NAVIGON 5100 max User’s Guide English (US) December 2008 Version 2.
Imprint NAVIGON, INC 200 W Madison Street Suite 650 Chicago, IL 60606 The information contained herein may be changed at any time without prior notification. This manual nor any parts thereof may not be reproduced for any purpose whatsoever without the express written consent of NAVIGON, INC, nor transmitted in any form either electronically or mechanically, including photocopying and recording. All technical specifications, drawings, etc., are subject to copyright law.
End User License Agreement (EULA) (SINGLE USE LICENSE) PLEASE READ THE FOLLOWING SOFTWARE LICENSE (THE “LICENSE”) BEFORE USING YOUR NAVIGON PRODUCT. BY USING YOUR NAVIGON PRODUCT, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THEM, OR DO NOT WANT THEM TO BE BINDING ON YOU, YOU SHOULD PROMPTLY RETURN THE NAVIGON PRODUCT TO THE PLACE WHERE YOU OBTAINED IT FOR A REFUND. 1. OWNERSHIP It is hereby understood and agreed by you that NAVIGON, Inc.
3. TERM The License is effective until terminated. Your rights under this License will terminate automatically without notice from NAVIGON if you fail to comply with any term(s) of this License. Upon the termination of this License, you shall cease all use of the Software. 4. RESTRICTIONS ON USE 4.1 You shall not transfer the Software to other suitable hardware devices without NAVIGON’s express, prior written consent. 4.
CLAIMS OR DAMAGES ARISING FROM SUCH USE IF YOU USE THE SOFTWARE, CONTENT OR HARDWARE DEVICE IN SUCH APPLICATIONS. 5. RESTRICTIONS ON TRANSFER 5.1 You may transfer, in whole, the Hardware Device, the Software and this License to another party if the other party agrees to accept the terms and conditions of this License. For the avoidance of doubt, you may not transfer the Software and related Content separately from the Hardware Device. 5.
YOU FROM NAVIGON OR THROUGH THE USE OF THE SOFTWARE OR CONTENT SHALL CREATE ANY WARRANTY NOT EXPRESSLY STATED IN THIS LICENSE. YOU UNDERSTAND AND AGREE THAT THE USE OF THE SOFTWARE AND CONTENT IS DONE AT YOUR OWN DISCRETION AND RISK AND THAT YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THE ABOVE EXCLUSION AND LIMITATIONS MAY NOT APPLY TO YOU. 7.
software; problems with equipment or services relating to your computers; problems with intermediate computer or communications networks or facilities; problems with data transmission facilities or your telephone or telephone services; unauthorized access, theft, operator errors, severe weather, earthquakes or labor disputes; or the termination of traffic data services or networks by service providers of same. 9.
NAVIGON. This License shall take precedence over any other documents that may be in conflict therewith. ADDITIONAL TERMS AND CONDITIONS OF USE RELATING TO THE TOTAL TRAFFIC NETWORK DATA PROVIDED WITH YOUR NAVIGON PRODUCT: A. Total Traffic Network, a division of Clear Channel Broadcasting, Inc., holds the rights to the traffic incident data and RDS-TMC network through which it is delivered.
NOTICE REGARDING NAVIGON FRESHMAPS FEATURE: Internet access is required to use the FreshMaps feature on your NAVIGON enabled product. Download performance can vary based on bandwidth speeds. When applicable, your NAVIGON FreshMaps subscription includes quarterly map updates. For NAVIGON FreshMaps accessory activation is purchased, you must register your product at www.navigonusa.com/freshmaps within 60 days from the date of purchase of the accessory to qualify for updates.
This page intentionally left blank. x NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Contents End User License Agreement (EULA) ....................................................................... iii Introduction About this User Guide.............................................................................. 1 Conventions ........................................................................................ 1 Symbols .............................................................................................. 1 Legal notice ........................................................
Viewing Version Information ............................................................. 15 Optional Accessory Services ................................................................. 16 Service Activation.............................................................................. 16 Activating ZAGAT POI Accessory ................................................ 16 Activating NAVIGON FreshMaps Accessory Service................... 18 Basic Operations First Time Startup ..................................
Changing a password ....................................................................... 34 Cancelling password protection ........................................................ 34 Forgotten your password?............................................................ 35 DirectHelp The DirectHelp Window .................................................................... 37 Using DirectHelp.................................................................................... 40 Calling a Direct Help POI....
Rating Ranges .................................................................................. 67 Price Ranges..................................................................................... 68 Rating Basis ...................................................................................... 68 Search for ZAGAT POIs.................................................................... 68 View ZAGAT POI Information ...........................................................
Ending simulation.............................................................................. 94 Viewing a Turn-by-Turn List................................................................... 95 Blocking route sections ..................................................................... 95 Removing blocks and using original routes....................................... 96 Maps Forty-Eight Contiguous United States Map .................................. 97 View information on the current map ..............
Connecting (Pairing) with a Mobile Phone........................................... 119 Establishing a connection from the navigation device .................... 119 Establishing a connection from the mobile phone........................... 120 Terminating the connection between the NAVIGON 5100 max and the mobile phone................................................................................... 121 Troubleshooting Hands-Free Operation ..............................................
General Settings ............................................................................. 139 Options Button ................................................................................ 140 Selecting options ................................................................................. 141 Moving between pages ................................................................... 141 Viewing a list of options for a setting...............................................
This page intentionally left blank. xviii NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Introduction About this User Guide Conventions For better legibility and clarification, the following styles are used in this manual: Italics: Registered names, company and product descriptions. SMALL CAPITALS: WINDOW, LIST, AND DIALOG BOX TITLES. Bold Italics: View modes. Bold: Descriptions of buttons, tabs, input fields and other elements on the screen. Symbols The following symbols refer to specific passages of text: Warnings. Instructions and tips for operating the software.
Introduction Legal notice Legal notice Liability The software and the manual are subject to change without notice. NAVIGON, INC is not liable for the accuracy of the information contained in this manual or for damages resulting from the use of this manual. Trademarks All brands and trademarks mentioned in this document are possibly registered by third parties and are subject to the current legislation and to the rights of their respective owners without reservation.
Introduction Customer Service Customer Service Visit the NAVIGON website (www.navigonusa.com/support/) to view our support page. On this page you can: • • • • • • • • Register your device. Search the NAVIGON database for commonly asked questions. Download navigation software updates. Send an e-mail to the support team. Call Customer Service. View or download User Guides. Report a problem. Report a map inaccuracy.
Introduction The NAVIGON Web Shop The NAVIGON Web Shop If you need accessories or accessory services for your device, please visit the NAVIGON web store at www.navigonusa.com/store/. 4 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Welcome Introducing Your NAVIGON 5100 max Welcome to the exciting world of handheld navigation. The NAVIGON 5100 max offers Global Positioning System (GPS)-based navigation and millions of Points Of Interest (POIs). With NAVIGON Lifetime Traffic accessory service, your navigation system can receive the latest traffic information available. If necessary, it can change your route dynamically in order to avoid traffic congestion.
Welcome Introducing Your NAVIGON 5100 max About GPS navigation The Global Positioning System (GPS) uses a constellation of 32 satellites that enable a GPS receiver to calculate its geographical position. For a sufficiently precise positioning it is necessary to obtain the data from at least three satellites. With the data from 4 or more satellites the altitude above sea level can also be ascertained. The positioning has an accuracy of about 3 yards.
