Operation Manual

User’s manual NAVIGON Live Services
- 126 - Before you begin
Caution! Connect the car charger cable only to cigarette lighters with
an operating voltage of 10-24V.
Note: Insert the USB connector securely in the corresponding USB
sockets!
Caution! Be sure to refer to all the safety information in chapter
"Important safety information" on page 122.
2.5.4 Activating the NAVIGON Live services
The NAVIGON Live services must be activated before they are used
for the first time. Then they can be used free of charge for 3 months.
(Refer to "Costs" on page 121)
The NAVI
GON Live module is connected to the navigation device.
The leaflet with the activation code which came with the NAVIGON Live
module is to hand.
1. Switch on the navigation device.
► Enter the password if necessary.
► If you see a Navigation button: Tap on it. (The window with this
button does not exist on all navigation devices with which the
NAVIGON Live services can be used.)
The N
AVIGATION window opens.
2. Tap on
(NAVIGON Live).
You will be asked whether you want to activate the NAVIGON Live
services.
3. Tap on Yes
.
4. Enter the activation code.
5. Tap on Activate
.
The NAVIGON Live services are now activated.
6. Tap on OK
.
The following message appears: "The navigation device sends
Floating Car Data to the NAVIGON Live server. Analysing data from
many users helps to identify traffic congestions more quickly and to
calculate diversion routes more reliably. It also enables arrival times
to be calculated more precisely. You can disable the sending of
floating car data. To do so, open the NAVIGON Live services
settings and set the 'Send Floating Car Data' value to 'No'."