Navman 50 User Manual
Table of Contents Precautions and notices....................................................................3 Getting to know the dash cam...........................................................3 Inserting a memory card....................................................................5 Formatting a card........................................................................6 Using your dash cam in a vehicle......................................................6 Operating basics........................
About charging....................................................................16 About the charger...............................................................16 About the battery.................................................................
Precautions and notices • • For your own safety, do not operate the controls of the product while driving. A window mount is needed when using the dash cam in a car. Make sure that you place the dash cam in an appropriate place, so as not to obstruct the driver’s view or deployment of airbags. Make sure that no object is blocking the camera lens and no reflective material appears near the lens. Please keep the lens clean.
❷ Name Description Power key • • ❸ Status indicator • • • 4 Press briefly to turn on the device; press and hold to turn off the device. When the device is on and not recording: press briefly and repeatedly to cycle through the operation mode: video > capture > playback. Glows in red when charging is in progress. (The indicator will be off when the device is fully charged.) Flashes in green when recording is in progress. Glows in green when the device is turned on.
Name Description ⓭ Menu key • • • ⓮ Memory card slot Data is recorded to a MicroSD card. Opens the settings menu when not recording. Returns to the previous screen. Changes the speed (1X, 2X, 4X, 8X) during video playback. Inserting a memory card CAUTION: Do not apply pressure to the centre of the memory card. You have to insert a memory card before you can start recording. Your device supports Class 10 memory cards with up to 32 GB capacity.
Formatting a card If you need to format a memory card (all data will be erased): 1. When not recording, press 2. Select Format and press 3. Select Yes and press twice to open the Setup menu. . . Using your dash cam in a vehicle CAUTION: Select an appropriate location for mounting the device in a vehicle. Never place the device where the driver’s field of vision is blocked. DO NOT insert or remove the memory card when operating the dash cam.
Operating basics CAUTION: DO NOT remove or insert the memory card while recording. Connect the dash cam to the car charger according to the installation instructions in the previous “Using your dash cam in a vehicle” section.
Setting the date and time To make sure of the correct date and time for your recordings, please check the date and time settings before you begin recording. twice to open the Setup menu. 1. When not recording, press 2. Select Date/Time and press 3. 4. . Select Set and press Press the Power key repeatedly to change the setting fields. • Date format • Date fields • Time fields Use and . to select the desired setting and press .
❶ ❷ ❽ ❸❹ ❼ ❺ ❶ Current operation mode ❺ Battery power status ❷ Image resolution ❻ Elapsed time of recording; remaining time for recording ❸ Microphone status ❼ Current time ❹ Memory card status ❽ Current date ❻ Note: If continuous recording is ongoing but there is not enough space on your memory card, new video clips will replace the old ones. Note: When not recording, you can open the Video menu by pressing .
❶ ❷ ❸ ❶ Current operation mode ❷ Image resolution ❸ Remaining amount of photos Note: In capture mode, you can open the Capture menu by pressing . Playback mode To select a video or photo for playback (when not recording): 1. Press the Power key briefly and repeatedly to switch to playback mode. The screen will display the latest file. 2. Press 3. During playback, you can use ❶ ❷ ❸ to play/pause the playback. / to switch to the previous/next file.
File management Protecting files You can protect files from being deleted. 1. When not recording, press the Power key briefly and repeatedly to switch to playback mode. 2. Press to open the Playback menu. 3. Select Protect and press 4. To add protection to the current file, select One and press and press . . . Select Set • To add protection to all files, select All and press press . • To add protection to a certain file, select Select and press the desired file and press . . Select Set and .
Deleting files CAUTION: Deleted files cannot be recovered. Make sure to back up your files before deletion. You cannot delete the protected files. 1. When not recording, press the Power key briefly and repeatedly to switch to playback mode. 2. Press to open the Playback menu. 3. Select Delete and press 4. To delete the current file, select One and press . . • To delete all files, select All and press • To delete a certain file, select Select and press file and press . . .
Menu Capture Playback Setup Item Description G-sensor Sets the sensitivity level of the G sensor, or disables the G sensor. Resolution Sets the image resolution. Time Stamp Sets how you want to show the date and time in the photos. Delete Deletes file(s). Protect Protects or removes the protection of the file(s). Thumbnail Switches to the thumbnail view. Volume Adjusts the volume level. Format Formats a memory card. (All data will be erased.) Language Sets the language. Sys.
Caring for your device Taking good care of your device will ensure trouble-free operation and reduce the risk of damage. • Keep your device away from excessive moisture and extreme temperatures. • Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time. • Do not place anything on top of your device or drop objects on your device. • Do not drop your device or subject it to severe shock. • Do not subject your device to sudden and severe temperature changes.
• • To discourage theft, do not leave the device and accessories in plain view in an unattended vehicle. Overheating may damage the device. Regulatory information For regulatory identification purposes, Navman 50 Series is assigned a model number of N526. CE Products with the CE marking comply with the Electromagnetic Compatibility Directive (2014/30/EU) - issued by the Commission of the European Community.
The manufacturer cannot be held responsible for modifications made by the User and the consequences thereof, which may alter the conformity of the product with the CE Marking. WEEE This product must not be disposed of as normal household waste, in accordance with the EU directive for waste electrical and electronic equipment (WEEE – 2012/19/EU). Instead, it should be disposed of by returning it to the point of sale, or to a municipal recycling collection point.
• • • carrying case. Connect the charger to a proper power source. The voltage requirements are found on the product case and/or packaging. Do not use the charger if the cord becomes damaged. Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. About the battery • • • Use a specified battery in the equipment. CAUTION: This unit contains a non-replaceable internal Lithium Ion battery.
Revision: R00 (4/2017) Trademarks All brand and product names are trademarks or registered trademarks of their respective companies. Disclaimer Specifications and documents are subject to change without notice. MiTAC does not warrant this document is error-free. MiTAC assumes no liability for damage incurred directly or indirectly from errors, omissions, or discrepancies between the device and the documents. Notes Not all models are available in all regions.
MiTAC Europe Ltd www.navman.
