Operation Manual

Viewing the Current Navigation

If you leave the Navigation screen, you can easily return to it by

selecting Navigation from the main menu.

Checking the GPSStatus

Your M-Nav 900/950 has an internal GPS antenna so you can

always receive a GPS signal, find your current location and use

the M-Nav 900/950 for navigation. For best operation, ensure

your M-Nav is positioned where it has a good view of the sky. If

necessary, you can check the GPS status.

1. From the main menu, swipe the notification bar upwards

to show the Notifications menu.

Press and hold to show the GPS status screen. It dis-

plays the satellites currently being used for positioning

and a graph of the relative signal strength.

M-Nav 900/950 | User Guide

Checking the Qube Tracking Device Status

Your M-Nav is connected to a Qube tracking device that com-

municates information about your vehicle to the OnlineAVL2

application.

The Qube tracking device also enables you and your fleet admin-

istrator to send and receive messages to each other (see Mes-

sages on page 8).

To check the status of the Qube tracking device at any time, dis-

play the ‘Main Menu’. Check the color of the Qube tracking

device icon shown in the notifications bar at the bottom of the

screen.

The color coding for the Qube tracking device icon is described

below:

Green The M-Nav 900/950 is connected to the Qube

and has cell connection.

Red The M-Nav 900/950 is not connected to the

Qube.

Blue The M-Nav 900/950 is connected to the Qube,

but there is no cell connection.

Green

Satellite

The Qube is communicating via satellite (cell

connection is not available).