User's Manual

3. TRANSMITTER HyPro
BATTERY /
ACCUMULATOR
Battery status is shown in the LC-display.
Figure 2 shows the low battery status.
The transmitter can be operated for approximately 30 minutes more in this condition.
During this time, bring the unit to a safe position, switch off the transmitter and install
2 charged AA NiMH or Alkaline cells.
Energy saving function: The transmitter switches off automatically, if the keys are not
pressed within a specified time.
Optional: Transmitter for continuous operation possible.
*The duration of this stand-by can be specified when ordering.
1 2 3 4 5
EM-STOP
START
DISPLAY RADIO ON
DISPLAY BATTERY
The power supply of the transmitter is activated with the EMERGENCY STOP switch.
When pressed, the EMERGENCY STOP switch can also be secured by removing the
key cap.
OPERATION will be shown in the LC-display.
Commands can now be put in by means of the controls.
State of
charge
An antenna symbol is active in the display during operation.