IMPORTANT NOTES INTRODUCTION z Thank you for buying our product. z Please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference. WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To avoid electrical shock, do not open the cabinet; refer servicing to qualified personnel only.
2
NAMES OF CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32.
CAUTION z Remove batteries if they are exhausted or long time use. z Batteries contain chemical substances, so they should be disposed of properly. BASIC FUNCTION SWITCHING ON THE UNIT Set the FUNCTION switch to CD/AUX or RADIO. The power indicator illuminates. TO ADJUST VOLUME Rotate the VOLUME CONTROL clockwise or anticlockwise to increase or decrease volume. USING THE RADIO TUNING IN RADIO STATIONS 1. 2. 3. 4. 5. Move the FUNCTION switch to RADIO position.
RECORDING FROM THE RADIO 1. Load a blank tape into the tape compartment and close the door. 2. Set the FUNCTION switch to RADIO; Tune to required station by rotating the TUNING KNOB. 3. Press RECORD key to begin recording. RECORD key and PLAY key go down simultaneously. 4. Press STOP/EJ. Key to end recording. 5. To hear what you recorded, follow instructions in PLAYING A CASSETTE TAPE. NOTE: PAUSE FOR A MOMENT - Using the PAUSE key on the cassette deck instead of the STOP/EJ.
CARE OF CASSETTE MECHANISM Gently clean the tape head and pinch wheel/capstan assemblies after every 10 hours of using the unit. A range of cassette care products are available. The erase head and record/play head and the surface of the pinch roller are delicate and must not be touched with metal objects such as screwdrivers. You may find it easier to clean the assembly by pressing the PLAY button to bright head and pinch roller into view. Be sure to press the STOP button after cleaning the mechanism.
SELECTING A DESIRED TRACK/PASSAGE To select a desired track z Press CD SKIP/SEARCH FORWARD (NEXT)/BACKWARD button repeatedly in stop mode or during playing until the desired track appears on the display. z Press CD PLAY/PAUSE button to start play. To search for a particular passage during playback (track scanning at high speed) Press and hold CD SKIP/SEARCH BACKWARD/FORWARD button to scan the current playing track at high speed until desired point (passage), then release the button.
SPECIFICATIONS GENERAL Power Requirement Power consumption Weight Dimensions Operation temperature RECEIVER SECTION Receiving Bands Tuning Range COMPACT DISC SECTION Optical Pickup Frequency Response CASSETTE SECTION AC 127V ~ 60Hz DC 9V U M-1 x 6 PC S AC 15 Watts Approx. 2.2 kg Approx.
