Operation Manual

User’s manual NAVIGON 8410
Troubleshooting - 109 -
5. Tap on (Phone).
6. Tap on Settings
> Bluetooth Settings.
7. Set Bluetooth Function
to No.
8. Tap on OK
.
9. Tap on
(Navigation).
The N
AVIGATION window is now open again.
I have accidentally activated demo mode.
If you have accidentally activated demo mode when you start the
navigation application for the first time, you can deactivate it again as
follows:
1. In the N
AVIGATION window, tap on Options > Settings.
The S
ETTINGS window is opened.
2. Tap on Options
> Factory Settings.
You will be prompted to confirm that you want the device reset to
the as-delivered state.
3. Tap on the Yes
button.
The software is re-started and behaves as if started for the first time
after being purchased (refer to "Switching on the NAVIGON 8410"
on page 16).
Start the navigati
on software and set the Start in Demo Mode
setting to No
. (Refer to "Starting the navigation application" on
page 26)
Note: Use only accessories which are recommended by NAVIGON
expressly for the NAVIGON 8410. NAVIGON AG accepts no liability for
errors or damages resulting from the use of other accessories.
For suitable accessories go to www.navigon.com
or your authorised
dealer.