Operation Manual

36
Diesel fuel flow sensor kit Installation and Operation Manual
NAVMAN
Tachometer cable
Supply fuel line
Primary
filter
Return fuel line
Yellow connector
Link cable
Display unit,
DIESEL 3200
Diesel
engine
Supply
flow
sensor
Diesel
tank
Return
flow
sensor
Sensor cable
Brown connector
Brown connector
White connector
Tachometer
pickup
Note: The diesel sensors
can be used in 12 or
24 V DC systems. Some
display units, such as
the DIESEL 3200 require
12 V DC. Before connecting
any power greater than
12 V DC to the display
unit, check that the unit
can tolerate the intended
voltage.
Note: Each flow sensor has an LED
underneath, between the connectors.
Check that the LED blinks when fuel is
passing through the sensor.
Optional paddlewheel speed
sensor cable, blue plug
Black
Red
External alarm
(optional)
Fuel transducer (white plug)
White
Green
Yellow
Orange
Blue
Speed transducer (blue plug)
NavBus (optional)
-
NMEA in (GPS, optional)
NMEA out (optional)
Ignition Switch
Fuse
}
12 VDC