Getting Started What’s included Your NAVIGON 5100 max comes with the following accessories. If the contents are incomplete, please notify us within 14 days of purchase. The purchased product includes: • • • • • • December 2008 Version 2.1 NAVIGON 5100 max navigation device Car cradle and device holder Car charger cable (12 volt adapter) with integrated TMC antenna. SD card containing software and navigation map(s) Quick Start Guide Warranty and Safety Flyer NAVIGON 5100 max User’s Guide NAVIGON, INC.
Getting Started Important safety information Important safety information Please read the following notices and safety information carefully before starting to use your navigation system. Navigation safety information Use this navigation system at your own risk. Caution! To prevent accidents, do not operate the navigation system while driving.
Getting Started Important safety information Safety information for the navigation device Caution! Do not use pointed or sharp-edged objects on your device’s touch screen. Your NAVIGON 5100 max is designed for use by simply tapping the touchscreen with your finger. Caution! Protect the device from moisture. The device is not waterproof and is not protected against water damage. Caution! Do not run cables directly next to safety-relevant devices and supply lines.
Getting Started Preparing your NAVIGON 5100 max for use Preparing your NAVIGON 5100 max for use Caution! Please be sure to read, understand, and follow the safety information in “Important safety information” on page 8. Charging the battery Note: A 12 volt car charger cable is included with your device. An A/C wall charger is also available as an optional accessory. Visit our web store www.navigonusa.com/store/.
Getting Started Preparing your NAVIGON 5100 max for use Inserting the memory card The SD memory card contains maps and navigation software. It also stores saved destinations, routes, and logbook entries. • Insert the memory card provided into the slot on the side of the device. Press the card into the device until it locks into place. Removing the memory card 1. To switch the navigation device to Standby, press and release the (On/ Standby/Off) button. 2.
Getting Started Installing the Car Mount Installing the Car Mount Assembling the Cradle • Assemble the cradle as shown below. (No tools are required.) Securing the Cradle Clean and dry the mounting surface and the suction cup on the base of the mount. These areas must be dry and free of dirt and grease. 1. Open the lever on the suction cup as far a possible. 2. Place the cradle suction cup against the mounting surface. 3. Press the suction cup lever down towards the mounting surface.
Getting Started Installing the Car Mount Placing the Navigation Device in the Cradle The holder has two small projections on the bottom and one on the top. These projections are designed to fit into corresponding slots on the bottom and top of the NAVIGON 5100 max. 1. Insert the navigation device into the holder by aligning the bottom projection slots on the bottom of the device. 2. Press the device towards the cradle until you hear the upper clip latch into place. 3.
Getting Started Installing the Car Mount Powering the navigation device Included with the NAVIGON 5100 max is a car charger cable with which power can be supplied to the navigation device using the vehicle's cigarette lighter. The car charger cable is connected to the NAVIGON 5100 max using the power connection port (Power) on the bottom of the device. Caution! The car charger cable is to be connected to cigarette lighters with an operating voltage of 12V only.
Getting Started Installing the Car Mount Viewing Version Information You can view software version information. This information may be required if you call for customer support. Version information is also useful when NAVIGON offers software and map updates. In the MAIN WINDOW: 1. Tap Options > Settings. On the SETTINGS WINDOW: 2. Tap Options > Product Information. 3. Use December 2008 Version 2.1 (Up) and (Down) to view all of the information. NAVIGON 5100 max User’s Guide NAVIGON, INC.
Getting Started Optional Accessory Services Optional Accessory Services The following accessory services are available for your NAVIGON 5100 max: • • ZAGAT Survey Ratings and Reviews Points of Interest (POIs). NAVIGON FreshMaps Accessory services are purchased separately. Service Activation Activating ZAGAT POI Accessory At a retail outlet where NAVIGON devices are sold: 1. Purchase an accessory card. 2.
Getting Started Optional Accessory Services The website requests your e-mail address, NAVIGON 5100 max product ID, and the Accessory card activation key. 10. Enter the requested information in the appropriate fields. The website returns your device unlock code, used to unlock the service on the device. The unlock code is also sent to your e-mail address. On your NAVIGON 5100 max: 11. On the PRODUCT ID WINDOW, tap Next. The DEVICE UNLOCK WINDOW displays. 12.
Getting Started Optional Accessory Services Activating NAVIGON FreshMaps Accessory Service Note: NAVIGON FreshMaps Disclaimer (General) NAVIGON FreshMaps is a subscription whose duration is limited to the period described on the purchased product. Internet access and a USB cable (that includes a TYPE-A connector and a MINI-B connector) are required to use NAVIGON FreshMaps. Microsoft Windows XP or Windows Vista is recommended.
Basic Operations First Time Startup When you first start your device, the LANGUAGE SELECTION WINDOW displays. Caution! Selecting the (Cancel) button during these steps will cause the NAVIGON device to cease operation and will require the user to reset the device. 1. Select the appropriate language and tap OK. The DISTANCE UNIT SELECTION WINDOW displays. 2. Select either Kilometers or Miles and tap OK. The CLOCK SETTING WINDOW displays. 3. Select either 12h (am/pm) or 24h and tap OK.
Basic Operations Starting the NAVIGON 5100 max 4. After you have read and fully understood the text, tap OK. Note: If you do not accept these instructions, tap Cancel to exit the navigation soft- ware. The MAIN WINDOW displays. You can change these settings at any time. For more information, see “General Settings” on page 139. Starting the NAVIGON 5100 max 1. Press and hold the (On/Standby/Off) button for two (2) seconds, then release.
Basic Operations Starting the NAVIGON 5100 max The MAIN WINDOW displays. Note: If you do not accept these instructions, tap Cancel to exit the navigation soft- ware. December 2008 Version 2.1 NAVIGON 5100 max User’s Guide NAVIGON, INC.
Basic Operations Starting the NAVIGON 5100 max The Main Window The MAIN WINDOW opens when the navigation software starts. You can reach all of the navigation software functions from this window. New Destination Tap this button to: • • • Select an address as a destination. (See page 47.) Select a POI as a destination. (See page 50.) Select a Direct Access POI. (See page 57.) My Destinations Tap this button to select a destination from: • • • A list of destinations you have saved. (See page 81.
Basic Operations Starting the NAVIGON 5100 max The Options Button Tap this button to: Activate an accessory service: • Activate ZAGAT Survey Ratings and Reviews POIs. (See page 16.) • Activate NAVIGON FreshMaps. Access the Route Planning window to: • Create a route. (See page 85.) • Save a route. (See page 88.) • Load a saved route. (See page 88.) • Run a simulation of a route. (See page 94.) Access the Settings window to set: • Navigation options. (See page 137.) • Route Profile options. (See page 138.
Basic Operations Starting the NAVIGON 5100 max Initializing the GPS receiver Note: If possible, position the device with a clear line of sight to the sky to successfully receive messages from the GPS satellites. Note: GPS initialization requires data from at least three satellites. If GPS data is not available, the receiver will not initialize. Note: It can take up to 20 minutes to initialize the integrated GPS receiver for the first time.
Basic Operations Starting the NAVIGON 5100 max Using Standby Mode Note: Use Standby mode only when your device will be unused for a very short time. If left in Standby mode for an extended period, battery drain can occur as the GPS receiver continues to draw power. For longer periods of inactivity, see “Turning off the NAVIGON 5100 max” on page 26. Note: To further conserve battery power, the device resets itself if left in Standby mode for a longer time. Standby mode conserves battery power.
Basic Operations Starting the NAVIGON 5100 max Turning off the NAVIGON 5100 max Note: When your device is not in use for an extended period of time, use this procedure to turn off your device and conserve battery power. 1. Press and hold the (On/Standby/Off) button on the top of the device. 2. Use a stylus or paper clip to press the reset button located on the bottom of the device case. 26 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Basic Operations Viewing device status Viewing device status Symbols located at the top right of the screen are used to display information. GPS The GPS symbol can show the following GPS reception status: No Symbol No Signal The built-in GPS receiver is not operational. Contact customer service if the problem persists. Data is being received from less than three satellites. Position cannot be calculated. GPS Ready Data is being received from at least three satellites. Position can be calculated.
