Operation Manual

You may need to install multiple maps to cover the required geographical area.
7. Complete the following:
If you want to ... Then ...
install a yellow map, go back to step 6.
install a red map, the map needs to be activated via the Internet before
it can be installed; go back to step 4.
install the selected maps to your Navman, continue to step 8.
8. Select the destination media (Navman internal memory) for the selected maps, then click Install maps.
The selected maps will be installed and change colour to green.
9. To use your Navman, disconnect the USB cable. You may need to manually reset your Navman.
WARNING: Do not disconnect the USB cable from the USB Socket until the installed map or
maps have changed colour to green.
How do I remove maps from my Navman?
1. Open NavDesk, and then click My Maps.
2. From the My Navman panel, select the check box next to the map you want to remove.
3. Click Remove Maps to remove the selected maps.
4. Confirm that you want to remove the selected map when prompted. The map is removed from your
Navman.
You can reinstall these maps at any time via NavDesk.
Custom POIs
Depending on your Navman model, some Custom POIs features may not be available.
NavDesk Æ Custom POIs
37