Operation Manual

SPEED 2100 Installation and Operation ManualNAVMAN
4
Simulation
This feature demonstrates the operation of the
instrument. In this mode the digits randomly count
up and down.
To activate this mode:
1. Power up the instrument
2. Press and hold the key for 15 seconds
until
is displayed. The display will start
counting randomly.
Press for 15 Seconds
3. To disable the simulation mode, press and
hold the
key for 15 seconds until is
displayed again. The display will revert to 0.0.
Press for 15 Seconds
The instrument always powers up into the SPEED
mode.
Modes
Press the key to toggle between the SPEED and
TRIP LOG modes.
SPd
Log
>
/
>
/
Press and hold the key to display the TOTAL
LOG, release to show the temperature.
oF oC
796
>
/
>
/
1 Operation

