User's Manual

NBS Payment Solutions 6/8 User Manual

NBS7250 installation manual

Safety instructions lithium battery :

NBS7250 equipment is equipped with a lithium battery which is non-accessible for the user. Only a qualified operator is

authorized to open the unit and to replace this component.

Keypad Inserting, sliding or presenting

the cards

Installing the Shield (option)

UP Arrow key

Down Arrow key

Function Key

Cancel Key

Delete Key

Enter Key

Physical characteristics : Weight (without cable) 240g

Dimensions 165 x 95 max x 45mm (LxWxH)

Removable cable

Operating conditions

: Temperature +5°C to +45°C

Maximum relative humidity 85% RH to +55°C

Storage conditions

: Temperature -20°C to +55°C

Maximum relative humidity 85% RH à +55°C

Consumption

: 180mA @ +12V

280 mA @ +8V

350 mA @ +5V

Fixing of the base :

Maintain

the product on its base :

The base can be fixed by

three screws.

Two choices are possible, the

holes (A) or (b) indicated on

the drawing opposite.

The base can be used as

gauges of pointing on the

holes of the screws and for

the openings of connectors.

NBS7250 is maintained by a notch situated on its front side

and two clips on the back side. In order to install it on its

base, first introduce the front side of the equipment and

then, make a press on its back side until hearing the locking

noise . In order to remove it from the base, remove the two

clips one after the other while pulling up the equipment