User Manual

To m ake the uni t ready for use, un screw the sc rew plug of th e battery c ompar tment on the
back of the transmitter and remove the cover. Insert 2 AA-Mignon-R6 batteries 1,2V into
thebattery compartment,close the cover and tighten the screw plug again.
3. TRANSMITTER
Planar-H, -S, -V
The functions of the receiver are released with the “ON/HORN” key.
The receiver has tobe switched off with the "STOP" key when work isfinished.
In the Planar display a red point flashes when commands are put in.
Energy saving function: The transmitter switches off automatically, if no keys are pres-
sed. The redpoint stops shining.
Optional: Transmitter for continuous operationpossible.
When the letter "L" lights up in thePlanar display, the batteries are nearly empty.
The transmitter can be operated for approximately 15 minutes more in this condition. Du-
ring this time, bring the unit to be controlled to a safe position and install 2 charged AA-
Mignon-R6 batteries1,2V.
STOP
L.
Planar-H
STOP
Input of commands:
The red point flashes.
8
Batteries are
nearly empty.
L
STOP
L.
Planar-V Planar-S
L.
ON/HORN
STOP
ON/HORN ON/HORN
STOP
STOP
Page 3