Basic Operations Viewing device status Traffic Information (TMC) The NAVIGON 5100 max, with a car charger cable with integrated TMC antenna, provides the navigation system with up to date traffic messages. If necessary, it can alter the route dynamically in order to avoid a traffic jam. Note: This function is only available if TMC traffic messages are being transmitted in the map area in which you are traveling. Traffic messages are not available in all areas.
Basic Operations Viewing device status Phone/Bluetooth The NAVIGON 5100 max has integrated Bluetooth hands-free (Bluetooth) operation. This enables you to use the device as a hands-free kit for a mobile phone with Bluetooth capability. For more details see “Hands-Free Operation (Bluetooth)” on page 117. The Phone icon displays the following states of the hands-free operation: December 2008 Version 2.1 No Symbol Bluetooth is disabled.
Basic Operations Using Keyboards Using Keyboards Software keyboards appear on the screen when text entries are necessary. All entries can be made on the software keyboard using the fingertips. Only capital letters can be entered. Three keyboards are available for entering destination information. Note: When you need to enter a hyphen, use the space button in place of the hyphen. For example, to enter a hyphenated house number of 20-36 tap two, zero, space, three, six.
Basic Operations Using menus Special keys On the Alphabetic keyboard, enters a space character. This key is also used to enter a space in place of a hyphen. On the Alphabetic and Numeric keyboards, deletes the previous character and moves the cursor back one space. On the Alphabetic and Special Character keyboards, opens the Numeric keyboard. On the Numeric and Special Character keyboards, opens the Alphabetic keyboard. On the Alphabetic and Numeric keyboards, opens the Special Character keyboard.
Basic Operations Using menus 32 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Security By using a password, you can protect your navigation system from unauthorized use. Note: Password protection takes effect the next time the NAVIGON 5100 max is switched to standby mode. See “Using Standby Mode” on page 25. The Password Window Setting a password Note: If the screensaver is active, it must be disabled before setting a device password. Note: The password must be exactly 4 digits. In the MAIN WINDOW: 1. Tap Options > Settings The SETTINGS WINDOW opens. 2.
Security The Password Window Changing a password In the MAIN WINDOW: 1. Tap Options > Settings. The SETTINGS WINDOW opens. 2. Tap Options > Password Lock. The PASSWORD LOCK WINDOW opens. 3. 4. 5. 6. 7. Type the current password in the Enter Password field. Tap Change Password. Type the new password in the New password field and tap Next. Re-type the new password in the Confirm new password. Tap Activate. Cancelling password protection In the MAIN WINDOW: 1. Tap Options > Settings.
Security The Password Window Forgotten your password? After three unsuccessful attempts, the device displays the following message. 1. Record the device number shown on your device. 2. Call our customer support at: (888) 848-0701 (Toll Free) Monday through Friday, 7 a.m. to 9 p.m. CT (except official holidays) 3. Follow the instructions to reset your password. December 2008 Version 2.1 NAVIGON 5100 max User’s Guide NAVIGON, INC.
This page intentionally left blank. 36 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
DirectHelp The NAVIGON DirectHelp feature offers speedy access to emergency POIs. You can quickly find a telephone number and make an emergency call (when paired with a mobile phone), find an address, get directions, and drive to help. DirectHelp also provides you with directional distance to the nearest intersection, and your latitude/longitude location. This information can help emergency personnel quickly come to your assistance.
DirectHelp Longitude/Latitude The longitude and latitude of the location. Note: The format of the longitude and latitude can be changed. See “Selecting options” on page 141. Show on Map View your location on a map. Once a DirectHelp POI is selected, tapping this button centers the map on the location of the selected POI. The selected POI is shown as a gray circle.
DirectHelp DirectHelp returns up to 10 POIs within a 30 mile radius of your location, with the closest POI shown first. If no POIs are found, the following message displays: If no emergency POIs are found, seek assistance in the usual manner. December 2008 Version 2.1 NAVIGON 5100 max User’s Guide NAVIGON, INC.
DirectHelp Using DirectHelp Using DirectHelp From the MAIN WINDOW: 1. Tap Options > DirectHelp. The DIRECTHELP WINDOW opens. 2. Tap on the DirectHelp category button for the type of help you need. The DIRECTHELP DETAIL WINDOW displays. 3. Use the (Down) and (Up) buttons to select an emergency POI. 4. Tap the (Map) button to show the location of the selected emergency POI. 5. Tap the Start Navigation button to calculate a route to the POI.
DirectHelp Calling a Direct Help POI Calling a Direct Help POI Note: This feature is only available when the NAVIGON 5100 max is connected to a mobile phone using Bluetooth and the phone is within a coverage area. For more information, see “Connecting (Pairing) with a Mobile Phone” on page 119. 1. Tap Options > DirectHelp. The DIRECTHELP WINDOW opens. 2. Follow procedures in “Using DirectHelp” on page 40 to select an emergency POI. 3. Tap (Call) to call the selected emergency POI.
DirectHelp Calling a Direct Help POI 42 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Destination Selection Caution! Please be sure to refer to the safety information in “Important safety information” on page 8. New destinations for the NAVIGON 5100 max are destinations that you have not yet navigated to or those that you have not yet stored. You can enter an address, select a POI, or select a destination from the quick search function.
Destination Selection Search Areas The Search Area Tab When you select the New Destination button on the MAIN WINDOW, the SEARCH AREA keyboard opens. If you are selecting a destination for the first time, the tab appears blank. The (Search Area) tab, used to select a map area, is located at the top left corner of the destination selection window. Once an area is selected, a code on the button reflects the selection and the flag of the country appears above it.
Destination Selection Search Areas 4. Tap the next characters in the search area name. 5. When the correct state name is shown, tap (OK). Selecting a Search Area From a List When you enter the New Destination button on the Main window, the SEARCH AREA keyboard opens. To select an area, do the following: On the MAIN WINDOW: 1. Tap New Destination > Enter an Address. The DESTINATION SELECTION WINDOW opens. 2. Tap on the SEARCH AREA TAB. 3. Tap (Area List). A list of search areas displays. 4.
Destination Selection Ways to Search for Destinations Ways to Search for Destinations Enter an Address You can find an address by entering the state, city, street and house number. Search for a POI Note: Optional lifetime ZAGAT Survey Ratings and Reviews POI accessory service is available. For more information see “ZAGAT POIs (Optional Accessory)” on page 67. Points of Interest, (POIs) are useful locations that are organized according to particular criteria.
Destination Selection Entering an address Entering an address When searching for a location, you do not have to enter all of the address details. If you do not know the house number, leave the No. tab blank. On the Intersection tab, enter the name of a nearby cross street and the navigation system calculates a route to the intersection of the specified streets. In the MAIN WINDOW: 1. Tap New Destination > Enter an Address. The DESTINATION SELECTION WINDOW opens.
Destination Selection Entering an address 3. Enter the name of the destination street, then tap (OK). The NO. TAB opens. 4. Enter the house number, then tap (OK). If you do not know the house number: • Leave the No. tab blank. On the Intersection tab, enter the name of a nearby cross street and the navigation system calculates a route to the intersection of the specified streets. • Tap Start Navigation to route to just the street.
Destination Selection Entering an address 6. Tap Start Navigation. The map opens in Preview mode. For more information, see “Starting navigation” on page 65. December 2008 Version 2.1 NAVIGON 5100 max User’s Guide NAVIGON, INC.
