USBtheFlash Drive Press ◄ / ► buttonfrom to select language to be used for menus and message. Select Country 1. Open the "File Browser". P ress / button to highlight menu. 2. Choose yourcountry USB flash drive or any other mass storage’s folder. Press ◄ / ► b utton to select. Press ENTER to 3. Find your application, andcontinue. press Enter. Select Install. 5. You can find the application in “ALL Apps” after installation. 4.
Main Launcher ATV tuning. p DTV tuning . HOW TO DELETE AN APP 1.22. Remove Applications 1. Enter " Mo r e Set t i n g s " 2. Enter " A PPs" 3. Find the application you want to remove under the “All” tab 4. Press Enter, then select Uninstall 5.
Main Launcher Browser ATV tuning. . Initial Installation 1.23. Connect a RF cable to the TV’s input called “RF-In”. Select Language Press ◄ / ► button to select the language to be used for menus and message. Select Country P ress / button to highlight country menu. Press ◄ / ► b utton to select. Press ENTER to continue.
DVD Auto Tuning ATV: Press MENU and then left arrow button to skip ATV tuning. DTV: Press MENU and then left arrow button to skip DTV tuning. is accessed by pressing the D.Setup button. Press to navigate the OSD Menu. Press Enter to confirm the change. Press D.Setup to leave the OSD Menu. Pan & Scan (4:3) The sides of the screen will be black. Normal viewing mode. When you stop the disc, the player will automatically remember the point it finished playing.
Initial Installation Connect a RF cable to the TV’s input called “RF-In”. Select Language Press ◄ / ► button to select the language to be used for menus and message. Select Country P ress / button to highlight country menu. S , Press ◄ / ► b utton to select. Press ENTER to continue. You can also select alternative subtitle languages by pressing the S.Title button on remote. , based on the rating of the disc. This function is pasword protected.
Model Number Description TV System Mode NCE24SMTCOMBBT NCE28LEDSMTCOMB DVB-T/PAL DVB-T/PAL 23.
Edited with the trial version of Foxit Advanced PDF Editor To remove this notice, visit: www.foxitsoftware.com/shopping P/N:4.16.
