Operation Manual

User’s manual SEAT Portable System
Troubleshooting - 133 -
It seems to me that the battery of my navigation device becomes flat
relatively quickly when the device is not connected to an external power
supply.
Some settings can be configured so that energy consumption is
minimised.
1. In the N
AVIGATION window tap on Options > Settings > General.
2. Set the values for Brightness Day and Brightness Night as low as
possible.
3. Tap on OK.
4. Tap on (Back).
The NAVIGATION window is now open again.
I have inserted a memory card but it is not detected. I am unable to play
the music or view the pictures on the memory card.
Try the following:
1. Make sure that the memory card is correctly inserted in the device.
2. Press the (On/Off) key and keep it pressed until the device
switches off (approx. 5 seconds).
3. Wait several seconds.
4. Press the (On/Off) key and keep it pressed until the device
switches on.
If the card is not detected again, it may be defective.
Note: Use only accessories that are recommended by NAVIGON
expressly for your navigation system. NAVIGON AG accepts no liability
for errors or damages resulting from the use of other accessories.
For suitable accessories go to www.navigon.com or your authorised
dealer.