Destination Selection Selecting a Point of Interest (POI) destination Selecting a Point of Interest (POI) destination POIs nearby Note: GPS reception must be sufficient to determine your current position. You can see if GPS reception is sufficient by looking at the mation, see “GPS” on page 27. (GPS Ready) symbol. For more infor- In the MAIN WINDOW: 1. Tap New Destination > Search for POI > Nearby. The CATEGORY tab opens. 2. Tap on the category from which you would like to select a POI.
Destination Selection Selecting a Point of Interest (POI) destination 4. Tap on the name of the destination. Information for the selected POI displays. 5. Tap Start Navigation. The map opens in Preview mode. For more information, see “Starting navigation” on page 65. December 2008 Version 2.1 NAVIGON 5100 max User’s Guide NAVIGON, INC.
Destination Selection Selecting a Point of Interest (POI) destination POIs in a specified city On the MAIN WINDOW: 1. Tap New Destination > Search for POI > in a City. The DESTINATION SELECTION WINDOW opens. The search area used in the previous search is shown on the SEARCH AREA TAB. Note: To select a different search area, tap on the SEARCH AREA TAB, and select the state. The CITY OR ZIP CODE tab opens. 2. Enter the city name or ZIP code, then tap (OK).
Destination Selection Selecting a Point of Interest (POI) destination 4. Tap on the subcategory from which you would like to select a POI. The DESTINATION TAB opens. 5. Tap on the name of the destination. If more than one location is found that matches your destination selection info, the NAVIGON 5100 max displays a list of locations. 6. Tap on the location you want. The DESTINATION TAB displays information on the selected POI. For more on POI information, see “Information about a POI” on page 59.
Destination Selection Selecting a Point of Interest (POI) destination 7. Tap Start Navigation. The map opens in Preview mode. For more information, see “Starting navigation” on page 65. 54 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Destination Selection Selecting a Point of Interest (POI) destination Statewide POIs In the MAIN WINDOW: 1. Tap New Destination > Search for POI > Statewide. The STATEWIDE POI WINDOW opens. 2. Tap on the category from which you would like to select a POI. The DESTINATION TAB opens. If more than one location is found that matches your destination selection info, the NAVIGON 5100 max displays a list of locations. 3. Tap on the name of the POI. The DESTINATION TAB displays information on the selected POI.
Destination Selection Selecting a Point of Interest (POI) destination For more on POI information, see “Information about a POI” on page 59. 4. Tap Start Navigation. The map opens in Preview mode. For more information, see “Starting navigation” on page 65. 56 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Destination Selection Selecting a Direct Access POI Selecting a Direct Access POI Note: Sufficient GPS reception is required for Direct Access POIs. You can check GPS reception by looking at the (GPS Ready) symbol. When you receive your device, the following 3 POI categories are selected for direct access: • • • Gas Stations Parking Restaurants. Note: To select other types of POIs for direct access, see “Specify Direct Access POI categories” on page 58. In the MAIN WINDOW: 1. Tap New Destination.
Destination Selection Selecting a Direct Access POI For more information, see “Starting navigation” on page 65. Specify Direct Access POI categories In the MAIN WINDOW: 1. Tap Options > Settings > General. 2. Use (Next Page) to go to PAGE TWO. 3. In the Direct Access 1 field, tap (List) and select a POI category. 4. Repeat the above step in the Direct Access 2 and Direct Access 3 fields. 5. When finished, tap OK to save the changes. 58 NAVIGON 5100 max User’s Guide NAVIGON, INC.
Destination Selection Selecting a Direct Access POI Information about a POI For many POI destinations, additional information is available. For example, telephone numbers are provided for many restaurants, allowing you to call the restaurant and reserve a table ahead of time. On the DESTINATION SELECTION WINDOW, the following buttons are available: Opens the DESTINATION INFO WINDOW and shows basic information about a POI, including address and phone number. Show the POI on a map. (GPS reception required.
Destination Selection Searching for POIs Near a Selected Location Searching for POIs Near a Selected Location With the NAVIGON 5100 max you can select a location, then search for POIs nearby. For example, if you are traveling for business you can search for restaurants close to your hotel. You can perform this type of search from anywhere - your home, hotel room, airport, etc. No GPS reception is required for this type of search. On the MAIN WINDOW: 1. Select the location.
Destination Selection Searching for POIs Near a Selected Location The DESTINATION SEARCH MODE WINDOW displays. 4. Tap the Search Nearby button. The CATEGORY TAB opens. 5. Select the POI category The SUB CATEGORY tab opens. 6. Tap on the subcategory from which you would like to select a POI. The DESTINATION TAB opens. The distance from your current location and the POI is shown. December 2008 Version 2.1 NAVIGON 5100 max User’s Guide NAVIGON, INC.
Destination Selection Searching for POIs Near a Selected Location 7. Tap on the location you want. The DESTINATION TAB displays information on the selected POI. For more on POI information, see “Information about a POI” on page 59. 8. Tap Start Navigation. For more information, see “Starting navigation” on page 65. 62 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Destination Selection Selecting a destination by tapping the map Selecting a destination by tapping the map You can select towns, streets, and even POIs by tapping on the map. On the MAIN WINDOW: 1. Tap > Show Map. The map opens in Preview mode. 2. Tap (Destination search) to display destination search tools. For more information on using destination search tools, see “Destination Search mode” on page 103. 3. Use the Destination search tools (zoom in, zoom out, pan, etc.
Destination Selection Selecting a destination by tapping the map The DESTINATION ON MAP WINDOW opens. Detailed address information for the selected destination displays in the upper left-hand corner. 6. Tap the Take Me There button. The map opens in Preview mode and shows the route calculated from your current location to this destination. For more information, see “Starting navigation” on page 65. 64 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Destination Selection Starting navigation Starting navigation With the map open in Preview mode, the destination is shown as a small flag. The route and the estimated trip time are displayed. With the map open in Preview mode: • Tap the Start Navigation button or simply start driving. Quitting navigation • Tap (Back) to quit navigation. A window prompts you to confirm.
This page intentionally left blank. 66 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
ZAGAT POIs (Optional Accessory) ZAGAT Survey Ratings and Reviews POIs can be purchased as an optional accessory service. Once purchased, ZAGAT information is provided for the lifetime of your NAVIGON 5100 max at no additional charge. For more on purchasing and activating this accessory, see “Optional Accessory Services” on page 16. With ZAGAT Survey Ratings and Reviews POIs, you can select from thousands of POIs and view customer survey ratings for a selected POI.
ZAGAT POIs (Optional Accessory) Zagat Ratings Price Ranges VE Very Expensive. E Expensive. M Moderate. I Inexpensive. Rating Basis Establishments are rated from 0 - 30, based on the following: ZAGAT POI Rated on: Cost Estimate Based on: Restaurants Food, Decor, and Service Price of dinner, one drink, and tip. Nightlife Appeal, Decor, and Service Cost of one drink. Hotels Rooms, Service, Dining, and Facilities High-season rate for a standard double room.
ZAGAT POIs (Optional Accessory) Zagat Ratings View ZAGAT POI Information On a POI DESTINATION SELECTION WINDOW: 1. Tap on a ZAGAT POI category. 2. If sub-categories exist for the category, tap the subcategory. 3. Tap on the name of a POI. The DESTINATION INFO WINDOW opens and displays basic POI information. 4. Tap Info to view ZAGAT survey information about the POI. The ZAGAT DETAIL WINDOW opens and displays detail information for the POI including hours of operation, costs, offered services, etc. 5.
