Tourer ₆₉₅ LM Hardware User Manual
Important safety information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Home charger-specific safety information To charge your Navman from the mains power, use the home charger supplied by Navman as an accessory (may be sold separately). Using other home chargers with your Navman could result in serious injury or property damage. Never use the charger if the plug or cord is damaged. Do not expose the charger to moisture or water. Do not use the charger in a high moisture environment. Exposure to water may cause electrical sparks or fires.
Compliance WARNING! This product, its packaging and its components contain chemicals known to the State of California to cause cancer, birth defects or reproductive harm. This Notice is being provided in accordance with California’s Proposition 65. For regulatory identification purposes: Navman Tourer 695 LM Series is assigned a model number of N275. Marking labels located on the exterior of your Navman indicate the regulations that your model complies with.
Contents Important safety information ....................................................................................................... 2 Home charger-specific safety information............................................................................ 3 Internal battery-specific safety information......................................................................... 3 Compliance ......................................................................................................................
Welcome Thank you for purchasing this Navman. Please read this manual carefully before using your Navman for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual.
Mounting your Navman in a vehicle CAUTION! Never mount your Navman where the driver’s field of vision is blocked. If the windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In this instance, please mount your Navman where there is a “clear area” - usually just beneath the rear-view mirror. To protect your Navman against sudden surges in current, connect the in-car charger only after the car engine has been started.
Getting to know your Navman Item Description Power switch Cradle slot Speaker Connector for in-car charger, USB cable (sold separately), home charger (may be sold separately) and TMC accessory kit (may be sold separately) Touch screen Capture button Main Menu button 8
How do I turn on my Navman? Using the power switch To turn on your Navman, slide the power switch to the ON position. To turn off your Navman, slide the power switch to the OFF position, then tap Sleep. Your Navman will enter a suspended state. When you next turn it on, your Navman will return to the last screen that you used. To lock the screen, slide the power switch to the OFF position, then tap Lock. To unlock the screen, slide the power switch to the ON position.
How do I charge the battery? Your Navman has an internal battery that when fully charged, should provide power for up to 2 hours. The battery can take up to 4 hours to fully charge. The battery may not be fully charged when you use your Navman for the first time. CAUTION! For optimal performance of the battery, note the following: Do not charge the battery when the temperature is high (e.g. in direct sunlight). There is no need to fully discharge the battery before charging.
How do I connect my Navman to my computer? 1. Turn on your computer. 2. Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub) and plug on the bottom of your Navman. the small end into 3. When your Navman is turned on and connected to the computer, you can select the desired connection type from the pop-up message screen: 4. Charge only: You will be able to continue using your Navman with the battery in charging mode via the computer.
Reference What is GPS? The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Navman, to determine an exact location.
Never clean your Navman when it is turned on. Use a soft, lint-free cloth to wipe the screen and the exterior of your Navman. Do not use paper towels to clean the screen. Never attempt to disassemble, repair or make any modifications to your Navman. Disassembly, modification or any attempt at repair could cause damage to your Navman and even bodily injury or property damage and will void any warranty.
Tourer ₆₉₅ LM Software User Manual
Contents Contents ............................................................................................................................................ 2 How do I get started? ..................................................................................................................... 4 How do I use the touch screen?.................................................................................................... 5 Navigating on the screen ...................................................
How do I search for a POI by keyword?...............................................................................33 How do I receive current traffic information via TMC?.........................................................35 How will I know when a Traffic Event occurs? ...................................................................35 Traffic overview screen ............................................................................................................
How do I get started? The first time you use your Navman it may take several minutes to establish a GPS connection. How do I turn my Navman on for the first time? To get started for the first time, complete the following steps: 1. 2. Read the Important Safety Information Position your Navman in your vehicle Follow the instructions in the Quick Start Guide. CAUTION! Ensure that your Navman does not obstruct the driver's view, or interfere with the operation of the vehicle airbags and safety devices. 3.
How do I use the touch screen? Navigating on the screen To operate your Navman, touch the screen with your fingertip. You can perform the following actions: Tap Press and release an item displayed on the touch screen. Select Tap an item in a list or tap a command from a menu.
