User Manual

22 | USER MANUAL
EN
Night light Turn on when it’s dark to improve image brightness.
Stamp This function adds date stamp or device logo to the record. Click “OK” to select type of stamp or to
switch the function o.
Parking monitor When the device in the standby mode will detect the vibration, it will automatically start recording. If for
one minute vibration will not happen again, the device goes into standby mode.
Motion detection function is available in the Parking mode (disabled by default). In the Video recording
mode, select “Motion event REC”. When an object is moving the device will automatically start recording.
If the object does not move for more than 10 seconds, recording stops.
Battery Red indicator lights up when the device is plugged into an external power supply; as the battery is
charging, the red light will gradually dim; the red light going out means the battery is full.
Screen saver The device can automatically shut o the screen to reduce power consumption; time interval can be
set in the Screen Saver menu.