This page intentionally left blank. 70 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
My Destinations My Destinations include a Favorites list of locations you have saved and a Last Destinations list of the last locations your performed a search for. These lists can be useful if you often navigate to particular locations. Saving a destination to the Favorites List 1. Enter a destination. (See “Destination Selection” on page 43.) 2. Tap Options > Save Destination. - OR – 1. Select a destination from MY DESTINATIONS. (See page 82.) 2. Tap Options > Save Destination.
My Destinations Saving a destination to the Favorites List Saving the current location using GPS The GPS STATUS WINDOW provides you with an overview of the data the navigation system calculates from the received GPS signals. In the MAIN WINDOW: 1. Tap Options > GPS status. The current location can be stored in the FAVORITES list. 2. Tap the Save Position button. The SAVE DESTINATION AS WINDOW opens. 3. In the Name field, enter the name for the destination. 4. Tap the Save button.
My Destinations Saving a destination to the Favorites List 2. Use the (Toggle) button to select: • Enter an Address - To enter your home address, or • Favorites - To select an address from your Favorites List. 3. Tap the OK button. If you selected Enter an Address, the DESTINATION SELECTION WINDOW displays. 4. Follow procedures for “Entering an address” on page 47. If you selected FAVORITES, the FAVORITES WINDOW displays. 5. Select your home address and tap (OK). 6. Tap Home Address.
My Destinations Navigating Home Navigating Home After saving an home address, you can navigate to your home from anywhere by tapping a single button. The first time you tap the Take Me Home button, you are asked to enter your address. 1. Follow procedures for “Saving your home address as a Favorite Destination” on page 72. In the MAIN WINDOW: 2. Tap the Take Me Home button. Navigation, using the current route profile information to calculate the route, begins.
My Destinations Importing Destinations from Outlook Importing Destinations from Outlook With NAVIGON Sync, you can download your Microsoft Outlook contacts to your NAVIGON 5100 max. The NAVIGON Sync software can be downloaded from our website, and installed on your computer. Once installed, Outlook contacts can be copied to your device. Once downloaded, contacts are stored in the device. Download and Install the NAVIGON Sync Software 1. Go to www.navigonusa.com/sync and follow on-screen instructions.
My Destinations Importing Destinations from Outlook The NAVIGON SYNC LICENSE AGREEMENT PAGE displays. 5. After you have read and fully understood the text: • If you agree, click I accept the terms in the License Agreement and click Next >. Note: If you do not accept these instructions, tap Cancel to exit the NAVIGON Sync setup. The CHOSE INSTALL LOCATION PAGE displays. 6. Specify the location on your computer where the NAVIGON Sync software will be installed, then click Install.
My Destinations Importing Destinations from Outlook The following page displays. 7. Click Finish to complete the installation. Copy Outlook Contact Information to the NAVIGON 5100 max After the NAVIGON Sync software is installed on your computer, you can copy Outlook contact information to your NAVIGON 5100 max. A copy of the information is saved on your device. The Outlook information on your computer is not affected. 1. Make sure that your computer and your NAVIGON 5100 max are powered on. 2.
My Destinations Importing Destinations from Outlook 5. Click on the Contacts folder that contains the information you want, then click OK. 6. On the NAVIGON SYNC WINDOW, at the top of the left hand pane, click Read from Outlook. The contact information from the selected folder appears in the left pane of the window. 7. For contacts to be added, to select: • All Outlook contacts - Click the Select All button. • A single contact - Click on the contact.
My Destinations Importing Destinations from Outlook The selected contacts are shown in the right pane. 9. In the lower right hand pane, click on Copy to Memory Card. The selected Outlook contacts have been saved on the device. These contacts can be accessed on the from the My Destinations button the NAVIGON 5100 max. Delete Outlook Contact Information From the NAVIGON 5100 max 1. Make sure that your computer and your NAVIGON 5100 max are powered on. 2.
My Destinations Importing Destinations from Outlook 5. For contacts to be removed, to select: • A single contact - Click on the contact. • A range of contacts, hold the Shift key down and click on the first and last contact in the range. • Individual contacts - Hold the Ctrl key down and click on each contact. 6. Click the Remove button. 7. To remove all contacts from the device, click Remove all. 80 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
My Destinations Selecting a saved destination Selecting a saved destination The following lists of destinations and addresses are available under My Destinations. Favorites Destinations you have stored in your NAVIGON 5100 max. Last Destinations Destinations you have previously navigated to. From Outlook Destinations you have imported from Outlook. Selecting a destination from the Favorites list Destinations to which you often travel can be saved in the FAVORITES list.
My Destinations Selecting a saved destination Selecting a destination from the Last Destinations list Your NAVIGON 5100 max saves the last 30 destinations to which you have navigated in the LAST DESTINATIONS LIST. In the MAIN WINDOW: 1. Tap My Destinations > Last Destinations. The LAST DESTINATIONS WINDOW displays. 2. Tap the destination to which you would like to navigate. 3. Tap the Start Navigation button. The map opens in Preview mode. For more information, see “Starting navigation” on page 65.
My Destinations Selecting a saved destination Selecting a destination Imported from Outlook In the MAIN WINDOW: 1. Tap My Destinations > Imported addresses. The IMPORTED DESTINATIONS WINDOW displays. 2. Tap the destination to which you would like to navigate. 3. Tap the Start Navigation button. The map opens in Preview mode. For more information, see “Starting navigation” on page 65. December 2008 Version 2.1 NAVIGON 5100 max User’s Guide NAVIGON, INC.
This page intentionally left blank. 84 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Routes With the NAVIGON 5100 max, you can preplan routes. Planned routes can be saved for later use, allowing you to create as many routes as you like. Route calculations and arrival times are based on the type of vehicle and the route type. Vehicle types (Speed Profiles) are: Standard car, Bicycle, or Pedestrian. Route types are Fast, Short, or Optimum. For more information on these settings See “Route Profile Settings” on page 138. Accessing the Route Planning Window In the MAIN WINDOW: 1.
Routes Accessing the Route Planning Window 2. Select: • Enter an Address to search for a location address. • Search for a POI to search for a POI. • My Destinations to select a location from the FAVORITES, IMPORTED ADDRESSES, or LAST DESTINATIONS lists. • My Address to select your home address. (Only available if you have already specified a home address.) • Current Location to specify your current position as the starting point. 3. Enter the starting point.
Routes Accessing the Route Planning Window Changing the order of route points Route points can be deleted from a route. The order of the route points can be varied as you wish. Note: The starting point (flow number "0") cannot be moved or deleted. To change the starting point, create a route point and move the new route point up to the top of the route. The old starting point can now be moved or deleted. On the ROUTE PLANNING WINDOW: • Tap on the route point that you want to edit.
Routes Managing routes Managing routes You can save each planned route under a particular name. Note: Only the start point and route points are saved. The calculated route is not. If you load a route that has been saved, it must be recalculated before navigation can begin. You can load, rename or delete stored routes. Saving routes You can save a route after you have entered the starting point and at least one route point. On the ROUTE PLANNING WINDOW: 1. Tap Options > Save Route. 2.
Routes Navigation Navigation After the route is calculated, you can begin navigation or view a simulation of the route. Using Logbook You can use the NAVIGON 5100 max to record your vehicle mileage for tax purposes or for expense reports. 1. Start Logbook recording. (See page 135.) 2. Create a new route, load a saved route, or select a destination. 3. Tap the Start Navigation button. The REASON FOR THE TRIP TAB opens. 4. Select a reason. The LOGBOOK ENTRY TAB opens. 5.