Main Menu The Main Menu is your starting point for searching for a destination. The Main Menu also allows you to customise your Navman, view saved locations as My Place/Home, and search for POIs nearby, and so on. Main Menu screen options and the order of the options may differ from the above, depending on your region, maps installed or model of Navman. Tap to show the next page of Main Menu. Search for places, areas and streets to help plan your route. Display the Map screen.
How do I navigate through the menu screens? How do I return to the Main Menu screen? You can return to the Main Menu screen at any time by pressing the Main Menu button on your Navman. How do I use the BACK button in the title bar? 1. From the Main Menu screen, tap the desired menu button to enter the menu screen. For example, tapping 2. will lead you to the FIND screen.
The Keyboard screen can display with various layouts depending on the information you need to enter, including alphabet, number, alternate characters and combinations of these. How do I enter characters/numbers? To select a character, tap the character. To delete a character, tap To enter numbers, tap . Tap and hold to delete the entire text. . How can I set my keyboard preference? . The Keyboard preference screen will display. 1. From the Keyboard screen, tap 2.
How do I go from A-B? WARNING! For your safety, enter destination information before you start a journey. Do not enter a destination while driving. How do I use the FIND wizard? Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. The FIND wizard allows you to search the location easily. 1. 2. On the Main Menu, tap to display the FIND screen.
How do I plan my first trip? Using your Navman to plan your first trip is easy. There are several ways to select your destination. Complete the following to navigate to a street address that you know using the FIND address wizard. Æ Æ Æ Æ Æ When it is the first time you use FIND wizard, the Select Country screen will appear before the FIND screen. Select your country and then you can start searching location. If needed, you can change the country to search location.
How do I preview the destination on map? After searching an address (or a POI), you can preview the destination on map to explore the area near the location. On the Destination screen, tap the button to display the destination preview map as below. On the destination preview map, you can: Tap the View the information of your destination that is shown at the top of the Map screen. / button to zoom in/out the map.
4. When done, tap . 5. The Map screen will display the calculated route in route simulation mode. Select a route type and tap and the route demonstration will start automatically. The simulated route will be displayed as orange colour. Caravan/Truck Mode The Caravan or Truck mode is not available on all models and is only available in selected countries. This feature is specifically designed for large vehicles.
When in Caravan/Truck mode, your route will be displayed using icon. How do I activate Truck mode after the free trial? Your Navman comes with pre-activated Truck mode service for one-month free trial. You will be prompted to purchase (from Navman e-shop online) and re-activate the service when the trial period has expired. A product key will be sent to you via email when you have subscribed. You will need to use this product key to activate your subscription. 1. Connect your Navman to the computer. 2.
How do I view my route? How do I select the route type? The Select Route Type screen will be displayed when you tap from the Destination screen. All of the four route types (Fastest, Economical, Easiest, and Shortest) will be calculated. Select your preferred route and tap to start navigating. For more information about setting the preferred route type, refer to the Route Options section in “What can I customise?” The driving map When you select a route type and tap by spoken and visual instructions.
Item Description Direction and distance of next turn The direction and distance to your next turn. Tap to repeat the vocal instruction. Current route Your current route is highlighted. Current position Your current position is marked with Address bar The current address will be displayed in the text box at the bottom of the Map screen. Distance and time information Tap to expand and select the following options: .
How do I view my route statistics? 1. From the Map options screen, tap . 2. Tap the tabs in the title bar to view the additional information in the different screens. 3.
3. Complete the following: If you want to … Then … increase/decrease the volume, tap mute/unmute, / The volume bar indicates the current volume level. . tap . The speaker icon indicates the status: : muted : unmuted The volume buttons will automatically disappear after the map is idled for 5 seconds. How do I zoom in/out the map? 1. From the Map options screen, tap 2. The zoom buttons will be displayed on the Map screen in translucent mode. 3.
Advanced Routing Functions IQ Routes™ Your Navman features IQ Routes, which intelligently anticipates congested roads at peak times so that they can be avoided. IQ Routes does this by using historical, anomalised data from millions of fellow drivers. Since IQ Routes helps you automatically avoid predicted heavy congestion, you will be able to save time and money during your journeys. IQ Routes is not available on all models and is only available in selected countries.
