User's Manual

S
TA
R
T
S
T
OP
Transmitter with Emergency-Stop switch
As a confirmation the horn will be activated briefly two times in a row.
As a confirmation the horn will be activated briefly one time long continuous.
The power supply to the transmitter is activated with the “STOP” key, resp.
EMERGENCY STOP switch. (When pressed, the EMERGENCY STOP switch can
also be secured by removing the key cap. EMERGENCY STOP key No. 19 ).
A red dot flashes on the Planar- NL / Nano-L display during operation.
Commands can now be put in by means of the controls.
To turn off the transmitter push the “EMERGENCY STOP” switch.
S
T
A
RT
S
T
A
RT
ST
O
P
Transmitter with Piezo button
As a confirmation the horn will be activated briefly two times in a row.
As a confirmation the horn will be activated briefly one time long continuous.
The power supply to the transmitter is activated with the “STOP” key and the ON/HORN
key. The order you push the keys doesn´t make any difference. After you push the first
key, you have 5 seconds to push the second key.
A red dot flashes on the Planar- NL / Nano-L display during operation.
Commands can now be put in by means of the controls.
To turn off the transmitter push the “STOP” key.
Option: Turn the switch on the side to position: ON
When the letter "L" flashes quickly on the Nano-L display, the battery are nearly empty.
The transmitter can be operated for approximately 30 minutes more in this condition.
During this time, bring the unit to a safe position, switch off the transmitter and install a
charged battery.
Energy saving function: The transmitter switches off automatically, if the keys are not
pressed within a specified time. The red dot goes out.
Optional: Transmitter for continuous operation possible.
*The duration of this stand-by can be specified when ordering.
.
.
.
.
Operation:
The red dot flashes.
Quickly flashing:
Batteries are nearly
empty. Transmitter can
be operated for appr.
30 minutes more.