User's Manual

NBS Payment Solutions 4/15 User Manual
1 SAFETY INSTRUCTIONS
In accordance with legal safety requirements, any person working on the NBS1200 is
required to have read and to comply with the following safety instructions:
A - Connection to the electrical power system
This section does not concern NBS1200 devices connected via a USB port (in this
case the NBS1200 is powered via the USB connection and not via the mains supply).
You should provide a socket for the incoming power supply complying with the
following points:
• Socket installed near the equipment and easy to access;
• Socket meeting the standards and regulations in force; the NBS1200 may
be connected to an electrical power system with the IT neutral system
(ground impedance according to EN 60950).
B - To turn off your NBS1200 peripheral
• If it is powered by an adapter via an RS232 cable, disconnect the adapter
from the electrical power system.
• If it is self-powered via a USB cable, disconnect the USB cable.
C - Secondary reader access cover (SAMs) The SAM access cover, located at the
back of the terminal (see section "SAM installation/removal", must be in place during
the device's normal use.
2 UNPACKING PRODUCT PACKAGE
Keep the NBS1200 packaging.
It should be reused for any transportation.
The NBS1200 package contains:
• The NBS1200 peripheral,
• Installation instructions,
• If necessary, a disconnectable power adapter depending on the model
supplied.
(The power adapter supplied has been specifically designed for the
NBS1200. Do not use any other unit.)
(Using a power adapter having apparently identical voltage/current characteristics
can still damage the terminal).