User's Manual

NBB Controls +

Components

GmbH

Transmitter PocketEvo

Commissioning

> Operating voltage 2.4 V / 3,0 V

Loosen the retaining screw of the battery compartment on the back site of the transmitter and remove

the cover. Insert 2 fully charged AA 1.2 V NiMH batteries (or 1.5 V batteries) in the battery compartment,

close cover and tighten retaining screw.

If the NBB radio control system won’t be used for a long period of time, it is strongly recommended

remove the battery from transmitter and charge the battery approx. every 4 weeks. This prevents

deep discharge of the battery and enhances its service life.

Safety equipment

> Safety equipment in the NBB radio control system

– EMERGENCY STOP or STOP function

– Zero position interlock

Please check the sleeves and the housing for breaks and cracks each time before commissioning the

transmitter. Contact your service team if necessary. Non-observance can cause malfunctions and water

damage.

1. Loosen the retaining screw

Charge the rechargeable battery completely before initial use.

Please refer to the technical documents for the exact design.

2. Remove the cover