Extra Information

11
 When activation has completed, the map will change colour to yellow; continue to step 7.
7. Click the map you want to install to your Navman.
The map will change colour to a brighter yellow to indicate it has been selected.
 To deselect a map, click the map again.
You may need to install multiple maps to cover the required geographical area.
8. Complete the following:
If you want to ... Then ...
select a yellow map go back to step 7.
select a red map the map needs to be activated via the Internet before it can be
installed; go back to step 5.
install the selected maps to your Navman continue to step 9.
9. Select the destination media for the selected maps, then click Transfer Now.
The selected maps will be installed and change colour to green.
10. To use your Navman, disconnect the USB cable.
WARNING: Do not disconnect the USB cable from the Navman USB Socket until the installed map
or maps have changed colour to green.
How do I remove maps from my Navman?
1. Click My Maps.
The My Maps application will display.
2. From the My Navman panel, clear the check box next to the map you want to remove.
3. Click Remove Maps.
4. Confirm that you want to remove the selected map when prompted.
The map is removed from your Navman.