User's Manual
Page 6
6. FUNCTION CHECK
To maintain operational safety, a regular function check of the NBB radio remote control is
necessary. In single-shift day-to-day operation, we recommend performing this check at
least once a week. Checking is possible using the display lights provided on the receiver.
To do so, the transmitter must be set to the ready-to-operate state.
First connect just the receiver - the transmitter remains switched off.
Activate the transmitter by pressing the key "START/ON/HORN" at the Planar
transmitter.
Now check the commands (always start with the lowest stage) and check for
correct reaction oftheunittobecontrolled.
Ensure in particular that there is nobody in the danger area.
.PresstheSTOPkeyatthetransmitter.Thenobserveiftheunittobe
controlled is switched off (time to switch off according to the application).
(Optional with integrated charger)
RADIO PRESENT.
If the LED fails to come on:
1. Check that the transmitter is on.
2. Check the power supply of the receiver.
3. (Optional) Irregular flashing of the LED:
Check or change the current radio channel.
(Without charger)
RADIO PRESENT.
If the LED fails to come on:
1. Check that the transmitter is on.
2. Check the power supply of the receiver.
3. (Optional) Irregular flashing of the LED:
Check or change the current radio channel.
POWER ON. If LED fails to come on, check the power supply.
If the power lead is OK, call in the after-sales service.
HF PRESENT. Steady light when transmitter is switched on
(insignificant for scanner operation).
Flashes evenly during fault-free operation.
Irregular flashing means that the HF channel is probably at
fault - please set another channel.
If this LED flashes, the HF channel is at fault (not for scanner
operation).
Steady light notifies the operator that an output function
is critical due to high current.
%
%
%
%
%
%
%
%
%
ACCIDENT RISK!
STOP check
Checking the LED at the receiver R-16 and R-CAN:
The Green LED flashes:
Checking the LED at the receiver Compact-M:
The Green LED flashes:
Checking the LED's at the receiver Compact-V:
LED 1 green:
LED 2 yellow:
LED 3 green:
LED 4 red:
Service plug: For NBB service only.
COMPACT-M
R-16
R-CAN
1 2 3 4
www.n bb.de
®
COMPACT-V
X
3.820.1195
LEDS
SERVICE PLUG
LED RADIO ON SERVICE PLUG
LED RADIO ON SERVICE PLUG