Installation Instructions

iCN 700 Series - Map Installation Guide
10
3. Select your preferred language for Smart5 Desktop.
4. Click Install SmartST Desktop.
5. Follow the screen prompts to install Smart5 Desktop:
 Review and accept the Licence Agreement for Smart5 Desktop and
Microsoft ActiveSync (if not already installed on your computer) when
prompted.
 Select a destination folder for Smart5 Desktop when prompted.
 When the installation has finished, click Finish.
Smart5 Desktop will open.
6. If prompted to connect your iCN to your computer, complete the following:
 Plug the large end of the USB cable directly into a USB port on your
computer (not a USB hub) and plug the small end into the USB Socket (
)
on the side of your iCN.
Where possible, plug the USB cable into a USB port at the back of your computer.
 Plug the small end of the AC Power Pack cable into the  socket on the
side of your iCN; plug the other end into the mains.
 Press
O.
Your iCN will turn on.