User's Manual

98
NBB Controls +
Components
GmbH
Transmitter PocketEvo
®
> Channel number
During operation the set channel can be displayed by pressing the “Frequency switching” key.
For transmitters without an LED display, the information is displayed in the monochrome.
> Battery life warnings
The quick blinking of the letters “Lo” in the display shows the end of the battery capacity. From this time
the operation of the transmitter is approx. 15 minutes possible, depending on battery type or batterypack.
During this time, bring the unit into a safe position, switch off the transmitter and replace the batteries
with charged batteries. For transmitters without an LED display, the information is displayed in the
monochrome.
> Energy saving function
If no buttons are pressed within a specified time*, the transmitter switches off automatically. The display
turns off. A transmitter can also be manufactured without a standby function for continuous operation
as an option.
*The standby time can be set as desired.
Please refer to the technical documents for the exact position of the “On/Horn”
and “Frequency switching” buttons.