Installation Guide

12
Chevrolet Tahoe 2012-2014
Installation Instructions
STEP 6
Plug in main interface (Part # NAVTOOL6.0-AR2-HDMI) into the universal wiring harness
(Part # NT-WHNT6). See quick connection guide on page 7.
Factory Radio Harness
(Not Used)
(Not Used)
Left Audio Output
Right Audio Output
Left Camera Input/ Video Input 3
Right Camera Input/ Video Input 4
Front Camera Input/ Video Input 2
Rear Camera Input/ Video Input 1
Click
AUX Input depends on the type of jack
installed in your car from the factory
Or
(Not Used)
NavTool Interface
(Part # NAVTOOL6.0-AR2-HDMI)
NavTool Interface Harness
(Part # NT-WHNT6)
Vehicle Specic
Plug and Play Harness
(Part # NT-GMQUAD1)
Back View of Car Navigation
• The product installation is now complete.
• Do not reassemble the vehicle until testing is fully complete. Only after you have tested that
everything is working can you reassemble the car.
• If you are adding side or front cameras, install them and plug them into the appropriate camera
RCAs.
• If you are installing any HDMI or streaming devices, connect it to the HDMI port of the NavTool.