Routes Navigation 8. Follow navigation to your destination. Note: Once logbook recording starts, every movement of the vehicle is recorded, even when you are not navigating on-route. After reaching your destination, logbook stops recording and adds an entry to the Logbook.xls file. The Logbook icon no longer displays. Stop Logbook recording for a single route Once you have turned on logbook recording, you can stop recording for individual routes. 1. Start Logbook recording. (See page 135.) 2.
Routes Navigation Finding POIs at Highway Exits While traveling on a controlled access highway, you can find POIs (such as gas stations or lodging) at the next five exits along your route. Note: This feature is only available when traveling on controlled access roads, such as interstate highways. 1. Create a route or load a previously saved route. On the ROUTE PLANNING WINDOW: 2. Tap the Show Route button. The map opens in Preview mode and displays the calculated route. 3.
Routes Navigation 5. Tap Exit Guide. The EXIT POI WINDOW displays POI categories for the first exit. Only categories with one or more POIs at the next exit can be selected. If a category icon is unavailable, no POIs of that type are available at this exit. 6. To view POIs available at exits further ahead, tap (Next). 7. To view available POIs at an exit select a category button. The POI list for the category at this exit displays. 8. To add a POI to your route, tap 92 (Interim Destination).
Routes Navigation The POI is added to your route as an interim destination. When you are approaching the exit, the NAVIGON 5100 max provides navigation instructions to the POI. Note: If an exit POI interim destination is added after you have passed the exit, the NAVIGON 5100 max will take you off the originally calculated route and navigate you back to the POI. Remove an Exit POI from your Route If you change your mind, you can remove an exit POI from your route. During navigation: 1. Tap on the map.
Routes Simulating routes Simulating routes You can also view a simulation of a calculated route. Note: GPS signal reception is not required for simulation. Starting a route simulation You have calculated and displayed a route. With the route displayed in Preview mode: • Tap Options > Simulation. The route is recalculated for simulation purposes. Simulation begins once calculations have completed. Ending simulation You can end simulation at any time. While viewing the route simulation: • Tap (Back).
Routes Viewing a Turn-by-Turn List Viewing a Turn-by-Turn List You can display detailed directions of the calculated route before starting navigation or at any time during navigation. This list displays all of the driving instructions in table form. With the route displayed in Preview mode: • Tap the Turn-by-Turn List button. - or With the route displayed in Navigation mode or Reality View mode: • 1. 2. 3. 4. Tap Options > Turn-By-Turn List. The TURN-BY-TURN LIST WINDOW opens.
Routes Viewing a Turn-by-Turn List Removing blocks and using original routes Section blocks can be removed at anytime. On the TURN-BY-TURN LIST WINDOW: • 96 Tap Options > Calculate the Original Route. NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Maps Your NAVIGON 5100 max comes with a map of the 48 contiguous United States and the District of Columbia. Forty-Eight Contiguous United States Map View information on the current map On the MAIN WINDOW: 1. Tap Options > Settings > Map Display. The MAP DISPLAY WINDOW opens. 2. Use December 2008 Version 2.1 (Next Page) to go to PAGE TWO. NAVIGON 5100 max User’s Guide NAVIGON, INC.
Maps Map Preview mode Map Preview mode You have entered a destination and tapped the Start Navigation button. - OR – Create a route or load a saved route, then tap the Show Route button. The map opens in Preview mode. The entire route is visible. 1. The route is highlighted in orange. 2. A triangle in orange shows your current position. If you display a route and the specified starting point is not the same as your current location, the current position may not be shown on the preview. 3.
Maps Map Preview mode • • Options > Turn-by-Turn List to view detailed directions for the route. (See “Viewing a Turn-by-Turn List” on page 95.) (Destination search) to view the map in Destination search mode. For more information on using this feature, see “Destination Search mode” on page 103. December 2008 Version 2.1 NAVIGON 5100 max User’s Guide NAVIGON, INC.
Maps Map Navigation mode Map Navigation mode After the route has been viewed in Preview mode, navigation starts. Navigation is shown in Navigation mode. 1. 2. 3. 4. Signage to be followed is displayed here. Posted speed limits are displayed here (where available). The route is marked in orange. When two maneuvers need to be executed in quick succession, the small arrow indicates the second maneuver to be executed. 5. The large arrow shows a schematic depiction of the next maneuver.
Maps Map Navigation mode 11. (TMC shortcut button). The TMC shortcut button displays when traffic messages have been received and are currently available. Tap the button to display the TRAFFIC INFORMATION WINDOW. Note: The displays for many of the above mentioned fields can be configured using Options > Settings > Map Display. Information only displays when available. Note: If you tap on the large arrow, the current route instruction is repeated.
Maps Map Navigation mode Map functions in Navigation mode When the map is open in Navigation mode, tap any point on the map. Buttons with various functions are displayed. 2D/3D Changes between 2D and 3D map views. The symbol for the view currently set is marked orange. Day/Night Changes between "day" and "night" display. The symbol for the display currently set is marked orange. Interim Destination Opens a menu for entering an interim destination.
Maps Destination Search mode Destination Search mode When in Destination Search mode, crosshairs are shown and the map is always oriented with north up. Destination search tools include: Zoom Out The map section shown becomes larger, but fewer details are shown. Zoom In The map section becomes smaller, but shows more details. Zoom Mode When this button is active, you can plot a map section with your finger.
Maps Destination Search mode Operating in Destination Search mode 1. Tap on the point to which you wish to navigate. The destination that you have selected appears under the crosshairs. 2. Tap (OK). Buttons with various functions appear. Detailed address information for the selected destination displays in the upper lefthand corner. Tap for more information about the POI. Take Me There The navigation system calculates a route to the selected point as the new destination.
Maps Reality View Reality View When, during navigation, you approach a highway junction, the map changes to Reality View mode. Reality View mode shows the signage and lanes you must follow. This mode displays until you pass the highway junction. Once past the junction, the map returns to Navigation mode. While traveling through the highway junction to: • • Change from Reality View back to Navigation mode, tap anywhere on the screen.
This page intentionally left blank. 106 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
NAVIGON Lifetime Traffic NAVIGON Lifetime Traffic (TMC) Information allows your NAVIGON 5100 max to receive the latest traffic information available. If necessary, it can change your route dynamically in order to avoid a traffic jam. Note: This function is only available if TMC traffic messages are being transmitted in the area in which you are traveling. Traffic messages are not available in all areas.
NAVIGON Lifetime Traffic The TMC (Traffic Information) Window The TMC (Traffic Information) Window Types of Messages 108 All traffic information Information on all traffic events (severe and moderate traffic jams and obstructions) and weather warnings received in the area, based on TMC antenna reception. On route Information on all traffic events (severe and moderate traffic jams and obstructions) and weather warnings occurring along the route.
NAVIGON Lifetime Traffic The TMC (Traffic Information) Window Specify the type of traffic messages to display On the MAIN WINDOW: 1. Tap Options > Traffic. The TRAFFIC INFORMATION WINDOW opens. On the Navigation map, the (TMC shortcut) button can also be used to display the TRAFFIC INFORMATION WINDOW. The TMC shortcut button displays when traffic messages have been received and are currently available. See “Map Navigation mode” on page 100.
NAVIGON Lifetime Traffic The TMC (Traffic Information) Window Traffic Flow Severity Indicators The severity indicator reflects the impact of the traffic occurrence on traffic flow. The severity indicator appears as a color bar on the traffic list view. Indicators are Red Yellow None Heavy traffic, expect delays. Moderate impact to traffic. Minor impact to traffic flow.
