User manual

B2+ Traffic Module | How do I view my route?
20
Item Description
Information Displays one of the following options:
 Time
 km/h or mph (Speed)
 TTG (Time to Go)
 DTG (Distance to Go)
 ETA (Estimated Time of Arrival).
Tap to cycle through the options.
During a Multi-stop trip, Time to Go, Distance to Go and ETA will
appear as: Time to Waypoint, Distance to Waypoint and ETA at
Waypoint.
Cancel route Cancels your current route.
Zoom
To view zoom options, tap
.
 To display a smaller area in greater detail, tap
.
 To display a larger area in less detail, tap
.
Compass and GPS
Information
Tap to cycle through the options;
 Blue compass heading - Tap and hold to alternate between
displaying North or your destination at the top of the screen.
Tap and hold to display the GPS Status screen.
 Green quadrants - Indicates a valid GPS signal is being used to
fix your position. Between one and four quadrants will display
indicating the signal strength. Tap and hold to display the GPS
Status screen.
 Red circle - Indicates No signal.
Status bar Displays one of the following:
 The name of the street you are located on
 Speed warnings
 Active categories.
Status Bar is replaced by current Traffic Events, when
Traffic is enabled. For more information, see "Traffic
information" on page 16.