How do I create a trip with multiple stops? TRIP PLANNER is not available on all models and is only available in selected countries. Depending on your Navman model, you will be able to set multiple stops or waypoints for your trip. Your route will be calculated to go via each of these points in the specified order. 1. On the Main Menu, tap 2. Tap Create New Trip. The Edit screen will display. . The TRIP PLANNER screen will display. Æ 3. Tap Add. The Add as waypoint screen will display.
The Optimise function does not take all factors into account. Your waypoints might be reordered to reduce your estimated travel distance. Be sure to confirm the trip on the map and make adjustments as appropriate, particularly if your trip returns to the start location. How do I edit the waypoints in the trip? 1. On the Main Menu, tap 2. Tap the trip to edit. 3. Tap a waypoint in the trip. The Preview screen will display. . The Trip Planner screen will display. Æ 4.
How do I capture a location or a journey? The capture functionality is not available on all models. Your Navman has a capture feature which allows you to record GPS co-ordinates of a location, capture a location with a voice recording and capture a journey and save them so you can navigate back at a later time. How do I capture the GPS co-ordinates of my location? 1. Press the Capture button on your Navman. The Capture screen will display. 2. Tap Save, or wait for 5 seconds.
How do I navigate to a location I have captured? 1. On the Main Menu, tap . The MY PLACES screen will display. 2. Tap the captured destination you want to travel to ( 3. Tap ). The Preview screen will display. . Your Navman will calculate the route from your current location. The Map screen will display. How do I navigate to the saved car location? 1. On the Main Menu, tap 2. Tap Find My Car. The Find My Car screen will display. . The MY PLACES screen will display. 3. Tap .
MY PLACES MY PLACES has all your saved locations. How do I save a location as My Place or Home? 1. Search for an address until the Preview screen is displayed. 2. Tap 3. To save the location as Home, tap Tap . The Save screen will display. The location has been added to My Places. . The Edit screen will display. . The location has been set as Home. How do I navigate to a location I have saved? 1. On the Main Menu, tap . The MY PLACES screen will display.
How do I navigate to Home? If you have not set an address as Home, the first time you try to navigate to Home you will be prompted to search for an address using the address-entry wizard. 1. On the Main Menu, tap 2. Tap . The Preview screen will display. 3. Tap . Your Navman will calculate the route from your current location. The Map screen will display. . The MY PLACES screen will display. Once your home has been set on your Navman, simply tap directed to Home quickly.
How do I navigate to a NavPix™? NavPix™ is not available on all models and is only available in selected countries. NavPix™ is an image or picture, normally of a location, which contains embedded GPS co-ordinates that you can navigate to. To navigate to a NavPix™ location, either a GPS fix must have been available when the NavPix™ was taken, or GPS co-ordinates have been added using NavDesk.
4. Tap the thumbnail of the NavPix™. The NavPix™ will appear in full-screen. Item Description Tap to return to the previous screen. / Tap to start/stop slideshow. Tap to display the Navpix Details screen. Tap to calculate the route, open the Map screen and start navigating. How do I edit the NavPix™? 1. From the Album screen, tap the thumbnail of the NavPix™. The NavPix™ will appear in full-screen. 2. Tap 3. Complete the following: . The NavPix Details screen will display.
How do I search for a POI? A POI (Point of Interest) is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by category, such as petrol stations, parks, beaches and museums. How do I find the nearest POIs using NEAR ME? NEAR ME services allows you to quickly search the local area for common types of important POIs. Search for the nearest restaurants, cafes, fast-food premises and other dining establishments. Search for the nearest petrol stations.
3. Tap or to scroll up or down the list. Select the desired item to display the destination screen. 4. Complete the following: If you want to … Then … calculate the route and start navigating, tap save the location as a favourite, tap explore the map, . The Map screen will display. . The location will be saved in My Places immediately. tap . How do I customise the categories for search? 1. On the Main Menu, tap 2. Tap 3. From the pop-up message screen, do one of the following: .
