Operation Manual

The Custom POIs (Points of Interest) application allows you to create or import your own POI files. These are
called custom POIs. Unlike preinstalled POIs, custom POIs can be removed from your Navman and can have
audio as well as visual alerts associated with them.
How do I install custom Points of Interest?
Various POI files are available for download free or by subscription from third-party websites. Ensure that
downloaded files are in .csv (Comma Separated Values) format. Navman is not responsible for the content or
accuracy of the information or the reliability or availability of these websites. The use of information regarding
safety camera locations may be subject to local laws in the country of use. You are responsible for checking
that you can use the information in your country or in the country where the information will be used.
1. In the Add new POIs section, click Browse to select a source file.
The Open dialog box will open.
2. Select the file from your local or network drive, then click Open.
3. From the POI Category section:
If you want to ... Then ...
use an existing custom POI category, select the Existing category option, then select a type
from the drop down list.
Replace an existing POI, select the Existing category option and a type from the
drop-down list, then select Replace existing POIs.
If you want to create a new POI instead, then select
Add to existing POIs.
create a new custom POI category, select the New category option, then type a name for
the POI category.
4. Set Alert setting as required:
If you want to ... Then ...
enable a visual warning when a POI of this
category is in close proximity,
select the Visual alert check box.
select an icon to display on the map
screens for POIs of this category,
click Browse to select the icon file from your local or
network drive.
 When you have located the icon file, select it and
click Open.
 The icon file must be a bitmap (.bmp) graphic with a
minimum size of 6x6 pixels and a maximum size of
32x32 pixels.
If you do not select a custom icon, a default icon will
display.
select the distance from a POI of this
category at which the visual warning
should display or the warning chime
should sound,
select the distance from the Distance box.
To change the units used to measure distance for this
POI category, from the tools menu click on options and
from the general option select Use metric units check box.
enable a warning sound when a POI of this
category is in close proximity,
select the Audio alert check box.
38