Operation Manual

User’s manual SEAT Portable System
- 46 - Navigation
Start Navigation
► Tap on the button of the route which you want to use for the
navigation.
If you select a route for which traffic obstructions have been announced,
the P
REVIEW TMC window may open before navigation starts. (Refer to
"Preview TMC" on page 87)
► Select whether you want to use the original route (Current Route) or
a detour (Alternative route).
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "Waiting for GPS-Signal…"
You have the following options:
► Wait. As soon as GPS reception is good enough for determining
your position, the route will be recalculated and navigation will
begin.
► Tap on Cancel. The window in which you entered your destination
will open again. Your destination is saved in the LAST DESTINATIONS
list.
► Tap on Demo. The route will be calculated using the centre of the
destination location as starting point. Navigation will then be
simulated on this route.
Tap on (Back) in order to terminate the demonstration.
Note: If you selected the destination on the map, then the Demo button
is not available.
7.3 Managing destinations
Every destination you enter and destinations from the LAST
DESTINATIONS and IMPORTED ADDRESSES lists can be saved in the
F
AVOURITES list. This makes sense if you frequently navigate to this
particular destination.
Note: Favourites are indicated on the map by a small flag with their
name.
7.3.1 Saving destinations
1. Enter a destination. (Refer to "Entering a destination address " on
page 34 or "Points of interest" on page 37). Do not tap on the Start
Navigation button!
2. Tap on Options > Save Destination.
- or -