How do I find the POIs using EXPLORE? EXPLORE is not available on all models and is only available in selected countries. The Explore map allows you to explore the local area to find Points of Interest (POIs) or navigate to an address. If you do not have a GPS fix, the map will display your last known position. 1. On the Main Menu, tap 2. On the Explore map, you can: . The Explore screen will display. View the information of the selected POI that is shown at the top of the screen.
How do I find a POI using the POI Cluster? Tapping on the POI selected will bring up the screen with the POI destination details. Æ Æ Æ Complete the following: If you want to … calculate the route and start navigating, save the location as a favourite, Then … The Map screen will display. tap explore the map, . tap . The location will be saved in My Places immediately. tap . How do I set my POI preferences? Points of Interest (POIs) are grouped into categories.
2. Complete the following: If you want to … Then … display all POI icons (i.e. icons from all categories), tap Show all. display no POI icons, tap Hide all. Hiding POIs will stop you from finding them when using explore mode/cluster search. select a specific POI category icon for display on the Map screen, return to the Explore map, tap the required POI category to show ( ( ) or hide ) on the Map screen. repeat until all required categories are selected. .
4. The POI Type Selection screen will display. Complete the following: If you want to … Then … search for POIs by keyword, . tap The Keyboard screen will display. After you have entered a keyword, tap OK. search for restaurants, cafes, fast-food premises and other dining establishments, search for petrol stations, search for parking places, 5. tap . tap . . tap view more POI types, . tap The POI Type List screen will display. Select a POI type. search for hotels and motels, tap .
How do I search for a POI by keyword? Complete the following to navigate to a POI or the street address that you find by keyword. 1. On the Main Menu, tap 2. Tap . . Enter the keyword of the POI or Street Address that you want to search.
3. Complete the following: If you want to … Then … calculate the route and start navigating, tap save the location as a favourite, tap explore the map, tap . The Map screen will display. . The location will be saved in My Places immediately. .
How do I receive current traffic information via TMC? Traffic information is not available on all models and is only available in selected countries. Your Navman can receive current traffic information for all main roads, motorways and major cities, enabling you to avoid potential delays on your route. Event messages and traffic icons will display as they occur. If an event message obscures your current location, the map will adjust to display both the message and your location.
Traffic overview screen When you see the traffic event message on your driving Map screen, you can open the Traffic screen to display a general overview of the traffic situation on your route, including all events in the immediate vicinity. On the Main Menu, tap to display the Traffic screen. Depending on your Navman model, traffic information may not be available, may require a subscription, or may require the Traffic Accessory Kit (may be sold separately).
Item Description Tap to return to the previous screen. Event icon Displays an icon to indicate type of event. Event description Displays details of the Event, including: Name of road and direction in which Event is taking place. Location of where Event begins and ends. o > indicates an Event from a location, to a location. o < > indicates an Event between locations. Sort by Type of Event.
How do I know if a detour is recommended? When a Traffic or Clearance event occurs on your route, a detour will often be recommended. The detour event message will display in the status bar on Map screen. Detours are only recommended for Traffic or Clearance Events on a calculated route. How do I avoid an event on my route? 1. On the All traffic events screen, tap the event. The Event Details screen will display. 2.
Traffic preferences You can view your current traffic system status and change options by customising the traffic preferences. TMC Service 1. On the Traffic Options screen, tap Traffic Service. The Traffic Service screen will display. The TMC service screen displays the frequency of the radio station currently used to receive traffic event information. A bar shows the strength of the traffic signal being received; the more green bars the stronger the signal. 2.
What is Travel Book? Travel Book is not available on all models and is only available in selected countries. Travel Book is a collection of city guides that provide detailed Points of Interest maps for major cities in local region. The city guides provide information on accommodation, dining, night life, business essentials, shopping, important tourist spots and practical information such as banks, medical centres, bus stations, etc. Travel Book is provided by third party.
How do I use the Michelin guides? 1. On the Main Menu, tap . The Michelin screen will display. 2. Select a category from the list. 3. Select a search filter from the list. 4. Enter the keyword to search a POI. When done, tap OK. 5. Select a POI from the list. The POI details screen will display. 6. Complete the following: If you want to … Then … calculate the route and start navigating, tap save the location as a favourite, The Map screen will display. . tap explore the map, .
