User's Manual

Smart Probe User Manual
20
4.1.3 Charging the Smart Probe
Connect the charging cable to the charging port of the Smart Probe (see fig. 4).
Fig. 4 – Connecting the charging cable to the charging port of the Smart Probe.
Connect the charging unit to an appropriate 240v power socket
• When the Smart Probe is powered OFF there is no visual indication of charging. When
charge is complete the unit will stop drawing charge from the connected charger.
• When the Smart Probe is switched ON there is a visual charge icon shown at the top left
of the screen (see fig. 5).
Fig 5 – Charge active icon.