NAVIGON Lifetime Traffic The TMC (Traffic Information) Window Displaying traffic messages The traffic reports that are currently valid are available from several windows. On the MAIN WINDOW: 1. Tap Options > Traffic. The TRAFFIC INFORMATION WINDOW opens. Above the list, the Traffic information button indicates the type of traffic information listed (on-route, off-route, etc.) and how many messages of this type are listed.
NAVIGON Lifetime Traffic The TMC (Traffic Information) Window Select Reroute Settings You can select whether the navigation software recalculates a route automatically when a TMC message indicates that a problem exists on your current route. On the TMC SETTINGS WINDOW: 1. Tap Options > TMC Settings. 2.
NAVIGON Lifetime Traffic Reroutes Reroutes Requesting a route recalculation Note: This procedure is only available when the TMC Setting Recalculate Route is set to On Request. For more information, see “Select Reroute Settings” on page 112. During navigation, a message displays when a traffic message indicates a traffic event exists on your current route. Details of the event are shown on the TMC DETAIL WINDOW. On the TMC DETAIL WINDOW: 1. Select how you want the traffic block to be handled.
NAVIGON Lifetime Traffic Reroutes Canceling a Reroute Calculation for a Traffic Event If you have set the navigation software to avoid an event and calculate another route, you can cancel the reroute request by tapping icon changes to (Detour) next to the event. The (Ignore) and the route is not recalculated. To change the icon back to Detour, tap the Ignore icon again. 114 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
NAVIGON Lifetime Traffic TMC Settings Window TMC Settings Window In the TMC SETTINGS WINDOW, you can set and configure the TMC receiver, these settings determine how received traffic messages will affect subsequent routing. On the MAIN WINDOW: 1. Tap Options > Traffic > Settings. Select another station On the TMC STATUS WINDOW: • Tap (To the Left) and (To the Right) to tune to another station. Note: Some stations do not have TMC information. Select Tuning Mode Settings On the TMC SETTINGS WINDOW: 1.
This page intentionally left blank. 116 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Hands-Free Operation (Bluetooth) Note: Hands-Free Operation is only available on supported Bluetooth mobile phones. With NAVIGON 5100 max, you can use Bluetooth to operate your mobile phone hands-free. The Hands-Free Main Window On the HANDS-FREE MAIN WINDOW, you can: Select this button to show a keypad to dial a phone number, enter a PIN Code, or select menu options in automated systems. This option is only available when the device is paired to a mobile phone.
Hands-Free Operation (Bluetooth) The Hands-Free Main Window Displaying the Hands-Free Main window In the navigation software: • Tap (Phone). The HANDS-FREE MAIN WINDOW opens. Changing hands-free volume You can adjust the volume of the hands-free independently of the volume of the navigation system. You can change call volume in two ways: To change the volume of the current call: • On the CALL IN PROGRESS WINDOW, tap (Volume) to change the volume. To change the volume of all calls: 1.
Hands-Free Operation (Bluetooth) Connecting (Pairing) with a Mobile Phone Connecting (Pairing) with a Mobile Phone Note: The Bluetooth functions of both the NAVIGON 5100 max and the mobile phone must be configured accordingly in order for a Bluetooth connection to be established between the two devices. For details of how to configure the NAVIGON 5100 max see “Setting Bluetooth Options” on page 133. For details of how to configure the mobile phone refer to the related manual.
Hands-Free Operation (Bluetooth) Connecting (Pairing) with a Mobile Phone 4. Tap on the name of your mobile phone. The navigation device prompts you to enter a PIN code. 5. In the PIN Code field, enter a four-digit number. Note: A PIN code can be any four digits. However, the same 4 digit PIN code must be entered on the mobile phone in order to complete the pairing. 6. Tap OK. On the mobile phone: Your mobile phone prompts you to enter a PIN code. 7.
Hands-Free Operation (Bluetooth) Connecting (Pairing) with a Mobile Phone The mobile phone prompts you to enter a PIN code. Note: A PIN code can be any four digits. However, the same 4 digit PIN code must be provided to the navigation device in order to complete the pairing. 5. Enter a four-digit PIN code. On the navigation device: The NAVIGON 5100 max prompts you to enter a PIN code. 6. In the PIN Code field, enter the same PIN code that you entered on the mobile phone. 7. Tap OK.
Hands-Free Operation (Bluetooth) Troubleshooting Hands-Free Operation Troubleshooting Hands-Free Operation The NAVIGON 5100 max must be connected to a mobile phone in order for you to use the telephone functions. After the first connection, your NAVIGON 5100 max will automatically reconnect with your phone each time it comes into range. Problems occurring when trying to establish a Bluetooth connection can have various causes: • Bluetooth is deactivated in the hands-free of the NAVIGON 5100 max.
Hands-Free Operation (Bluetooth) Answering a call Answering a call When you receive a call, the INCOMING CALL WINDOW opens. A message asks whether you want to take the call. To ignore the call: • Tap No. To take the call: • Tap Yes. The name and the number of the caller will be displayed if this information is available. The CALL IN PROGRESS WINDOW opens. Note: Navigation instructions continue during a call. October 2008 Version 2.0 NAVIGON 5100 max User’s Guide NAVIGON, INC.
Hands-Free Operation (Bluetooth) Making a call Making a call With the NAVIGON 5100 max you can make a call in various ways: • • • • Dialing a telephone number. Dialing a Speed Dial number. Dialing a contact from the Address Book. Calling missed, most recently dialed, or received numbers. Note: Navigation instructions continue during a call. Dialing a telephone number In the Navigation software: 3. Tap (Phone). The HANDS-FREE MAIN WINDOW appears. 4. Tap Keypad. The HANDS-FREE KEYPAD WINDOW opens. 5.
Hands-Free Operation (Bluetooth) Making a call 2. Tap the desired Speed Dial button. Note: If a Speed Dial button has not been set up, or if a Bluetooth connection to the mobile phone has not been established, the HANDS-FREE MODIFY SPEED DIAL WINDOW displays. Dialing a contact from the Address Book Note: This feature is only available on supported Bluetooth mobile phones. Note: Depending on your mobile phone, only phones numbers may display. Contact names may not be shown.
Hands-Free Operation (Bluetooth) Making a call Calling missed, most recently dialed, or received numbers Note: This feature is only available on supported Bluetooth mobile phones. On the NAVIGON 5100 max, the RECENT CALLS WINDOW lists missed, answered and outgoing calls. Note: Missed calls are shown first, then dialed calls, then answered calls. Note: Recent calls may not be shown in chronological order. Note: Incoming and unanswered calls can only be dialed if the caller's number was transmitted.
Hands-Free Operation (Bluetooth) During a call During a call During a call, the CALL IN PROGRESS WINDOW displays. Moving the navigation application to the foreground You can move the navigation application to the foreground at any time. In this way you can have the map in the foreground during a call when the NAVIGON 5100 max is in the process of navigating. • Tap (Navigation). While a mobile phone is connected to the navigation device, the mobile phone) is shown in the top right corner of the window.
Hands-Free Operation (Bluetooth) Ending the call Placing the Microphone on Mute During a call you can place the NAVIGON 5100 max microphone on mute. To mute the microphone: • Tap (Mute). The mute button displays in red . To turn the microphone back on: • Tap (Mute) again. Transferring a call to the mobile phone On the CALL IN PROGRESS WINDOW: 1. Tap Options > Use Mobile Phone. 2. Pick up the mobile telephone and continue the call.
Hands-Free Operation (Bluetooth) Configuring the Hands-Free function Configuring the Hands-Free function With NAVIGON 5100 max, you can use Bluetooth to operate your mobile phone hands-free. The Hands-Free Settings Window On the HANDS-FREE SETTINGS WINDOW, you can: Select this button to connect your NAVIGON 5100 max to your mobile phone. See “Connecting (Pairing) with a Mobile Phone” on page 119 for more information. Select this button to set up to four speed dial phone numbers.