What can I customise? Depending on your Navman model, certain setting options may not be available. There are various customisation options available to enhance your navigation experience. 1. On the Main Menu, tap 2. Select the option you want to customise from the Settings screen. 3. Once you change the settings and return to the previous screen, your preferences are automatically saved. . The Settings screen will display.
Screen Complete the following: If you want to … Then … change the displayed screen mode, tap Screen mode and select: change the screen brightness in day /night mode, Auto: set to automatically change between Day and Night modes. Day: set the screen to be displayed in Day mode. Night: set the screen to be displayed in Night mode. tap / on the Day brightness/Night brightness bar. The brightness bar indicates the brightness level.
If you want to … Then … o Speed limit + 5 km/h (Speed limit + 3 mph): set the system to alert while your speed is 5 km/h (3 mph) or more above the limit. o Speed limit + 10 km/h (Speed limit + 7 mph): set the system to alert while your speed is 10 km/h (7 mph) or more above the limit. set the speed limit alerts manually, tap Set manual speed alert to select the speed limit or turn it off.
If you want to … Then … set types of road options for your route, tap Types of road. The Types of road screen will display. Select your road preference from the list. Avoiding ferry routes may prevent you from navigating between certain countries, even when a bridge or tunnel exists. set the routing preference, set the avoidance manually, tap Advanced routing to turn the IQ Routes / LearnMe Pro functions on or off. Use historic traffic speed date: enable/disable the IQ Routes function.
Complete the following: If you want to … Then … enable/disable automatic zooming during navigation, tap Auto-zoom map when navigating to turn it on or off. display North at the top of the 2D Map screen, If selected, the Map screen will automatically zoom in or out, depending on your speed, to allow optimal viewing of your route. tap Keep North at top of 2D Map screen to turn it on or off. If set to Off, the direction you are travelling in will display at the top of the 2D Map screen.
Language The available settings of the Language option can be customised by adding/deleting the voice file through NavDesk when your Navman is connected to the computer. For more information, refer to the My Navman section in “What is the NavDesk?” Complete the following: If you want to … Then … change the on-screen language, tap Language and select your preferred language from the list. change the voice scheme, tap Voice and select your preferred voice scheme from the list.
Time Zone Complete the following: If you want to … Then … set the time zone automatically, select Auto time zone. change the time zone manually, select Manual time zone, then adjust the setting by tapping / . Trip Meter The Trip Meter option displays the information of your trips.
Complete the following: If you want to … Then … delete the saved information on your Navman, tap Delete saved information: restore factory default settings, Tap Delete My Places and tap Yes when the warning dialog box displays. The data saved in My Places will be deleted. Tap Delete recent locations and tap Yes when the warning dialog box displays. The data of recent locations will be deleted. Tap Delete planned trips and tap Yes when the warning dialog box displays.
Complete the following: If you want to … Then … enable a shop demonstration of Navman Spirit to be played, select a demonstration country from the list and tap Start. Tap OK. Your Navman will restart. When your Navman is in Shop demo mode, you will see the navigation demonstration of the pre-defined route without having to set a destination. You cannot operate your Navman properly in Shop demo mode. Help Complete the following: If you want to … Then … view the tutorial, tap View Tutorial.
What is the NavDesk? NavDesk is a suite of tools you can use to access greater functionality and product information via your computer.
5. 6. Follow the screen prompts to install NavDesk: Review and accept the Licence Agreement for NavDesk when prompted. Select a destination folder for NavDesk when prompted. When the installation is complete, click Finish. NavDesk will open.
Component Description My Maps Install and manage maps. Custom POIs Application that allows you to import custom POIs. Photo Album Import and edit NavPix™ images. Image Search Search online and download NavPix™ which can be added to My Places or Navman. Application Gallery Customise and rearrange applications available on the Main Menu screen of your Navman. Unlock Features Allow you to enter the activation key for the service you purchased. This feature is powered by Flickr™.
How do I purchase a subscription? 1. Select a type of subscription. A list of regions will display. 2. Select a region. A list of available subscriptions will display. 3. Select a subscription or offer, then click Purchase an activation key from the Navman store. The Navman Store website will open. 4. Follow the prompts to purchase your subscription. A product key will be sent to you via email when you have subscribed. You will need to use this product key to activate your subscription.
