Operation Manual

User’s manual SEAT Portable System
- 96 - Car Info
11.4.2 Selecting the period
In the TRIP COMPUTER window tap on the Period button (it is labelled
with Since Start or with Long term).
Select the period for which you want the data to be presented.
► Since Start: This period will always begin again when the ignition
has been off for 2 hours or more.
► Long term: This period will always begin again when you press and
hold the reset button of the day odometer on the vehicle's
instrument panel for at least 5 seconds.
11.5 Status
The navigation device can show two round instruments. You can
configure which instruments are shown.
11.5.1 Opening the Status window
1. If necessary, tap on (Main menu) to open the START
window.
2. In the S
TART window, tap on Car Info > Status.
The STATUS window opens.
11.5.2 Configuring the Status window
The navigation device can show the following instruments:
► RPM Gauge
► Coolant Temperature
► Outside Temperature
Note: It is possible that your vehicle does not support all the
instruments which can be shown by the navigation device. In this case
the choice will be limited.
1. In the STATUS window tap on Car Info > Gauge 1 to configure the
left round instrument.
- or -
► In the STATUS window tap on Car Info > Gauge 2 to configure the
right round instrument.
- or -
► In the STATUS window tap on the round instrument which you want
to reconfigure.
The G
AUGE 1 or GAUGE 2 list opens. It contains all the instruments
which can be shown. The instrument currently presented is marked.
2. Tap on the instrument which you want to be shown.