Hands-Free Operation (Bluetooth) The Hands-Free Settings Window Adding a New Speed Dial Number The NAVIGON 5100 max hands-free has four Speed Dial buttons that can be set for frequently called numbers. On the HANDS-FREE MAIN WINDOW: 1. Tap Settings > Speed Dial. The SPEED DIAL WINDOW displays. 2. Tap on an available Speed Dial line. The MODIFY SPEED DIAL WINDOW displays. 3. Tap Edit. 4. Enter the name and the number for the Speed Dial button. 5. Tap OK.
Hands-Free Operation (Bluetooth) The Hands-Free Settings Window Adding an Address Book Number to Speed Dial Note: The NAVIGON 5100 max must be connected to the mobile phone to add a Speed Dial number from the mobile phone’s address book. Note: Speed dial numbers are stored in the device memory. On the HANDS-FREE MAIN WINDOW: 1. Tap Settings > Speed Dial. The SPEED DIAL WINDOW displays. 2. Tap on an available Speed Dial button. The MODIFY SPEED DIAL WINDOW displays. 3. Tap From Address Book.
Hands-Free Operation (Bluetooth) The Hands-Free Settings Window The name and the number for the Speed Dial button are shown. 4. Enter the new information for the Speed Dial button. 5. When finished, tap OK. The updated entry displays on the MODIFY SPEED DIAL WINDOW. 6. Tap OK to save the information. Deleting a Speed Dial Number On the HANDS-FREE MAIN WINDOW: 1. Tap Settings > Speed Dial. The SPEED DIAL WINDOW displays. 2. Tap on the Speed Dial line to be deleted. The MODIFY SPEED DIAL WINDOW displays. 3.
Hands-Free Operation (Bluetooth) The Hands-Free Settings Window Setting Bluetooth Options In the HANDS-FREE MAIN WINDOW: • Tap Settings > Bluetooth Function. The BLUETOOTH SETTINGS WINDOW opens. On this window, set the following options: Bluetooth Function Select whether you want to activate the Bluetooth function (Yes or No). The hands-free cannot connect to a mobile phone if the Bluetooth function is deactivated.
This page intentionally left blank. 134 NAVIGON 5100 max User’s Guide NAVIGON, INC. October 2008 Version 2.
Logbook You can use the NAVIGON 5100 max to record your vehicle mileage for tax purposes or for expense reports. The logbook is recorded in the Logbook.xls file. You can open the file with Microsoft Excel spreadsheet program. Each recorded trip is added to the spreadsheet as a new entry. When first used, the Logbook.xls file is created in the MN7\Logbook directory on the navigation device flash memory. If you delete or move this file, a new file is created when you next record a trip.
This page intentionally left blank. 136 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Customization Accessing the Settings window The settings can be reached from several windows. • Tap Options > Settings. The Settings Window The SETTINGS WINDOW is where you can customize your NAVIGON 5100 max to suit your personal needs and preferences. The SETTINGS WINDOW has several buttons. • Tap a button to open the corresponding settings window. Navigation Settings These settings include: Show Speed Limits Select whether to show highway speed limits.
Customization The Settings Window Show Altitude and Speed Show or hide the altitude and current speed on a displayed map. Indication of Travel Time Show either the estimated time of arrival or the remaining time to the destination (or an interim destination, if applicable). Display Compass Show or hide a small compass on screen during navigation. Announce Street Names Indicate whether or not to hear the street names announced.
Customization The Settings Window representation of an approaching junction. Highway signs and the lane to be used are indicated. (This feature is dependent on the selected map and may not be available in all areas.) 3D Maps: Show Street Names Show or hide street names when displaying the map in 3D view. 2D Maps: Show Street Names Show or hide street names when displaying the map in 2D view. 2D Zoom Factor Indicate how auto-zoom behaves by default when a 2D view mode is selected.
Customization The Settings Window format (with am and pm), or a 24 hour format. Distance Unit Indicate the distance unit to be used, either Miles or Kilometers. Coordinate Format If coordinates are shown, indicate whether they display in decimal format or in degrees, minutes, and seconds format. Screensaver Indicate whether a screensaver should display after a period of inactivity. Language Select the language to be displayed on screen and to be used with spoken directions.
Customization Selecting options Selecting options Moving between pages Some NAVIGON 5100 max settings require several windows, as shown in the example above (Page 2 of 4). To move between windows: • Tap (To the Left) and (To the Right). Viewing a list of options for a setting Some settings have several values. A value can be selected from a list. The value that is currently valid is shown. 1. Tap (List). A list with all potential values opens. The value that is currently valid is marked. 2.
Customization Selecting options Changing an option setting After changing an option setting: • • To save the change, tap the OK button. To discard the change, tap the Cancel button. The SETTINGS WINDOW re-displays. 142 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Legal Notices NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA State law prohibits drivers in California and Minnesota from using mounts on their windshields while operating motor vehicles. NAVIGON does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71) GPS Underwriters Laboratories Inc.
This page intentionally left blank. 144 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Technical Data Specifications Dimensions 4.83" x 3.03" x 0.74" Weight approx. 6.27 ounces Operating conditions Operating temperature -10°C to 60°C Storage temperature -30°C to 70°C Humidity 0% to 90%, non-precipitating CPU Samsung 400MHz Operating System Microsoft Windows CE .Net 5.0 Display 4.
Technical Data Compliance Notices Compliance Notices The NAVIGON 5100 max complies with Part 15 of the FCC interference limits for Class B digital devices for home or office use. “Operation is subject to the following two conditions: (1) this device may not cause interference,and (2) this device must accept any interference, including interference that may cause undesired operation of the device.” (Carrier frequency: 1575.
Technical Data Compliance Notices Canada Notices This class [B] digital device is consistent with Canada's standard NMB-003. This category II radio communication device meets Canada Industry Convention CNR310. December 2008 Version 2.1 NAVIGON 5100 max User’s Guide NAVIGON, INC.
Technical Data Compliance Notices 148 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
Index A accessory services ............................................. 16 activation NAVIGON Freshmaps ........................... 18 NAVIGON Lifetime Traffic ...................... 16 ZAGAT POIs ......................................... 16 activation confirmation ZAGAT POIs ......................................... 17 arriving at your destination ............................65, 96 B battery charging ........................................................ 10 LED indicator ..............................
DirectHelp window .............................................. 37 installation safety .................................................. 9 E K e-mail support ....................................................... 3 end user license ....................................................iii ending a route simulation .......................................... 94 entering an address ............................................ 47 EULA ....................................................................
Favorites saving a destination ............................... 71 saving the current location using GPS .... 72 saving your home address ..................... 72 selecting a saved destination ......................... 81 from the Favorites List ........................... 81 from the Last Destinations List ............... 82 imported from Outlook ........................... 83 N navigation ........................................................... 89 arriving at your ......................................
changing a starting point ................................ 86 changing the order of route points .................. 87 entering a route point ..................................... 86 entering a starting point ................................. 85 finding POIs at highway exits ......................... 91 manage ......................................................... 88 loading .................................................. 88 saving ................................................... 88 navigation ....
blocking route sections .................................. 95 removing route section blocking ..................... 96 turning on the device .......................................... 20 U using a password ................................................ 20 using standby ...................................................... 25 from any device window ................................. 25 from the Main window .................................... 25 using the keyboard ........................................
This page intentionally left blank. Index-6 NAVIGON 5100 max User’s Guide NAVIGON, INC. December 2008 Version 2.