My Maps My Maps allows you to install new maps, remove maps from your Navman and purchase new maps. The downloaded/purchased map (*.iso) from Navman Store website will be saved on your computer’s map folder (e.g. C:\username\Documents\Maps) and then displayed in My Maps. The default map folder may vary depending on your Operating System. You can change the setting of NavDesk to locate the map folder where you save the map by clicking MY NAVMAN Æ Options Æ My Maps Æ Change.
3. During the download operation, you can: 4. View the download status from the downloading bar. Stop the download by clicking Pause the download by clicking . , and then resume download at a later time by clicking . When finished, the downloaded map update will be displayed in My Maps. How do I install maps onto my Navman? Your Navman comes with one or more pre-activated maps. Map files take up space on your Navman’s internal memory.
7. Complete the following: If you want to … Then … install a yellow map, go back to step 6. install a red map, the map needs to be activated via the Internet before it can be installed; go back to step 4. install the selected maps to your Navman, continue to step 8. 8. Select the destination media (Navman internal memory) for the selected maps, then click Install Maps. The selected maps will be installed and change colour to green. 9. To use your Navman, disconnect the USB cable.
To create your POI files, open Microsoft Excel and then enter the POI location details (including Longitude, Latitude, Name, and Description) in separate cells. Always use decimal degrees for coordinates and start a new location from a new line. When done, click File Æ Save As to save it as a *.csv file. Now you have successfully created a POI CSV file.
If you want to … Then … should sound, To change the units used to measure distance for this POI category, from the tools menu click on options and from the general option select Use metric units check box. enable a warning sound when a POI of this category is in close proximity, select the Audio alert check box. select a custom sound alert file to play when a POI of this category is in close proximity, either select a sound file from the list, or click Add to select a sound file (.
Component Description Desktop albums Displays a list of all albums stored in the NavPix™ library on your computer. Click an album to display its contents in the Album display area. Click View all NavPix to display all pictures stored in the NavPix™ library on your computer. My Navman albums Displays a list of albums stored on the Navman internal memory and on the memory card if one is inserted. Selected picture When a thumbnail is selected it displays with a blue border.
How do I transfer pictures from Photo Album to my Navman? You can transfer pictures from your computer to your Navman. You can import any JPEG (.jpg) into Photo Album, add or edit GPS information, and then copy the picture to your Navman. 1. From the Toolbar section, select Import NavPix. The Open dialog box will display. 2. Select a NavPix™ from a folder on your computer and click Open. Thumbnails of the NavPix™ will display in the Album display area.
upload pictures to Flickr™ export to disk export pictures to Google Earth™ search for pictures view all pictures in the library If you want to … Then … add a picture to another album, in the Desktop albums section, select the album containing the NavPix™ you want to include in another album. Select the NavPix™ then drag it to the other album. The selected NavPix™ is included in the new album, but is not moved, i.e.
If you want to … Then … You need to install the Google Earth software on your computer to be able to view the file you have created. You can download Google Earth from earth.google.com search for other NavPix™, right-click on the desired NavPix™ and select Search for NavPix near this. view all pictures in the library, click View all NavPix at the bottom of the Desktop album section.
Image Search is a NavDesk application powered by Flickr™ allowing you to download photos and import them to Photo Album. You can then upload the photo to the Flickr website, transfer photos to your Navman, export pictures to Google Earth or search for other NavPix™ near the longitude and latitude of your NavPix™. How do I download NavPix™ from the internet? 1. In the Description field enter a search description for the image you are looking for. 2. Select one of the Sort by options. 3. Click Search.
How do I remove an application from my Navman? The following applications cannot be removed from your Navman: 1. Select any application from the Device Main Menu screen section. 2. Drag and drop the application to the Available Settings section. 3. Click Save to Device. The application is removed from the Main Menu screen on your Navman and is no longer accessible. How do I add an application to my Navman? 1. Select any application from the Available Settings section. 2.
