User Manual

..
3. TRANSMITTER HyPro
STOP
START
AKKU LEER
DISPLAY FUNK ON
DISPLAY AKKU
The power supply to the transmitter is activated with the “STOP” key, resp.
EMERGENCY STOP switch.
(When pressed, the EMERGENCY STOP switch can also be secured by removing the
key cap.)
The green LED on the transmitter control panel must flash regularly.
Commands can now be put in by means of the controls.
When the red "Battery" indicator lamp lights up, the batteries (rechargeable or not
rechargeable) are nearly empty.
The transmitter can be operated for approximately 30 minutes more in this condition.
During this time, bring the unit to a safe position, switch off the transmitter and install
2 charged AA Mignon batteries 1,2V NiMH (or batteries 1,5V - not rechargeable).
The transmitter switches off automatically, if the keys are not pres-
sed within a specified time. The LED goes out.
Optional: Transmitter for continuous operation possible.
Energy saving function:
*The duration of this stand-by can be specified when ordering.
Operation:
The red dot flashes.
Quickly flashing: Bat-
teries are nearly empty.
T
ransmitter can be
operated for appr. 30
minutes more.
Page 2