User's Manual

Checking the LED's at the receiver Compact-V:
LED 1 green: POWER ON. If LED fails to come on, check the power supply.
If the power lead is OK, call in the after-sales service.
LED 2 yellow: HF PRESENT. Steady light when transmitter is switched on
(insignificant for scanner operation).
LED 3 green: Flashes evenly during fault-free operation.
LED 4 red:
Irregular flashing means that the HF channel is probably at
fault - please set another channel.
If this LED flashes, the HF channel is at fault (not in the
scanner operation).
Steady light notifies the operator that an output function is
critical due to over current.
Checking the LED's at the receiver PNN-BUS-3:
%LED1: POWER ON. If LED fails to come on, check the power supply.
If the power lead is OK, call in the after-sales service.
%LED2: HF PRESENT. Steady light when transmitter is switched on
(insignificant for scanner operation).
%LED3: Flashes evenly during fault-free operation.
Irregular flashing means that the HF channel is probably at fault -
please set another channel.
%LED4: If this LED comes on, the HF channel is at fault.
%LED5: Charge condition display of battery (only present when charger is
integrated). Steady light when charging a battery.
LED flashes: The battery is charged, the charging process is finished.
®
MADE IN GERMANY
3.820.1008
®
ZULASSUNG - TYPE APPROVAL - AGREMENT - HOMOLOGATION
I
SYSTEM
NON EU COUNTRIES:
AUS
CDN
CH
CZ
H
IS
KO
N
EU COUNTRIES:
X0560
no approval necessary
2634 231 116A /
2634 231 116
BAKOM 95.0720.K.P
45251983
MÜ-40.039-083/96
IS-3236-00
93335
NO96000433-R /
NO95000545-R
1027/96
YK33-9806
K9VPOC90 T001 /
K9VPNN3-5R001 /
O5RS-DE96AO
3K43D/3R1B9/
SPLS/RX-439/98
PL
TJY
USA
ZA
1
2
3
4
5
Receiver Type / Version:
Factory No.:
Frequency:
PNN-BUS-3
999 899 4990
400 -477 MHz
X
1
2
www. nbb.de
®
COMPACT-V
X
3.820.1195
LEDS
SERVICE PLUG