Redeem NavDesk Æ Redeem To redeem Navman’s lifetime map update service, you need to enter the product key using the Redeem application. Please note that the product key can only be used once and is not transferable. Make sure you have an active Internet connection for this feature. The product key is printed on the flyer that is enclosed in the package.
Make sure you have an active Internet connection for this feature. You can install a maximum of 99 locations on your Navman via My Places. How do I sort My Place locations? You can sort My Place locations by type and name: If you want to … Then … sort My Place locations by type, click Type on the My Places panel. sort My Place locations by name, click Name on the My Places panel.
If you want to … share the location, Then … If the location is a captured journey, your friend will receive the journey as a *.KMZ file attached to the email. Your friend will need to have Google Earth installed on the computer to view the KMZ file. If the location is a captured voice recording, your friend will receive the voice recording as a *.wav file attached to the email. delete the location, , then click Yes to delete the location.
How do I pre-plan a route by search? 1. From the Route planner panel, set your From point and To point. You can find a location by: : Keyword : Address : Postcode Input your content and click your search results. 2. to start a search. You may need to select from a category list to narrow Complete the following: If you want to … Then … add a waypoint, click Add Waypoint. reset or remove a waypoint, set the route preferences, next to the waypoint.
How do I edit a route? 1. From the Pre-planned Routes section select a route to edit. 2. Complete the following: If you want to … Then … rename the route, click the title of the route in the Name column, then enter a new name and press ENTER. Your changes are automatically saved. delete a saved route, click next to the route you want to remove. MY NAVMAN NavDesk Æ MY NAVMAN How do I change the displayed language for NavDesk? You can change the language for NavDesk. 1. Click Language. 2.
Voice files take up space on your Navman’s internal memory. If you do not use a voice file, you can remove it to free up space. You can later reinstall it to your Navman if required. The provided DVD of your Navman is needed while installing the voice file. How do I report mileage? Mileage Reporter is not available on all models. Mileage Reporter is a NavDesk feature that allows you to create expense reports (.csv format) based on the mileage and estimated fuel usage recorded by your Navman.
How do I backup and restore my Navman? You can save backups of data from your Navman, and later restore it if required. 1. Click Backup and Restore. 2. Complete the following: If you want to … Then … backup your Navman, click Create new backup. Select the data you would like to backup. Click OK. The backup will be saved to your computer. The backup will be listed on the Backup & Restore window. restore a backup to your Navman, select the backup from the list that you would like to restore.
3. When completed, the downloaded file will be saved to the assigned folder. For software update, the *.exe file will be launched automatically to install the update. For map update, the system will display the My Maps screen automatically to install the update. How do I configure NavDesk? Depending on your Navman model, certain setting options may not be available. 1. Click Options, and then select the desired setting options to configure. 2.
For more information Point of Interest categories Icon Description Icon Description Airport Amusement park Art centre ATM/Cash dispenser Bank Bar/Pub Beach Breakdown service/Car repair facility Bowling centre Business facility or company Business office Bus station Camping ground Car dealer/Automobile dealer Casino Cemetery Church Cinema City hall City, town or village Coffee shop College/University Community centre Commuter railway station Courthouse Dentist Doctor Embassy E
Icon Description Icon Description Museum Music centre Natural attraction Nightlife Park and ride Parking Parking garage Park/Recreation area Performance art/Theatre Petrol station Pharmacy Place of worship Police station Post office Public restroom/Toilet facilities Public sport airport Railway crossing Rental car agency Rest area Restaurant Road accident black spot Scenic/Panoramic views School School zone Shop Shopping Ski resort/Ski lift station Speed check Sport centre S
My Places categories Icon Description Home Saved locations Captured journey (for selected models) Traffic and other TMC Events Each TMC Event is sorted in to one of nine categories. When an Event is received, one of the following icons will display: Event Avoided Event Message Type Event Description Danger There is a dangerous situation on the route; for example, people are on the road. Traffic Any event that will cause a delay on a route.
Online support For 24/7 help and support with Navman products, visit our Technical Support website at: www.navman.com Speed Limit Navman products are designed to be used as an aid to safer driving. Navman does not condone speeding or any other failure to comply with your local traffic laws. It is your responsibility to drive within the posted speed limit at all times and to drive in a careful manner.
