M-Nav 900/950 User Guide GPS Tracking and Management Solutions
Copyright © Copyright 2015 Navman Wireless Holdings LP. Navman Wireless is a registered trademark of Navman Wireless Holdings LP. All rights reserved. All other trademarks and registrations are the property of their respective owners.
Important Safety Information Do NOT mount the M-Nav 900/950 where it obstructs the driver’s view or may distract the driver. Do NOT mount the M-N 900/950 where it may interfere with the safe operation of the vehicle or the deployment of airbags or other safety equipment. If necessary, consult the vehicle manual to ensure the mounting location is safe. Do NOT enter navigation data or other information into the M-Nav 900/950 while you are driving. Comply with these safety instructions at all times.
Table of Contents Introduction Glossary of Terms Box Contents M-Nav 900/950 Specifications M-Nav 900/950 Overview Installing the M-Nav 900/950 Attaching the Docking Cradle to the Windshield Adding the M-Nav 900/950 to the Docking Cradle Getting Started Disclaimer and Warning Screens Driver Log In & Status Setting Truck Attributes Viewing the Current Navigation Checking the GPS Status Checking the Qube Tracking Device Status Settings Information Screen Driver Log Out Voice Command Activating Voice Command St
along or nearby the route, such as a fuel location or a post office. You can add a POI to your route as a via point. Introduction Thank you for purchasing the Navman Wireless M-Nav 900 or M-Nav 950 messaging and navigation device. We hope you enjoy using it. It has been carefully designed so it is easy to install, set up, and use.
M-Nav 900/950 Specifications Component M-Nav 900/950 Overview Description Display 800x480 6.1” WVGA Touch Panel Capacitive Touch Processor Type MediaTek MT8123, 1.2 GHz quadcore Operating System Android 4.
Installing the M-Nav 900/950 Refer to the Garmin manual for instructions on assembling the docking cradle and windscreen mount, and installing the unit in the vehicle. Attaching the Docking Cradle to the Windshield NOTE The M-Nav 900/950 will charge only when connected to a Qube tracking device in a standard vehicle installation, or when using an AC adaptor supply. It will not charge effectively when connected to a standard USB connection through a PC or similar and powered on.
the OnlineAVL2 application. If these have been enabled, you cannot use the M-Nav 900/950 until you enter these details. IMPORTANT The M-Nav 900/950 must be in the docking cradle and connected to the Qube tracking device in order for you to report your driver status to your fleet administrator through the OnlineAVL2 application. The Navman Wireless icon in the bottom status bar will show green when the M-Nav has a connection to the Qube. It shows red when not connected.
Viewing the Current Navigation If you leave the Navigation screen, you can easily return to it by selecting Navigation from the main menu. Checking the GPS Status Your M-Nav 900/950 has an internal GPS antenna so you can always receive a GPS signal, find your current location and use the M-Nav 900/950 for navigation. For best operation, ensure your M-Nav is positioned where it has a good view of the sky. If necessary, you can check the GPS status. 1.
Settings Voice Command You can access the settings page from the main menu by selecting Settings. From anywhere else inside the app, select tings. > Set- Voice Command allows you to use your M-Nav 900/950 by saying words or commands. The voice command menu provides voice prompts and a list of available commands.
Messages The M-Nav 900/950 can store an unlimited number of incoming and outgoing messages and forms. IMPORTANT The M-Nav 900/950 must be in the docking cradle and connected to the Qube tracking device in order for you to send and receive messages, and otherwise communicate with your fleet. From this screen you can select: Types of Messages The Message feature on the M-Nav 900/950 enables you and your fleet administrator to communicate with each other.
NOTE If the Form message does not require a reply, the Reply button is not displayed. If the Form message contains a Route To address, the Go and Show buttons will be displayed. Numeric When a field is set up as numeric field by your fleet administrator, you can only enter numbers in it. You can tap the field to display a numeric keyboard.
Drop-Down Menu A drop-down menu is represented by a . This field allows you to select an item from a list. You can select the field to display the list of options. Swipe up and down to view all items on the list. Tap the item to select it and it will be displayed on the field. A customer can sign on the white signature field. You can then select OK to go back to the form. Checkbox The checkbox field allows you to select one or more item from a given list or choices. You can tap the item to select it.
Receiving a New Message When you receive a new message, the "New Message" pop-up box is displayed and a friendly alert sounds. You can select: l Read to display the new message. l Cancel to store the message to read later when it is safe or convenient. When a new priority message arrives, the pop-up box will not have a Cancel button. Select a message to read it. It will be displayed along with any previous replies. If you cannot see all of the message, swipe and scroll down the screen.
4. Select Send. The message is stored in your Sent messages list. Sending a Form You can send a Form as a new message or a reply to a received message. The forms available in your M-Nav 900/950 are set up by your fleet administrator. NOTE This section assumes the reply Form is already displayed. 1. Complete all the fields included in the form. Some fields may be greyed out if the information is entered automatically. 2. When you have completed all fields, select to send the form.
Displaying EMS information From the main menu, select EMS. The EMS Dashboard screen is displayed. Depending on how it was set up by your administrator, you will see four, six, or eight options. 3. You can select the following: l Update Period to change the rate that updates are displayed (the default is one second). l Trip Report to toggle between On/Off (the default is On). l EMS Diagnostics to show diagnostic information for all options that have been set up. This may be used for troubleshooting.
Harsh Events Working Time The M-Nav 900/950 allows you to record when you are starting a new task, taking a break, or finishing work. The list of tasks will be set up by your fleet administrator. You can access the Working Time screen from the main menu.
Driver Awareness Report Restoring Factory Default Settings You can view and track all of the harsh events that you have generated by selecting Metrics from the main menu. This opens the Driver Awareness Report, which displays the number of Warning and Violation alerts that you have generated. In the unlikely case of any problems with your M-Nav 900/950 that you cannot otherwise resolve, you can restore the factory default settings. 1. From the main menu, select Settings. 2. Select Device Settings.
Contact Information Navman Wireless welcomes your feedback. Navman Wireless UK Innovation Centre 2, Keele University Science Park Keele, Newcastle Under Lyme Staffordshire, ST5 5NH UNITED KINGDOM Tel: +44 (0) 1782 55 79 50 Fax: +44 (0) 1782 55 79 79 Email: support@navmanwireless.co.uk Website: www.navmanwireless.co.uk Navman Wireless USA Navman Wireless North America 2701 Patriot Boulevard, Suite 125 Glenview, IL 60026 USA Tel: +1 (866) 527 9896 Fax: +1 (847) 729 5988 Email: us.support@navmanwireless.
